journal article·2025-10-03

An experimental study on geopolymer mortars based on copper slag, metakaolin and ground granulated blast furnace slag: mechanical and durability perspective

Mahsa Rezaeian, Sajjad Mirvalad, Ali Akbar Shirzadi Javid, Mohammad Hossien Ramin

Publisher page

Abstract

The mechanical, durability and microstructural properties of ground granulated blast furnace slag (GGBFS), metakaolin (MK) and copper slag (CS) geopolymer mortars were investigated. CS was used as a partial replacement of GGBFS and MK at different levels of 0%, 10%, 20%, and 30% by weight of the total binder. The outcomes revealed that to maximize the mechanical strength in MK and GGBFS-based geopolymer samples, a 10% CS as a replacement is required. The geopolymer based on MK containing 30% replacement of CS exhibited the lowest water absorption, showing a 32% reduction compared to the 100% MK geopolymer mortar. The GGBFS containing 20% CS performed the best in Rapid Chloride Migration Test. X-Ray Diffraction, Scanning Electron Microscopy and energy dispersive X-ray spectroscopy indicated that geopolymer mortars containing MK formed amorphous gel, sodium aluminum silicate hydrate (N-A-S-H), while geopolymer mortars based on GGBFS produced sodium (or calcium) silicate aluminum hydrate gel [N-(C)-A-S-H].
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil Engineering, Iran University of Science and Technology

References (74)

