Development of using local raw materials deposits in Eskisehir region, Turkey
Source abstract
Abstract
Local clayey raw materials and feldspathic rocks of Eskisehir sources were characterized, and its influence in facade cladding tile compositions was evaluated. Dilatometric studies for disclosing peak firing temperatures and regimes showed significant and substantial linear shrinkages as densification proceeded. The results also indicated that the standard composition did not resist over 920 °C. Body compositions containing feldspathic rocks yielded the lowest water absorption and highest strength values at 1160 °C due to improved densification. SEM of a selected sample at 1160 °C showed the presence of uniformly distributed, spherical and isolated pores in the matrix. In addition, water absorption values were advanced in group AIIa European standards (EN 14411), breaking strength increased and acceptable colours were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Uz, V., Ceylan, A., Yilmaz, B., Ozdag, H.: Plasticity and drying behavior of terra cotta bodies in the presence of cellulose, in Applied Clay Science. 42, 675–678 (2009)
2. Haurine, F., Cojan, I., Bruneaux, M.: Development of an industrial mineralogical framework to evaluate mixtures from reservoir sediments for recovery by the heavy clay industry: Application of the Durance system (France), in Applied Clay Science. CLAY-03932, 10 (2016)10.1016/j.clay.2016.07.022 ↗
3. Das, S.K., Dana, K., Singh, N., Sarkar, R.: Shrinkage and strength behaviour of quartzitic and kaolinitic clays in wall tile compositions, in Applied Clay Science. 00329(2), 137–143 (2005)10.1016/j.clay.2004.10.002 ↗
4. Hinkley, D.N.: Variability in crystallinity values among the Kaolin deposits of the coastal plain of Georgia and South Carolina, Proceedings of the 11th National Conference on Clays and Clay Minerals (Ottawa, Ontario, Canada), pp. 229–235 (1962)10.1346/CCMN.1962.0110122 ↗
5. Kingery, W.D.: Introduction to ceramics Wiley, New York, pp. 78–79, pp. 532–540 (1976)
6. Murray, H.H., Keller, W.D.: Kaolin genesis and utilization, In: Murray, H.H., Bundy, W., Harvey, C. (Eds.) Clay Minerals Society, Special Publication, vol. 1, pp. 1–24 (1993)10.1346/CMS-SP-1 ↗
7. Moore, D.M., Reynold, R.C.: X-ray diffraction and the identification and analysis of clay minerals, 2nd edn. Oxford University Press, New York (1997) pp. 227–260
8. Carty, W.M., Senapati, U.: Porcelain-raw materials, processing, phase evolution and mechanical behaviour. J Am Ceram Soc. 81(1), 3–20 (1998)10.1111/j.1151-2916.1998.tb02290.x ↗
9. Hornbostel, C.: Construction materials: types, uses and applications (2nd Ed.), Wiley, pp. 212 (1991)
10. Bender, W., Handle, F.: Brick and tile making bauverlag, pp. 73–89
11. Daday, M.: Investigation of process parameters for extruded fast fired terracotta facade tile production, PhD Thesis, Anadolu University, Eskisehir, Turkey (2015)
12. Kurama, S., Kara, A., Kurama, H.: The effect of boron waste in phase and microstructural development of a terracotta body during firing. J Eur Ceram Soc. 26, 755–760 (2006)10.1016/j.jeurceramsoc.2005.07.039 ↗
13. Pancar, Y.; Tuğla-kiremit Endüstrisinde Pişmiş Atıkların Değerlendirilebilirliğinin Araştırılması (in Turkish), Anadolu University, Graduate School of Science (2001)
14. Ferrer, S., Mezquita, A., Gomez-Tena, M.P., Machi, C., Monfort, E.: Estimation of the heat of reaction in traditional ceramic compositions, in Applied Clay Science. 108, 28–39 (2015)