Effect of different primer agents on shear bond strength of ceramic orthodontic brackets bonded to zirconia ceramics
Source abstract
Abstract
© 2022, The Author(s) under exclusive licence to Australian Ceramic Society.The aim of this in-vitro study is to compare the shear bond strengths of ceramic brackets bonded to zirconia surfaces by using different primers. Forty rectangular-shaped zirconia blocks were manufactured at 10 × 5 × 2.5 mm. Zirconia surfaces were sandblasted with 30-μm aluminum-oxide particles. Afterward, thermocycling for 2000 cycles and a shear bond strength test was applied. Universal primer (Monobond-Plus, Z Prime Plus, Clearfil) was applied to all specimen surfaces. The upper central ceramic brackets were bonded with light cure adhesive paste (3 M Transbond XT) to zirconia surfaces. The samples were equally divided into four groups according to the primer used in the bonding procedure: group I (control group), group II (Clearfil group), group III (Monobond-Plus group), group IV (Z Prime Plus group). The Z Prime Plus adhesive primer showed statistically higher shear bond strength values than that in the Monobond-Plus and control group. The results in the control group were statistically significantly different from the values obtained in all other groups. Monobond Plus, Z-Prime Plus, and Clearfil ceramic primer agents can be effective methods for bonding zirconia restorations with ceramic orthodontic brackets.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Orthodontics and Dentofacial Orthopedics · Dental Research and COVID-19
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Proffit, W.R., Fields, H.W., Sarver, D.M.: Contemporary Orthodontics, 5th edn. Mosby, St. Louis (2013)
2. Bielen, V., Inokoshi, M., Munck, J.D., et al.: Bonding effectiveness to differently sandblasted dental zirconia. J. Adhes. Dent. 17(3), 235–242 (2015)
3. Akay, C., Tanış, M., Mumcu, E., et al.: Influence of nano alumina coating on the flexural bond strength between zirconia and resin cement. J. Adv. Prosthodont. 10(1), 43–49 (2018)10.4047/jap.2018.10.1.43 ↗
4. Tanış, M., Akay, C., Karakış, D.: Resin cementation of zirconia ceramics with different bonding agents. Biotechnol. Biotechnol. Equip. 29(2), 363–367 (2015)10.1080/13102818.2014.996606 ↗
5. Birnie, D.: Ceramic brackets. Br. J. Orthod. 17(1), 71–74 (1990)10.1179/bjo.17.1.71 ↗
6. Karamouzos, A., Athanasiou, A.E., Papadopoulos, M.A.: Clinical characteristics and properties of ceramic brackets: a comprehensive review. Am. J. Orthod. Dentofac. Orthop. 112(1), 34–40 (1997)10.1016/S0889-5406(97)70271-3 ↗
7. Swartz, M.L.: Ceramic brackets. J. Clin. Orthod. 22(2), 82–88 (1988)
8. Lee, J.Y., Kim, J.S., Hwang, C.J.: Comparison of shear bond strength of orthodontic brackets using various zirconia primers. Korean J. Orthod. 45(4), 164–170 (2015)10.4041/kjod.2015.45.4.164 ↗
9. Grewal Bach, G.K., Torrealba, Y., Lagravère, M.O.: Orthodontic bonding to porcelain: a systematic review. Angle. Orthod. 84(3), 555–560 (2014)10.2319/083013-636.1 ↗
10. Reynolds, I.R., von Fraunhofer, J.A.: Direct bonding of orthodontic brackets–a comparative study of adhesives. Br. J. Orthod. 3(3), 143–146 (1976)10.1179/bjo.3.3.143 ↗
11. Kern, M., Wegner, S.M.: Bonding to zirconia ceramic: adhesion methods and their durability. Dent. Mater. 14(1), 64–71 (1988)10.1016/S0109-5641(98)00011-6 ↗
12. Reisner, K.R., Levitt, H.L., Mante, F.: Enamel preparation for orthodontic bonding: a comparison between the use of a sandblaster and current techniques. Am. J. Orthod. Dentofacial. Orthop. 111(4), 366–373 (1997)10.1016/S0889-5406(97)80018-2 ↗
13. Kim, B.K., Bae, H.E., Shim, J.S., Lee, K.W.: The influence of ceramic surface treatments on the tensile bond strength of composite resin to all-ceramic coping materials. J. Prosthet. Dent. 94(4), 357–362 (2005)10.1016/j.prosdent.2005.08.012 ↗
