Some Practical Aspects of Digital Image Correlation Technique to Evaluate Anisotropy Coefficient and Its Comparison with Traditional Method
Source abstract
Abstract
Abstract Digital Image Correlation (DIC) is a robust method that is used to evaluate full-field displacements. In this technique, images taken from the specimen are compared before and after deformation; this method provides an accurate displacement field as well as strain values. The objective of the present work is to examine the DIC method using the traditional method of calculating the plastic anisotropy coefficients. In this research, the DIC method has been applied on one side of the specimen, and the conventional circle grid analysis technique is performed on the other side. Results showed that the fully automated 2-D DIC method in MATLAB (MathWorks, Natick, MA) was verified and that it could replace the traditional technique of circle grid analysis, which is time consuming and incurs a lot of human errors.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Optical measurement and interference techniques · Advanced X-ray Imaging Techniques · Image Processing Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Iran University of Science and Technology 1 , Narmak, Tehran 16844 ,
School of Mechanical Engineering, Iran University of Science and Technology 2 , Narmak, Tehran 16844 ,
References (32)
Show source-provided references
1. Mechanical Anisotropy of Nano/Ultra-Fine Grained Aluminium Tube Processed by Parallel-Tubular-Channel Angular Pressing10.1080/02670836.2017.1368169 ↗
2. Application of Digital Image Correlation to the Study of Planar Anisotropy of Sheet Metals at Large Strains10.1007/s11012-008-9123-9 ↗
3. Forming Limit Diagram of Aluminum-Copper Two-Layer Sheets: Numerical Simulations and Experimental Verifications10.1007/s00170-016-9585-1 ↗
4. Strain Measurement and Determining Coefficient of Plastic Anisotropy Using Digital Image Correlation (DIC)10.1051/meca/2016060 ↗
5. Analysis of Major Strains and Minor Strains in Sheet Metal Forming
6. 2014 · 344
7. An Experimental, Analytical, and Numerical Investigation of Hydraulic Bulge Test in Two-Layer Al–Cu Sheets10.1115/1.4034717 ↗
8. Evaluation of the Microstructure and Mechanical Properties of the Ultrafine Grained Thin-Walled Tubes Processed by Severe Plastic Deformation10.1007/s12540-015-5261-5 ↗
9. An Evaluation of Digital Image Correlation Criteria for Strain Mapping Applications10.1111/j.1475-1305.2005.00227.x ↗
10. Determination of Displacements Using an Improved Digital Correlation Method10.1016/0262-8856(83)90064-1 ↗
11. 2009 · 332
12. Error Assessment for Strain Mapping by Digital Image Correlation10.1111/j.1747-1567.1998.tb02332.x ↗
13. Analysis of Strain Localization During Tensile Tests by Digital Image Correlation10.1007/BF02323101 ↗
14. Use of Digital Image Correlation for the Evaluation of Flexural Fatigue Behavior of Asphalt Beams with Geosynthetic Interlayers10.3141/2631-06 ↗
15. Influence of Geosynthetic-Interlayers on the Performance of Asphalt Overlays on Pre-Cracked Pavements10.1016/j.geotexmem.2017.01.010 ↗
16. Evaluation of Cracking Resistance Potential of Geosynthetic Reinforced Asphalt Overlays Using Direct Tensile Test10.1016/j.conbuildmat.2017.11.158 ↗
17. Repeatability of Digital Image Correlation for Measurement of Surface Strains in Composite Long Bones10.1016/j.jbiomech.2013.05.021 ↗
18. Simultaneous in-and-out-of-Plane Displacement Measurements Using Fringe Projection and Digital Image Correlation10.1016/j.optlaseng.2013.07.025 ↗
19. Parameter Choice for Optimized Digital Image Correlation10.1016/j.optlaseng.2008.10.015 ↗
20. Mechanical Properties Identification of Sheet Metals by 2D-Digital Image Correlation Method10.1016/j.proeng.2017.04.108 ↗
21. Mixed-Mode Fracture of Ductile Thin-Sheet Materials under Combined in-Plane and out-of-Plane Loading10.1007/s10704-007-9101-6 ↗
22. Eberl, C., “Digital Image Correlation and Tracking,” MathWorks, 2010, http://www.mathworks.com:80/matlabcentral/fileexchange/12413-digital-image-correlation-and-tracking (accessed 26 May 2010).
23. Measurement of r-Values of High Strength Steels Using Digital Image Correlation10.4271/2011-01-0234 ↗
24. Two-Dimensional Digital Image Correlation for in-Plane Displacement and Strain Measurement: A Review10.1088/0957-0233/20/6/062001 ↗
25. Measurement of Directional Anisotropy Coefficients for AA7020-T6 Tubes and Prediction of Forming Limit Curve10.1007/s00170-018-1645-2 ↗
26. Effects of Normal and Through-Thickness Shear Stresses on the Forming Limit Curves of AA3104-H19 Using Advanced Yield Criteria10.1016/j.ijmecsci.2018.01.009 ↗
27. ASTM E8/E8M-16a · 2016
28. Quality Assessment of Speckle Patterns for Digital Image Correlation10.1016/j.optlaseng.2005.10.004 ↗
29. Development and First Assessment of a DIC System for a Micro-Tensile Tester Used for Solder Characterization10.1007/s40799-017-0175-4 ↗
30. Characterization of the Strain-Life Fatigue Properties of Thin Sheet Metal Using an Optical Extensometer10.1016/j.optlaseng.2014.03.011 ↗
31. Application of Digital Image Correlation to the Investigation of Crack Closure Following Overloads10.1016/j.proeng.2010.03.112 ↗
32. Digital Image Correlation10.1016/S1369-7021(10)70235-2 ↗