Show source-provided references
1. 10.1016/j.cemconcomp.2008.12.01010.1016/j.cemconcomp.2008.12.010 ↗
2. 10.15446/dyna.v90n227.10815810.15446/dyna.v90n227.108158 ↗
3. 10.4028/www.scientific.net/MSF.685.18110.4028/www.scientific.net/MSF.685.181 ↗
4. Mehta KP. Reducing the environmental impact of concrete. Concr Int. 2001;23(10):61–66.
5. 10.1016/j.rser.2017.05.07610.1016/j.rser.2017.05.076 ↗
6. 10.1016/j.jclepro.2011.03.01210.1016/j.jclepro.2011.03.012 ↗
7. 10.1016/j.conbuildmat.2014.01.08110.1016/j.conbuildmat.2014.01.081 ↗
8. 10.1016/j.cemconres.2017.02.00910.1016/j.cemconres.2017.02.009 ↗
9. 10.1179/1743676114Y.000000017710.1179/1743676114Y.0000000177 ↗
10. 10.1016/j.mineng.2011.09.00910.1016/j.mineng.2011.09.009 ↗
11. 10.2465/jmps.100.15910.2465/jmps.100.159 ↗
12. Davidovits J. . Years of successes and failures in geopolymer applications. Market trends and potential breakthroughs. In Geopolymer 2002 conference. Saint‐Quentin, France; Melbourne, Australia: Geopolymer Institute; 2002, Vol. 28, p. 29.
13. 10.15446/dyna.v87n213.8320810.15446/dyna.v87n213.83208 ↗
14. Davidovits J. October. Properties of geopolymer cements In First international conference on alkaline cements and concretes (Vol. 1, p. 131–149. 1994.
15. Li Z, Ding Z, Zhang Y. May. Development of sustainable cementitious materials. In Proceedings of international workshop on sustainable development and concrete technology. Beijing, China: Iowa State University; 2004. pp. 55–76.
16. 10.1007/BF0191219310.1007/BF01912193 ↗
17. 10.1016/j.conbuildmat.2021.12339810.1016/j.conbuildmat.2021.123398 ↗
18. 10.1177/036119811989869510.1177/0361198119898695 ↗
19. 10.1080/10298436.2019.169696710.1080/10298436.2019.1696967 ↗
20. 10.1016/j.conbuildmat.2019.07.11210.1016/j.conbuildmat.2019.07.112 ↗
21. 10.1617/s11527-008-9415-510.1617/s11527-008-9415-5 ↗
22. 10.1016/j.jclepro.2019.11967910.1016/j.jclepro.2019.119679 ↗
23. 10.1016/B978-0-08-102166-8.00022-010.1016/B978-0-08-102166-8.00022-0 ↗
24. 10.1016/j.conbuildmat.2018.09.12410.1016/j.conbuildmat.2018.09.124 ↗
25. 10.1080/13287982.2005.1146494610.1080/13287982.2005.11464946 ↗
26. Supraja V, Rao MK. Experimental study on Geo-Polymer concrete incorporating GGBS. IJECSCSE. 2012;2(2):11.
27. 10.1016/j.cemconcomp.2012.11.01010.1016/j.cemconcomp.2012.11.010 ↗
28. Jawahar JG, Lavanya D, Sashidhar C. Performance of fly ash and GGBS based geopolymer concrete in acid environment. Int J Res Sci Innovation. 2016;3(8):101–104.
29. 10.1016/S1385-8947(02)00025-610.1016/S1385-8947(02)00025-6 ↗
30. Hardjito D, Wallah S, Sumajouw D, Rangan B, editors. Brief review of development of geopolymer concrete. 8th CANMET/ACI International Conference on fly ash, silica fume, slag and natural pozzolans in concrete Las Vegas (USA); 2004.
31. Davidovits J. Chemistry of geopolymeric systems terminology. In: Proceedings of 99 international conference. eds. Joseph Davidovits R. Davidovits & C. James France; 1999.
32. 10.1016/j.proeng.2011.11.210810.1016/j.proeng.2011.11.2108 ↗
33. Van Chanh N, Trung BD, Van Tuan D. Recent research geopolymer concrete. In The 3rd ACF international conference-ACF/VCA, Vietnam; 2008, Vol. 18, p. 235–241.
34. Davidovits J. Mineral polymers and methods of making them. U.S. Patent 4 349 386; 1982.
35. 10.17485/ijst/2016/v9i2/8635910.17485/ijst/2016/v9i2/86359 ↗
36. Jawahar JG, Mounika G. Strength properties of fly ash and GGBS based geopolymer concrete. Asian J Civ Eng. 2016;17(1):127–135.
37. Yakshareddy B, Jawahar JG, Sreenivasulu C, et al. Preliminary study on geopolymer concrete using copper slag and vermiculite. Int J Res Sci Innov. 2018;5:187–190.
38. 10.3390/cryst1112150410.3390/cryst11121504 ↗
39. 10.1016/j.jclepro.2017.03.03110.1016/j.jclepro.2017.03.031 ↗
40. 10.1016/j.resconrec.2008.06.00810.1016/j.resconrec.2008.06.008 ↗
41. 10.1177/0734242X0606335010.1177/0734242X06063350 ↗
42. 10.1179/037195510X1277293565494510.1179/037195510X12772935654945 ↗
43. 10.5755/j01.ms.26.2.2144710.5755/j01.ms.26.2.21447 ↗
44. 10.1016/j.jclepro.2017.10.02910.1016/j.jclepro.2017.10.029 ↗
45. 10.1016/j.jenvman.2019.10957110.1016/j.jenvman.2019.109571 ↗
46. 10.1016/j.jhazmat.2008.02.05610.1016/j.jhazmat.2008.02.056 ↗
47. Mahendran K, Arunachelam N. Study on utilization of copper slag as fine aggregate in geopolymer concrete. Int J Appl Eng Res. 2015;10(53):336–340.
48. 10.1016/j.matlet.2010.12.04910.1016/j.matlet.2010.12.049 ↗
49. 10.1016/j.conbuildmat.2020.11802910.1016/j.conbuildmat.2020.118029 ↗
50. 10.3390/ma1507266610.3390/ma15072666 ↗
51. 10.1007/s12649-019-00666-110.1007/s12649-019-00666-1 ↗
52. 10.1016/S0008-8846(98)00045-310.1016/S0008-8846(98)00045-3 ↗
53. 10.1016/j.conbuildmat.2004.07.01710.1016/j.conbuildmat.2004.07.017 ↗
54. 10.1061/(ASCE)MT.1943-5533.000315710.1061/(ASCE)MT.1943-5533.0003157 ↗
55. 10.1016/j.conbuildmat.2020.11864110.1016/j.conbuildmat.2020.118641 ↗
56. 10.1016/j.conbuildmat.2020.12027610.1016/j.conbuildmat.2020.120276 ↗
57. 10.1080/21650373.2012.75262110.1080/21650373.2012.752621 ↗
58. 10.1007/s10853-011-6107-210.1007/s10853-011-6107-2 ↗
59. 10.1016/j.compositesb.2016.02.04310.1016/j.compositesb.2016.02.043 ↗
60. 10.1016/j.cemconcomp.2019.10339210.1016/j.cemconcomp.2019.103392 ↗
61. 10.1016/S0008-8846(96)00174-310.1016/S0008-8846(96)00174-3 ↗
62. 10.1016/j.conbuildmat.2017.07.02710.1016/j.conbuildmat.2017.07.027 ↗
63. 10.1016/j.cemconcomp.2012.04.00910.1016/j.cemconcomp.2012.04.009 ↗
64. 10.1007/s10853-011-6107-210.1007/s10853-011-6107-2 ↗
65. 10.1016/j.conbuildmat.2013.07.10610.1016/j.conbuildmat.2013.07.106 ↗
66. 10.1016/j.cscm.2023.e0198110.1016/j.cscm.2023.e01981 ↗
67. 10.1007/s42452-020-03985-410.1007/s42452-020-03985-4 ↗
68. 10.1080/19648189.2022.205030310.1080/19648189.2022.2050303 ↗
69. 10.1080/19648189.2021.187993910.1080/19648189.2021.1879939 ↗
70. 10.1016/j.jclepro.2021.12619310.1016/j.jclepro.2021.126193 ↗
71. 10.1016/j.conbuildmat.2019.04.05110.1016/j.conbuildmat.2019.04.051 ↗
72. 10.3390/ma1411293510.3390/ma14112935 ↗
73. 10.3390/min1307085710.3390/min13070857 ↗
74. 10.3390/ma1408191810.3390/ma14081918 ↗