journal article·2025-11-02Open access

Reaction and microstructure of metakaolin-based geopolymer

Haruki Nakashima, Kiyofumi Kurumisawa

Abstract

The reaction mechanism of geopolymers remains unclear, yet it significantly influences their early-age properties such as strength and microstructure. In this study, the heat of reaction and compressive strength were measured for geopolymers with varying SiO2/Al2O3 and H2O/Al2O3 ratios. Results showed that increasing both ratios decreased the degree of reaction and the peak heat flow, likely due to reduced alkalinity and hindered dehydration during polymerization. A certain degree of reaction is essential for strength development, while unreacted metakaolin can act as a filler, contributing positively to strength. An increased H2O/Al2O3 ratio initially enhances workability and strength, but excessive water leads to higher porosity and reduced strength. Based on the balance between reactivity and porosity, the optimal mix proportions were found to be SiO2/Al2O3 = 3.5–3.75 and H2O/Al2O3 = 11 for K-based geopolymers, and SiO2/Al2O3 = 3.75 with H2O/Al2O3 = 11–12 for Na-based geopolymers.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Sustainable Resources Engineering, Graduate School of Engineering, Hokkaido University

Division of Sustainable Resources Engineering, Faculty of Engineering, Hokkaido University

Funding

The Taisei Foundation · JSPS KAKENHI · Japan Synchrotron Radiation Research Institute · Japan Society for the Promotion of Science

References (50)

Show source-provided references
1. 10.1016/j.jes.2020.11.02010.1016/j.jes.2020.11.020 ↗
2. 10.1016/j.conbuildmat.2019.11745510.1016/j.conbuildmat.2019.117455 ↗
3. 10.1016/j.jclepro.2023.13746610.1016/j.jclepro.2023.137466 ↗
4. 10.1007/BF0190444610.1007/BF01904446 ↗
5. 10.1007/s40996-021-00797-310.1007/s40996-021-00797-3 ↗
6. Harada K. Geopolymer, a new material that is friendly to nature. Land Improvement. 2016;293:67–69.
7. 10.1016/j.clay.2009.08.01510.1016/j.clay.2009.08.015 ↗
8. 10.1016/j.jnoncrysol.2017.03.01110.1016/j.jnoncrysol.2017.03.011 ↗
9. Japan Concrete Inst. Report of the Research Committee on the Application of Geopolymer Technology to the Construction Field. 2017.
10. 10.1016/j.susmat.2024.e0088210.1016/j.susmat.2024.e00882 ↗
11. 10.1016/j.conbuildmat.2021.12599310.1016/j.conbuildmat.2021.125993 ↗
12. 10.1016/j.jnucmat.2022.15357010.1016/j.jnucmat.2022.153570 ↗
13. 10.4236/msce.2014.2700210.4236/msce.2014.27002 ↗
14. 10.1016/j.cemconres.2022.10699310.1016/j.cemconres.2022.106993 ↗
15. 10.1016/j.cemconcomp.2011.07.00710.1016/j.cemconcomp.2011.07.007 ↗
16. 10.3151/coj.56.5_40910.3151/coj.56.5_409 ↗
17. 10.1016/j.cemconcomp.2023.10493210.1016/j.cemconcomp.2023.104932 ↗
18. 10.1016/j.jnoncrysol.2014.12.02110.1016/j.jnoncrysol.2014.12.021 ↗
19. 10.1016/j.cemconres.2017.10.00410.1016/j.cemconres.2017.10.004 ↗
20. 10.1016/j.jobe.2020.10130710.1016/j.jobe.2020.101307 ↗
21. 10.1016/j.conbuildmat.2018.12.11410.1016/j.conbuildmat.2018.12.114 ↗
22. 10.1007/s10853-011-6085-410.1007/s10853-011-6085-4 ↗
23. 10.1016/j.conbuildmat.2009.12.02310.1016/j.conbuildmat.2009.12.023 ↗
24. 10.1016/j.clay.2008.09.00310.1016/j.clay.2008.09.003 ↗
25. 10.3390/ma909076710.3390/ma9090767 ↗
26. 10.1016/j.colsurfa.2006.05.04410.1016/j.colsurfa.2006.05.044 ↗
27. 10.1016/j.conbuildmat.2019.05.02210.1016/j.conbuildmat.2019.05.022 ↗
28. 10.1617/s11527-021-01758-y10.1617/s11527-021-01758-y ↗
29. Oliveira MF, Lameiras FS. Mix design formulation range for metakaolin-based geopolymer synthesis. Metallurgy and materials REM. Int Eng J. 2022;75(3):225–234.
30. 10.1088/0953-8984/19/50/50610110.1088/0953-8984/19/50/506101 ↗
31. 10.1063/1.492337110.1063/1.4923371 ↗
32. 10.1016/j.conbuildmat.2023.13476010.1016/j.conbuildmat.2023.134760 ↗
33. 10.1016/j.cemconcomp.2017.01.01410.1016/j.cemconcomp.2017.01.014 ↗
34. 10.1016/j.colsurfa.2005.01.01610.1016/j.colsurfa.2005.01.016 ↗
35. 10.1016/j.conbuildmat.2021.12591010.1016/j.conbuildmat.2021.125910 ↗
36. 10.1016/S0008-8846(00)00231-310.1016/S0008-8846(00)00231-3 ↗
37. 10.1007/s10973-017-6789-z10.1007/s10973-017-6789-z ↗
38. 10.1023/A:101017220429710.1023/A:1010172204297 ↗
39. 10.1016/j.colsurfa.2005.06.06010.1016/j.colsurfa.2005.06.060 ↗
40. 10.1111/j.1551-2916.2012.05184.x10.1111/j.1551-2916.2012.05184.x ↗
41. 10.1107/S160057671601461810.1107/S1600576716014618 ↗
42. 10.1016/j.conbuildmat.2018.12.20110.1016/j.conbuildmat.2018.12.201 ↗
43. 10.1016/j.clay.2012.09.00910.1016/j.clay.2012.09.009 ↗
44. 10.1111/j.1551-2916.2010.03906.x10.1111/j.1551-2916.2010.03906.x ↗
45. 10.1016/j.powtec.2013.09.02210.1016/j.powtec.2013.09.022 ↗
46. 10.1111/j.1551-2916.2008.02922.x10.1111/j.1551-2916.2008.02922.x ↗
47. 10.1107/S002188981102107810.1107/S0021889811021078 ↗
48. 10.3390/ma1313297310.3390/ma13132973 ↗
49. 10.3390/su1406314110.3390/su14063141 ↗
50. 10.1061/(ASCE)MT.1943-5533.000448510.1061/(ASCE)MT.1943-5533.0004485 ↗