Valorization of bulk molding compound (BMC) waste in alkali-activated materials (AAMs) for paving applications: technical validation and life cycle assessment
Source abstract
Abstract
The recycling of glass-fiber-reinforced thermosets represents a critical challenge due to their cross-linked polymeric matrix and high inorganic fraction, which limit the applicability of conventional end-of-life strategies. Thus, our work investigates an alternative recycling pathway based on the incorporation of milled BMC into Alkali-Activated Materials (AAMs), with the dual objective of exploiting BMC both as a partial substitute for fine aggregates and as an additional source of reactive aluminosilicates. Life cycle assessment (LCA) further highlights the environmental benefits of our strategy, showing a 76% reduction in single-score impacts compared to incineration and a 24% lower footprint of AAM-BMC paving blocks relative to conventional concrete alternatives. Beyond the specific case of paving applications, our study demonstrates a replicable framework for the valorization of complex thermoset composite wastes in BMC-based AAMs, contributing to the broader circular economy strategies in the construction sector in alignment with sustainable development goals.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dipartimento di Ingegneria Civile e Meccanica, Università degli Studi di Cassino e del Lazio Meridionale Via G. Di Blasio
Dipartimento di Chimica, Materiali e Ingegneria Chimica ‘G.Natta’, Politecnico di Milano
References (74)
Show source-provided references
1. 10.1080/00222348.2020.184440910.1080/00222348.2020.1844409 ↗
2. 10.1002/pc.2640210.1002/pc.26402 ↗
3. 10.1016/j.polymdegradstab.2005.05.00310.1016/j.polymdegradstab.2005.05.003 ↗
4. Witten E Mathes V. The European market for fibre-reinforced plastics and composites 2022 market developments trends challenges and outlook. 2023 [accessed 2023 September 29].
5. 10.2320/matertrans.M201632210.2320/matertrans.M2016322 ↗
6. Spasojevic PM. Thermal and rheological properties of unsaturated polyester resins-based composites. In Unsaturated polyester resins: fundamentals, design, fabrication, and applications. Amsterdam, Netherlands: Elseviers; 2019. p. 367–406.
7. 10.2320/matertrans.M201407010.2320/matertrans.M2014070 ↗
8. 10.3390/ma1503114510.3390/ma15031145 ↗
9. 10.1177/0731684421105520810.1177/07316844211055208 ↗
10. 10.1177/089270570504500610.1177/0892705705045006 ↗
11. 10.1016/S0165-2370(02)00102-X10.1016/S0165-2370(02)00102-X ↗
12. 10.1016/j.compositesa.2005.05.03010.1016/j.compositesa.2005.05.030 ↗
13. ABB. 2023 private communication.
14. Souder J Kennedy E Xu C et al. The plastic product mass flow model 2.0 modelling plastic product flows and recycling in the EU. 2024.
15. 10.1016/j.wasman.2021.09.02110.1016/j.wasman.2021.09.021 ↗
16. 10.1016/j.jclepro.2014.06.02310.1016/j.jclepro.2014.06.023 ↗
17. 10.1016/j.jclepro.2016.01.07010.1016/j.jclepro.2016.01.070 ↗
18. 10.1016/j.compositesa.2009.02.00210.1016/j.compositesa.2009.02.002 ↗
19. 10.1016/j.polymdegradstab.2023.11044710.1016/j.polymdegradstab.2023.110447 ↗
20. Shibata K Nakagawa M. CFRP recycling technology using depolymerization under ordinary pressure. 2014.
21. 10.1016/j.wasman.2018.03.02610.1016/j.wasman.2018.03.026 ↗
22. European Union. DIRECTIVE 2008/98/EC of the EUROPEAN PARLIAMENT AND OF THE COUNCIL of 19 November 2008 on waste and repealing certain directives (text with EEA relevance). European Parliament; 2008;OJ L 312:3–30 Nov 22 2008.
23. 10.1016/S0016-2361(99)00220-310.1016/S0016-2361(99)00220-3 ↗
24. 10.1016/j.compositesa.2009.05.02010.1016/j.compositesa.2009.05.020 ↗
25. 10.1016/j.compositesa.2013.02.00910.1016/j.compositesa.2013.02.009 ↗
26. Harth T Sims B Sullivan JL et al. Shaping tomorrow’s vehicles: SMC automotive alliance steps up to recycling challenge author(s). 1995.10.4271/950834 ↗
