journal article·2002-04

Effects of Yttria‐Stabilized Zirconia on Plasma‐Sprayed Hydroxyapatite/Yttria‐Stabilized Zirconia Composite Coatings

Lei Fu, Khiam Aik Khor, Joo Peng Lim

Publisher page

Abstract

The low bonding strength between hydroxyapatite (HA) and the metal substrate interface of plasma‐sprayed HA coating has been a point of potential weakness in its application as a biomedical prosthesis. In the present study, yttria‐stabilized (8 wt%) zirconia (YSZ) has been used to enhance the mechanical properties of HA coatings. The effects of YSZ additions (in the range 10–50 wt%) on the phase composition, microstructure, bond strength, elastic modulus, and fracture toughness of plasma‐sprayed HA/YSZ composite coatings have been studied. The results indicated that decomposition of HA during plasma spraying was reduced significantly with the addition of zirconia. The higher the zirconia content, the lower the amount of calcium oxide, tricalcium phosphate, and tetracalcium phosphate formed in the coatings. In addition, there was a trace of calcium zirconate formed when less than 30 wt% zirconia was present. A solid solution of HA mixed with YSZ formed during plasma spraying; however, the amount of unmelted particles increased as the zirconia increased. The mechanical properties of the HA/YSZ composite coatings, such as bond strength, elastic modulus, and fracture toughness, increased significantly as the contents of zirconia increased.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Khor K. A. · 1994 · 147
2. Erick L. · 1989 · 337
3. 10.1007/BF0070168710.1007/BF00701687 ↗
4. 10.1023/A:101856612450710.1023/A:1018566124507 ↗
5. 10.1016/0142-9612(95)00356-810.1016/0142-9612(95)00356-8 ↗
6. 10.1007/BF0059576710.1007/BF00595767 ↗
7. 10.1016/0142-9612(92)90011-C10.1016/0142-9612(92)90011-C ↗
8. 10.1007/978-94-011-2336-510.1007/978-94-011-2336-5 ↗
9. 10.1016/0022-3913(87)90053-910.1016/0022-3913(87)90053-9 ↗
10. 10.1002/jbm.82021120310.1002/jbm.820211203 ↗
11. J. F.KayandT. C.May “Stable HA Coatings for Non‐Precision implant Placements”; pp.302 Proceedings of Fourth World Biomaterials Congress. Berlin Germany April 2428 1992.
12. 10.1002/jbm.82025080510.1002/jbm.820250805 ↗
13. Hydroxyapatite‐Coated Titanium for Orthopacdic Implant Application10.1097/00003086-198807000-00030 ↗
14. 10.1002/jbm.82025100210.1002/jbm.820251002 ↗
15. Ducheyne P. · 1990 · 123
16. 10.1023/A:101858352232210.1023/A:1018583522322 ↗
17. 10.1023/A:101853560639310.1023/A:1018535606393 ↗
18. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
19. 10.1111/j.1151-2916.1981.tb10320.x10.1111/j.1151-2916.1981.tb10320.x ↗
20. 10.1007/BF0264742110.1007/BF02647421 ↗
21. Hydroxyapatite Ceramics with Tetragonal Zirconia Particle Dispersion Prepared by HIP Post‐Sintering.
22. Mechanical Properties and Existing Phases of Composite Ceramics Obtained by Sintering of a Mixture of Hydroxyapatite and Zirconia
23. 10.1007/BF0054052610.1007/BF00540526 ↗