Effects of NaHCO 3 as the activator and the in-situ carbonate seeding on the properties of high-dosage Ca(OH) 2 + slag (HCHS) cement
Source abstract
Abstract
This study investigated the effects of the addition of NaHCO3 (5, 10, and 15% molar amount of Ca(OH)2) on the setting time, compressive strength, drying shrinkage, and hydration process of high-dosage Ca(OH)2 + Slag (HCHS) cement. The results indicated that the NaHCO3 addition could significantly increase the 1-day compressive strength of HCHS cement from almost 0 to 10 MPa and decrease the drying shrinkage of HCHS cement up to 46.1% compared to it without NaHCO3. But the addition of NaHCO3 above 5% would result in accelerated setting, increased porosity, and decreased strength in the later stages. NaHCO3 played an in-situ carbonate seeding effect, forming CaCO3 crystals through the initial reaction of Ca(OH)2, and the activator that increased solution alkalinity promoted the formation of hydration products. These could contribute to the HCHS cement with high early compressive strength, good volume stability and certain porosity, suitable for further carbon capture.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering, Central South University, Changsha, Hunan, China
Funding
National Key R&D Program of China
References (55)
Show source-provided references
1. 10.5194/bg-9-1845-201210.5194/bg-9-1845-2012 ↗
2. Malhotra VM. Pozzolanic and cementitious materials. London: Taylor & Francis Press 2004.10.1201/9781482296761 ↗
3. 10.1088/1757-899X/322/4/04200310.1088/1757-899X/322/4/042003 ↗
4. 10.1080/21650373.2022.208257710.1080/21650373.2022.2082577 ↗
5. 10.1016/j.conbuildmat.2020.12217110.1016/j.conbuildmat.2020.122171 ↗
6. 10.1016/j.cemconres.2010.03.02010.1016/j.cemconres.2010.03.020 ↗
7. 10.1016/j.cemconcomp.2014.09.02410.1016/j.cemconcomp.2014.09.024 ↗
8. 10.1016/j.conbuildmat.2011.10.06310.1016/j.conbuildmat.2011.10.063 ↗
9. 10.1016/j.conbuildmat.2013.05.10710.1016/j.conbuildmat.2013.05.107 ↗
10. Makhadmeh WA, Soliman A. Effect of activator nature on property development of alkali-activated slag binders. J Sustain Cem-Based. 2020;10(4):240–256.
11. 10.1016/j.conbuildmat.2009.09.00110.1016/j.conbuildmat.2009.09.001 ↗
12. 10.1016/j.jclepro.2019.05.31310.1016/j.jclepro.2019.05.313 ↗
13. Shi C. Pozzolanic reaction and microstructure of chemical activated lime-fly ash pastes. ACI Mater J. 1998;95(5):537–545.
14. 10.1016/S0008-8846(01)00481-110.1016/S0008-8846(01)00481-1 ↗
15. Shi C. Alkali-activated cements and concretes. London: Taylor & Francis Press 2006.10.4324/9780203390672 ↗
16. 10.1016/j.cemconcomp.2015.10.00710.1016/j.cemconcomp.2015.10.007 ↗
17. 10.1016/j.conbuildmat.2020.12174810.1016/j.conbuildmat.2020.121748 ↗
18. 10.1007/s10098-016-1105-310.1007/s10098-016-1105-3 ↗
19. 10.1007/978-981-13-3296-8_910.1007/978-981-13-3296-8_9 ↗
20. 10.1016/j.cemconcomp.2021.10417910.1016/j.cemconcomp.2021.104179 ↗
21. 10.1617/s11527-014-0412-610.1617/s11527-014-0412-6 ↗
22. 10.1016/j.cemconres.2011.06.00310.1016/j.cemconres.2011.06.003 ↗
23. 10.1016/j.cemconres.2010.11.01410.1016/j.cemconres.2010.11.014 ↗
24. China National Standard GB/T1346-2011. Test method for water requirement of normal consistency, setting time and soundness of the Portland cement. Beijing: Standards Press of China, 2011.
25. China Professional Standards JC/T 603-2004. Standard test method for drying shrinkage of mortar. Beijing: China Building Material Industry Publishing House, 2004.
26. Wang YR, Cao YB, Ma YW, et al. Fresh and hardened properties of alkali-activated fly ash/slag binders: effect of fly ash source, surface area, and additives. J Sustain Cem-Based. 2022;11(4):234–249.
27. 10.1016/0008-8846(95)00126-W10.1016/0008-8846(95)00126-W ↗
28. 10.1016/j.tca.2012.07.01010.1016/j.tca.2012.07.010 ↗
29. 10.1016/j.conbuildmat.2020.11879910.1016/j.conbuildmat.2020.118799 ↗
30. 10.1016/j.cemconres.2010.11.01610.1016/j.cemconres.2010.11.016 ↗
31. 10.1016/j.cemconres.2009.10.01010.1016/j.cemconres.2009.10.010 ↗
32. 10.1016/j.cemconres.2013.09.01110.1016/j.cemconres.2013.09.011 ↗
33. 10.1016/j.conbuildmat.2021.12501510.1016/j.conbuildmat.2021.125015 ↗
34. 10.1016/j.cemconcomp.2004.02.00610.1016/j.cemconcomp.2004.02.006 ↗
35. 10.1080/21650373.2014.95555010.1080/21650373.2014.955550 ↗
36. 10.1155/2023/696123410.1155/2023/6961234 ↗
37. 10.1080/21650373.2023.225078610.1080/21650373.2023.2250786 ↗
38. 10.1155/2014/32645810.1155/2014/326458 ↗
39. 10.1016/j.conbuildmat.2015.06.01510.1016/j.conbuildmat.2015.06.015 ↗
40. Li WY, Yin JH, Wang J, et al. Principles and applications of low-field nuclear magnetic resonance in cenmentitious materials. J Chinese Ceram Soc. 2020;50(11):2992–3008.
41. 10.1016/j.jclepro.2020.12052210.1016/j.jclepro.2020.120522 ↗
42. Yang Z, Zhou C. Pore structure of water-Saturated cement mortars by low-field nuclear magnetic resonance. J Chinese Ceram Soc. 2022;50(5):1391–1400.
43. 10.1680/adcr.9.0001610.1680/adcr.9.00016 ↗
44. 10.1016/j.conbuildmat.2017.07.11210.1016/j.conbuildmat.2017.07.112 ↗
45. 10.1016/j.conbuildmat.2021.12400210.1016/j.conbuildmat.2021.124002 ↗
46. Bazant ZP. Mathematical modelling of creep and shrinkage of concrete. American: Wiley, 1988.
47. 10.1016/j.cemconres.2016.10.00310.1016/j.cemconres.2016.10.003 ↗
48. 10.1080/21650373.2013.80179910.1080/21650373.2013.801799 ↗
49. 10.1080/21650373.2019.162582710.1080/21650373.2019.1625827 ↗
50. 10.1016/j.conbuildmat.2013.03.05610.1016/j.conbuildmat.2013.03.056 ↗
51. 10.1021/acs.inorgchem.6b0245610.1021/acs.inorgchem.6b02456 ↗
52. 10.1016/j.engstruct.2004.09.01210.1016/j.engstruct.2004.09.012 ↗
53. 10.1007/BF0248690010.1007/BF02486900 ↗
54. 10.1016/j.cemconres.2019.03.00310.1016/j.cemconres.2019.03.003 ↗
55. 10.1016/j.jclepro.2020.12555810.1016/j.jclepro.2020.125558 ↗