27. EuPC EuCIA and ECRC. Glass fibre reinforced thermosets: recyclable and compliant with the EU legislation. 2011.
28. 10.1016/j.istruc.2023.05.01810.1016/j.istruc.2023.05.018 ↗
29. 10.1016/j.jclepro.2020.12332110.1016/j.jclepro.2020.123321 ↗
30. 10.3390/jcs501002810.3390/jcs5010028 ↗
31. 10.1016/j.cscm.2019.e0026810.1016/j.cscm.2019.e00268 ↗
32. 10.1016/j.jclepro.2008.12.00410.1016/j.jclepro.2008.12.004 ↗
33. 10.1016/j.conbuildmat.2009.10.01710.1016/j.conbuildmat.2009.10.017 ↗
34. 10.1016/j.conbuildmat.2013.06.04310.1016/j.conbuildmat.2013.06.043 ↗
35. 10.1016/j.conbuildmat.2013.06.08610.1016/j.conbuildmat.2013.06.086 ↗
36. 10.1016/j.cemconcomp.2009.11.00510.1016/j.cemconcomp.2009.11.005 ↗
37. 10.1016/j.jclepro.2011.05.01810.1016/j.jclepro.2011.05.018 ↗
38. 10.1016/j.jclepro.2018.11.08010.1016/j.jclepro.2018.11.080 ↗
39. 10.1016/j.ceramint.2022.01.29310.1016/j.ceramint.2022.01.293 ↗
40. 10.1016/j.jobe.2024.10946510.1016/j.jobe.2024.109465 ↗
41. 10.1007/s41062-024-01423-710.1007/s41062-024-01423-7 ↗
42. 10.1016/j.cscm.2023.e0283910.1016/j.cscm.2023.e02839 ↗
43. 10.1016/j.cemconcomp.2015.03.00410.1016/j.cemconcomp.2015.03.004 ↗
44. 10.1016/j.conbuildmat.2023.13428110.1016/j.conbuildmat.2023.134281 ↗
45. 10.3390/ma1522817110.3390/ma15228171 ↗
46. 10.3390/ma903015810.3390/ma9030158 ↗
47. 10.1016/j.conbuildmat.2015.10.08910.1016/j.conbuildmat.2015.10.089 ↗
48. 10.1016/j.cscm.2021.e0080310.1016/j.cscm.2021.e00803 ↗
49. 10.1016/j.conbuildmat.2022.12805710.1016/j.conbuildmat.2022.128057 ↗
50. 10.1016/j.eng.2019.08.01910.1016/j.eng.2019.08.019 ↗
51. 10.1016/j.conbuildmat.2015.04.03910.1016/j.conbuildmat.2015.04.039 ↗
52. 10.1016/j.cemconres.2024.10747810.1016/j.cemconres.2024.107478 ↗
53. 10.1038/s41467-022-35372-510.1038/s41467-022-35372-5 ↗
54. 10.1021/acsomega.8b0238010.1021/acsomega.8b02380 ↗
55. 10.1016/j.cemconcomp.2024.10547410.1016/j.cemconcomp.2024.105474 ↗
56. 10.1016/j.conbuildmat.2007.06.01110.1016/j.conbuildmat.2007.06.011 ↗
57. Vedalakshmi R, Sundara Raj A, Palaniswamy N. Identification of various chemical phenomena in concrete using thermal analysis. Indian J Chem Technol. 2008;15(4):388–396.
58. 10.12693/APhysPolA.131.56210.12693/APhysPolA.131.562 ↗
59. 10.1016/0021-9517(75)90014-710.1016/0021-9517(75)90014-7 ↗
60. 10.1016/B978-0-12-816129-6.00015-610.1016/B978-0-12-816129-6.00015-6 ↗
61. 10.1039/jr953000008410.1039/jr9530000084 ↗
62. 10.1007/s10973-021-10895-z10.1007/s10973-021-10895-z ↗
63. 10.1016/j.conbuildmat.2016.09.12110.1016/j.conbuildmat.2016.09.121 ↗
64. 10.1016/j.conbuildmat.2012.04.00510.1016/j.conbuildmat.2012.04.005 ↗
65. 10.1016/j.cemconres.2016.02.00810.1016/j.cemconres.2016.02.008 ↗
66. 10.1016/j.conbuildmat.2014.05.08010.1016/j.conbuildmat.2014.05.080 ↗
67. 10.1016/j.cemconres.2004.06.03110.1016/j.cemconres.2004.06.031 ↗
68. Pu XC, Gan CC, Wang SD, et al. Summary reports of research on alkali-activated slag cement and concrete. Chongqing: Chongqing Institute of Architecture and Engineering; 1988. p. 1–6.
69. 10.1016/j.conbuildmat.2013.05.10710.1016/j.conbuildmat.2013.05.107 ↗
70. 10.3390/app906119710.3390/app9061197 ↗
71. Purwanto P, Priastiwi YA. Testing of concrete paving blocks the BS EN 1338: 2003 British and European standard code. Teknik. 2008;29(2):80–84.
72. 10.1088/1742-6596/1538/1/01202510.1088/1742-6596/1538/1/012025 ↗
73. PRé Sustainability ©. SimaPro 9.5 Software. Available from: https://simapro.com/
74. 10.1007/s11367-016-1087-810.1007/s11367-016-1087-8 ↗