journal article·2026-03-04

Thermic enhancement of pozzolanic reactivity of ground coal-based bottom ash as cement substitute

Hyunuk Kang, Ahyeon Lim, Jingwei Yang, Chul-Woo Chung, Juhyuk Moon

Publisher page

Abstract

This study investigates the effects of curing temperatures (20 °C and 60 °C) on the hydration behavior and mechanical performance of bottom ash (BA) incorporated ordinary Portland cement (BAOPC) composites. At 20 °C, the ground BA showed low reactivity, exhibiting minimal participation in hydration reactions and resulting in limited pore refinement and increased large-sized pore formation. These factors contributed to a reduction in compressive strength. Meanwhile, curing at 60 °C significantly accelerated hydration, with BA actively engaging in hydration reactions to form substantial amounts of calcium silicate hydrate and monocarboaluminate phases. This process refined the pore structure, leading to a marked improvement in compressive strength. The findings highlight the critical role of elevated curing temperature in optimizing the pozzolanic reactivity of BA, demonstrating its potential to contribute to sustainable construction by using BAOPC.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, University of California

Department of Civil and Environmental Engineering, Seoul National University

Division of Architectural and Fire Protection Engineering, Pukyong National University

Institute of Construction and Environmental Engineering

Funding

Korean government

References (85)