14. Zachrisson, Y.O., Zachrisson, B.U., Büyükyilmaz, T.: Surface preparation for orthodontic bonding to porcelain. Am. J. Orthod. Dentofacial. Orthop. 109(4), 420–430 (1996)10.1016/S0889-5406(96)70124-5 ↗
15. Bourke, B.M., Rock, W.P.: Factors affecting the shear bond strength of orthodontic brackets to porcelain. Br. J. Orthod. 26(4), 285–290 (1999)10.1093/ortho/26.4.285 ↗
16. Bishara, S.E., Olsen, M.E., VonWald, L., et al.: Comparison of the debonding characteristics of two innovative ceramic bracket designs. Am. J. Orthod. Dentofac. Orthop. 116(1), 86–92 (1999)10.1016/S0889-5406(99)70307-0 ↗
17. Viazis, A.D., Cavanaugh, G., Bevis, R.R.: Bond strength of ceramic brackets under shear stress: an in vitro report. Am. J. Orthod. Dentofac. Orthop. 98(3), 214–221 (1990)10.1016/S0889-5406(05)81598-7 ↗
18. Odegaard, J., Segner, D.: Shear bond strength of metal brackets compared with a new ceramic bracket. Am. J. Orthod. Dentofac. Orthop. 94(3), 201–206 (1988)10.1016/0889-5406(88)90028-5 ↗
19. Ghafari, J., Skanchy, T.L., Mante, F.: Shear bond strengths of two ceramic brackets. J. Clin. Orthod. 26(8), 491–493 (1992)
20. Joseph, V.P., Rossouw, E.: The shear bond strengths of stainless steel and ceramic brackets used with chemically and light-activated composite resins. Am. J. Orthod. Dentofac. Orthop. 97(2), 121–125 (1990)10.1016/0889-5406(90)70084-P ↗
21. Kwak, J.Y., Jung, H.K., Choi, I.K., Kwon, T.Y.: Orthodontic bracket bonding to glazed full-contour zirconia. Restor. Dent. Endod. 41(2), 106–113 (2016)10.5395/rde.2016.41.2.106 ↗
22. Ebert, T., Elsner, L., et al.: Shear bond strength of brackets on restorative materials: comparison on various dental restorative materials using the universal primer Monobond® Plus. J Orofac. Orthop. 77(2), 73–84 (2016)10.1007/s00056-016-0011-y ↗
23. Cetik, S., Ha, T.H., Sitri, L., et al.: Comparison of shear strength of metal and ceramic orthodontic brackets cemented to zirconia depending on surface treatment: an ın vitro study. Eur. J. Dent. 13(2), 150–155 (2019)10.1055/s-0039-1694304 ↗
24. Magne, P., Paranhos, M.P., Burnett, L.H.: New zirconia primer improves bond strength of resin-based cements. Dent. Mater. 26(4), 345–352 (2010)10.1016/j.dental.2009.12.005 ↗
25. Dumbryte, I., Vebriene, J., et al.: Enamel microcracks in the form of tooth damage during orthodontic debonding: a systematic review and meta-analysis of in vitro studies. Eur. J. Orthod. 40(6), 636–648 (2018)10.1093/ejo/cjx102 ↗
26. Whitlock, B.O., Eik, J.D., Ackerman, R.J., et al.: Shear strength of ceramic brackets bonded to porcelain. Am. J. Orthod. Dentofac. Orthop. 106(4), 358–364 (1994)10.1016/S0889-5406(94)70056-7 ↗
27. Newman, G.V.: Epoxy adhesives for orthodontic attachments: progress report. Am. J. Orthod. 51(12), 901–912 (1965)10.1016/0002-9416(65)90203-4 ↗
28. Franz, A., Raabe, M., Lilaj, B., et al.: Effect of two different primers on the shear bond strength of metallic brackets to zirconia ceramic. BMC Oral Health 19(1), 51 (2019)10.1186/s12903-019-0740-6 ↗
29. Kitayama, S., Nikaido, T., Takahashi, R., et al.: Effect of primer treatment on bonding of resin cements to zirconia ceramic. Dent. Mater. 26(5), 426–432 (2010)10.1016/j.dental.2009.11.159 ↗
30. Milagres, F.D.S.A., Olivera, D.D., Silveira, G.S., et al.: Bond strength and failure pattern of orthodontic tubes adhered to a zirconia surface submitted to different modes of application of a ceramic primer. Materials (Basel) 12(23), 3922 (2019)10.3390/ma12233922 ↗
31. Byeon, S.M., Lee, M.H., Bae, T.S.: Shear bond strength of Al2O3 sandblasted Y-TZP ceramic to the orthodontic metal bracket. Materials (Basel) 10(2), 148 (2017)10.3390/ma10020148 ↗