Effects of different kinds of recycled fine aggregate on properties of rendering mortar
Source abstract
Abstract
This study investigated the properties of rendering cement mortars prepared with three different types of recycled fine aggregates (RAs). Type I was a fine RA obtained from a recycling plant in which mixed demolition wastes were suitably treated by mechanical crushing, sieving, and sorting operations. Types II and III were fine RAs obtained from crushing two different size fractions (50–150 and 150–250 mm) of construction and demolition waste rubbles collected from a sorting facility. Two series of rendering mortar mixes were prepared with a constant water/cement and a constant aggregate/cement ratios of 0.55 and 3, respectively. River sand and natural crushed rock fines were originally used as aggregates in the two series separately, and they were consistently replaced by 25, 50, 75, and 100% by each of the three types of recycled aggregates. The experimental results showed that mechanical properties such as compressive strength, flexural strength, and modulus of elasticity of the mortars prepared with the RA were lower than the mortars made with the natural aggregates. Nevertheless, the bond strength at the interface between the mortar and masonry bricks determined by the Triplet test was found to be higher for the mortars prepared with the RAs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Civil Engineering and Development Department (CEDD), HKSAR. Statistic on generation of C&D material; 2009.
2. Chini AR · J. Transp. Eng. · 2001 · 127 · 48610.1061/(ASCE)0733-947X(2001)127:6(486) ↗
3. Park T · J. Transp. Eng. · 2003 · 129 · 55810.1061/(ASCE)0733-947X(2003)129:5(558) ↗
4. Nataatmadja A · J. Transp. Eng. · 2001 · 127 · 45010.1061/(ASCE)0733-947X(2001)127:5(450) ↗
5. Molenaar AAA · Transp. Res. Rec. · 2002 · 1787 · 7310.3141/1787-08 ↗
6. Hansen TC · ACI J. · 1986 · 83 · 983
7. Hansen TC. Recycling of demolished concrete and masonry: RILEM TC 37-DRC-demolition and reuse of concrete. London: E and FN Spon; 1992.10.1201/9781482267075 ↗
8. Dhir RK · 1998
9. Khatib JM · Cem. Concr. Res. · 2005 · 35 · 76310.1016/j.cemconres.2004.06.017 ↗
10. Kou, Shi-cong, Poon, Chi-sun. Enhancing durability properties of concrete Prepared with coarse recycled aggregate, Construction and Building Materials, 2012 Oct;35:69–76.10.1016/j.conbuildmat.2012.02.032 ↗
11. Evangelista L · Cement Concr. Compos. · 2007 · 29 · 39710.1016/j.cemconcomp.2006.12.004 ↗
12. Kou SC · Cement Concr. Compos. · 2009 · 31 · 62210.1016/j.cemconcomp.2009.06.005 ↗
13. Poon CS · Constr. Build. Mater. · 2002 · 16 · 28110.1016/S0950-0618(02)00019-3 ↗
14. Poon CS · Constr. Build. Mater. · 2006 · 20 · 57810.1016/j.conbuildmat.2005.01.045 ↗
15. Corinaldesi V · Waste Manage. (Oxford) · 2002 · 22 · 89310.1016/S0956-053X(02)00087-9 ↗
16. Moriconi G · Mater. Struct. · 2003 · 36 · 70210.1617/13872 ↗
17. Corinaldesi V · Constr. Build. Mater. · 2009 · 23 · 28910.1016/j.conbuildmat.2007.12.006 ↗
18. Corinaldesi V · Cement Concr. Compos. · 2009 · 31 · 50510.1016/j.cemconcomp.2009.05.003 ↗
19. Hwang EH, Young SK, Jeon JK. Effect of polymer cement modifiers on mechanical and physical properties of polymer-modified mortar using recycled waste concrete fine aggregate. J. Ind. Eng. Chem., Vol. 13, No. 3, (2007) 387–394.
20. Mesbah HA · Constr. Build. Mater. · 1999 · 13 · 43910.1016/S0950-0618(99)00047-1 ↗
21. BS EN 1015-9. Part 9: Determination of workable life and correction time of fresh mortar; 1999.
22. ISO 15148. (E) Hygrothermal performance of building materials and products-determination of water absorption coefficient by partial immersion; 2002.
23. Cabrera JG · Mag. Concr. Res. · 1988 · 40 · 17710.1680/macr.1988.40.144.177 ↗
24. Gaafar BA. The effect of environmental curing conditions on the gas and water permeability of concrete [PhD Thesis]. Leeds: University of Leeds; 1995.
25. BS EN 1015–11. Part 11: Determination of flexural and compressive strength of harden mortar; 1999.
26. Ente nazionale di unificazione. UNI EN 1015–3. Methods of test for mortar for masonry – Part 3: determination of consistence of fresh mortar (by flow table); 2004.
27. McGinley WM. IRA and the flexural bond strength of clay brick masonry. Masonry: components to assemblages, ASTM special technical publication no 1063, Philadelphia: ASTM; 1990. p. 217–234.10.1520/STP24988S ↗
28. Robinson GC · Am. Ceram. Soc. Bull. · 1996 · 75 · 81
29. Brocken HJP · Mater. Struct. · 1998 · 31 · 4910.1007/BF02486414 ↗
30. Poon CS · Cem. Concr. Compos. · 2008 · 30 · 28310.1016/j.cemconcomp.2007.10.005 ↗