Show source-provided references
1. 10.1016/j.cej.2021.13394610.1016/j.cej.2021.133946 ↗
2. 10.1016/j.jobe.2024.11052810.1016/j.jobe.2024.110528 ↗
3. 10.1016/B978-0-08-100773-0.00014-910.1016/B978-0-08-100773-0.00014-9 ↗
4. 10.1016/j.jclepro.2012.10.04910.1016/j.jclepro.2012.10.049 ↗
5. 10.3390/su1606225110.3390/su16062251 ↗
6. 10.1016/j.jcou.2024.10275710.1016/j.jcou.2024.102757 ↗
7. 10.1016/j.jobe.2023.10731110.1016/j.jobe.2023.107311 ↗
8. 10.1016/j.conbuildmat.2024.13821710.1016/j.conbuildmat.2024.138217 ↗
9. 10.1016/j.jobe.2024.11035410.1016/j.jobe.2024.110354 ↗
10. 10.1016/j.jobe.2024.10849510.1016/j.jobe.2024.108495 ↗
11. 10.1016/j.cemconcomp.2024.10553210.1016/j.cemconcomp.2024.105532 ↗
12. Velumani M, et al. Durability evaluation of cactus-infused M25 grade concrete as a bio-admixture. Periodica Polytechnica Civil Engineering. 2023;67(4):1066–1079.
13. 10.1007/s11270-023-06143-910.1007/s11270-023-06143-9 ↗
14. 10.1016/j.cemconcomp.2023.10506810.1016/j.cemconcomp.2023.105068 ↗
15. 10.1016/j.conbuildmat.2025.14350210.1016/j.conbuildmat.2025.143502 ↗
16. 10.1016/j.prostr.2025.07.07010.1016/j.prostr.2025.07.070 ↗
17. 10.1016/j.prostr.2025.07.02910.1016/j.prostr.2025.07.029 ↗
18. 10.3311/PPci.3872710.3311/PPci.38727 ↗
19. 10.1016/j.conbuildmat.2019.01.20810.1016/j.conbuildmat.2019.01.208 ↗
20. 10.1016/S0008-8846(00)00213-110.1016/S0008-8846(00)00213-1 ↗
21. 10.1016/j.conbuildmat.2022.12701210.1016/j.conbuildmat.2022.127012 ↗
22. 10.1596/978-1-4648-1329-010.1596/978-1-4648-1329-0 ↗
23. 10.1016/j.jhazmat.2021.12582810.1016/j.jhazmat.2021.125828 ↗
24. 10.1002/maco.20160888110.1002/maco.201608881 ↗
25. 10.1016/j.conbuildmat.2023.13452310.1016/j.conbuildmat.2023.134523 ↗
26. 10.1016/j.conbuildmat.2023.13368810.1016/j.conbuildmat.2023.133688 ↗
27. 10.1016/S0008-8846(00)00214-310.1016/S0008-8846(00)00214-3 ↗
28. 10.1016/j.conbuildmat.2021.12387410.1016/j.conbuildmat.2021.123874 ↗
29. 10.1016/j.wasman.2008.06.02310.1016/j.wasman.2008.06.023 ↗
30. 10.1016/j.conbuildmat.2015.08.06810.1016/j.conbuildmat.2015.08.068 ↗
31. 10.1080/19392699.2024.240760410.1080/19392699.2024.2407604 ↗
32. Standardization I. Cement, test methods, determination of strength. Iso 679. Geneva: ISO; 2009.
33. 10.3390/ma1207107210.3390/ma12071072 ↗
34. 10.1016/j.cemconcomp.2015.11.00810.1016/j.cemconcomp.2015.11.008 ↗
35. 10.1016/j.cemconcomp.2020.10368810.1016/j.cemconcomp.2020.103688 ↗
36. 10.1107/S002188989400421810.1107/S0021889894004218 ↗
37. 10.1107/S002188989600819910.1107/S0021889896008199 ↗
38. 10.1107/S160057671901395510.1107/S1600576719013955 ↗
39. 10.1016/j.cemconres.2014.06.01110.1016/j.cemconres.2014.06.011 ↗
40. 10.1016/j.cemconres.2013.06.00110.1016/j.cemconres.2013.06.001 ↗
41. 10.1016/j.cemconcomp.2024.10551610.1016/j.cemconcomp.2024.105516 ↗
42. 10.1109/TIP.2010.204952810.1109/TIP.2010.2049528 ↗
43. 10.1016/j.cemconcomp.2021.10429410.1016/j.cemconcomp.2021.104294 ↗
44. 10.1038/s41598-024-81333-x10.1038/s41598-024-81333-x ↗
45. 10.1016/j.xcrm.2025.10218610.1016/j.xcrm.2025.102186 ↗
46. 10.1007/s11440-024-02234-x10.1007/s11440-024-02234-x ↗
47. 10.1016/j.conbuildmat.2010.11.04310.1016/j.conbuildmat.2010.11.043 ↗
48. 10.1016/S0008-8846(99)00098-810.1016/S0008-8846(99)00098-8 ↗
49. 10.1016/j.matlet.2023.13560010.1016/j.matlet.2023.135600 ↗
50. 10.1016/j.cemconres.2011.10.00510.1016/j.cemconres.2011.10.005 ↗
51. 10.1016/j.cemconres.2011.03.00410.1016/j.cemconres.2011.03.004 ↗
52. 10.1016/j.cemconres.2010.09.01410.1016/j.cemconres.2010.09.014 ↗
53. 10.1016/j.cemconres.2020.10604110.1016/j.cemconres.2020.106041 ↗
54. 10.1016/j.jobe.2024.10921410.1016/j.jobe.2024.109214 ↗
55. 10.1016/j.cemconres.2014.09.00210.1016/j.cemconres.2014.09.002 ↗
56. 10.1016/j.cemconres.2022.10699910.1016/j.cemconres.2022.106999 ↗
57. 10.1016/j.conbuildmat.2022.12655410.1016/j.conbuildmat.2022.126554 ↗
58. 10.1016/j.cemconres.2021.10649910.1016/j.cemconres.2021.106499 ↗
59. 10.1016/j.conbuildmat.2022.12707010.1016/j.conbuildmat.2022.127070 ↗
60. 10.1016/j.cemconres.2014.10.00110.1016/j.cemconres.2014.10.001 ↗
61. 10.1680/cc.2592910.1680/cc.25929 ↗
62. Scrivener K, Snellings R, Lothenbach B. A practical guide to microstructural analysis of cementitious materials. Vol. 540. Boca Raton, FL: CRC Press; 2016.
63. 10.1016/j.cemconcomp.2015.11.00310.1016/j.cemconcomp.2015.11.003 ↗
64. 10.1016/j.cemconres.2010.11.01710.1016/j.cemconres.2010.11.017 ↗
65. Granger S, Loukili A, Pijaudier-Cabot G, et al. Mechanical characterization of the self-healing effect of cracks in ultra high performance concrete (UHPC). In: Proceedings Third International Conference on Construction Materials, Performance, Innovations and Structural Implications, ConMat; 2005.
66. 10.1016/j.conbuildmat.2008.07.02610.1016/j.conbuildmat.2008.07.026 ↗
67. 10.1155/2019/920457010.1155/2019/9204570 ↗
68. 10.1016/j.cemconcomp.2023.10532610.1016/j.cemconcomp.2023.105326 ↗
69. 10.1016/j.cemconres.2013.07.00610.1016/j.cemconres.2013.07.006 ↗
70. 10.1016/j.cemconcomp.2024.10578910.1016/j.cemconcomp.2024.105789 ↗
71. 10.1016/j.cemconres.2022.10690210.1016/j.cemconres.2022.106902 ↗
72. 10.1111/jace.1935010.1111/jace.19350 ↗
73. 10.1016/j.cemconres.2015.02.01110.1016/j.cemconres.2015.02.011 ↗
74. Mehta PK, Monteiro P. Concrete: microstructure, properties, and materials. New York: McGraw-Hill Education; 2006.
75. 10.1016/j.cemconcomp.2016.02.00810.1016/j.cemconcomp.2016.02.008 ↗
76. Zhang Y, et al. Pore structure of blended cement paste by means of pressurization–depressurization cycling mercury intrusion porosimetry. In: Proceedings of the 1st Ageing of Materials & Structures Conference, Delft, The Netherlands; 2014.
77. 10.1016/j.jclepro.2017.08.09710.1016/j.jclepro.2017.08.097 ↗
78. 10.1016/j.powtec.2019.11.00210.1016/j.powtec.2019.11.002 ↗
79. 10.1016/j.conbuildmat.2019.11727610.1016/j.conbuildmat.2019.117276 ↗
80. 10.3390/su1504379510.3390/su15043795 ↗
81. 10.1016/j.cemconres.2013.06.00810.1016/j.cemconres.2013.06.008 ↗
82. 10.1016/j.jobe.2023.10619610.1016/j.jobe.2023.106196 ↗
83. 10.1039/C7TA06104H10.1039/C7TA06104H ↗
84. 10.1007/BF0248041410.1007/BF02480414 ↗
85. 10.1016/j.conbuildmat.2022.12650410.1016/j.conbuildmat.2022.126504 ↗