Computer-aided and experimental study of hardness distribution in cutting tool steel body due to phase transformations during induction hardening
Source abstract
Abstract
The paper presents the results of numerical and experimental investigations of hardness distribution in specimens of a cutting tool steel body upon induction hardening in media that essentially differ in cooling properties. The heating conditions for the tool body were chosen the same as in the case of induction brazing of a hardmetal insert to a tool body with subsequent hardening. The hardness calculations for various zones of the specimen axial section agree well with the experimental data, thus demonstrating the adequacy of the numerical procedure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Induction Heating and Inverter Technology · Mechanical and Thermal Properties Analysis · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Cajner, F., Smoljan, B., and Landek, D., Computer Simulation of Induction Hardening, J. Mater. Proc. Tech., 2004, vol. 157–158, pp. 55–60.10.1016/j.jmatprotec.2004.09.017 ↗
2. Kurek, K. and Dolega, D., Modeling of Induction Hardening, Int. Sci. Colloq.: Modeling of Electromagnetic Processing, Hannover, 24–26 March, 2003, pp. 125–130.
3. Karban, P., Mach, M., Doleel, I., and Barglik, J., Continual Surface Induction Hardening of Profile Prismatic Steel Bodies, Int. Sci. Colloq.: Modelling for Material Processing, Riga, Latvia, 8–9 June, 2006, pp. 215–220.
4. Barglik, J, Arendarska, J., Dolega, D., and Smagor, A., Numerical Modeling of Induction Hardening of Steel Bodies, Int. Sci. Colloq.: Modelling for Electromagnetic Processing, Hannover, 27–29 October, 2008, pp. 111–116.
5. Palaniradja, K., Alagumurthi, N., and Soundararajan, V., Modeling of Phase Transformation in Induction Hardening, Open Mater. Sci. J., 2010, no. 4, pp. 64–73.10.2174/1874088X010040300064 ↗
6. Yuan, J., Kang, J., Rong, Y., and Sisson, Jr., Finite Element Analysis of Induction Hardening Process of Steel, in Dahotre, N.B., Caster, R.J., Hill, R.A., and Popoola, O.O. (Eds.), Heat Treating and Surface Engineering: Proc. of 22nd Heat Treating Soc. Conf. and the 2nd Int. Surface Eng. Cong., Indianapolis, Indiana, USA, 15–17 September, 2003, Indianapolis, USA: ASM International, 2003, pp. 104–111.
7. Reddy, A.V., Cai, J., Chuzhoy, L., et al., Development and Application of Induction Hardening Simulation for Processing Production Components, in Funatani K. and Totten G. E. (Eds.), Heat Treating: Including Advances in Surface Engineering: Int. Symp. in honour of Prof. Tom Bell and Prof. Jerome B. Cohen Memorial Symp. on Residual Stresses in the Heat Treatment Industry, 9–12 October, 2000: Proc. 20th conf., St. Louis, Missouri: ASM Int. Heat Treating Society, 2001, vol. 1, pp. 321–326.
8. Fasano, A., Hömberg, D., Panizzi, L., A Mathematical Model for Case Hardening of Steel, in DFG-Forschungszentrum MATHEON Mathematik für Schlüsseltechnologien, Berlin: Preprint for MATHEON, 2008.
9. Gaude-Fugarolas, D., Phase Transformations in Steel During Induction Hardening, in: Matematicheskoe modelirovanie i informatsionnye tekhnologii v svarke i rodstvennykh protsessakh. Sb. tr. mezhdunar. konf. (Proc. Int. Conf. Mathematical Modeling and Information Technologies in Welding and Related Processes), 16–20 September, 2002, Katsiveli, the Crimea, Kiev: Paton Electric Welding Institute, 2002, pp. 118–123.
10. Bokota, A. and Pekarska, V., Stress State in Weld Joints produced by laser Welding with Preheating, in Vtoraya mezhdurarodn. konf. “Matematicheskoe modelirovanie i informatsionnye tekhnologii v svarke i rodstvennykh protsessakh. Sb. tr. (Proc. Second Int. Conf. Mathematical Modeling and Information Technologies in Welding and Related Processes), 13–17 September, 2004, Katsiveli, the Crimea, Kiev: Paton Electric Welding Institute, 2004, pp. 32–37.
11. Pekarska, V., Numerical Simulation of Metal Structure in the Heat-Affected Zone in Welding of Steels of Increased Strength, Avtomaticheskaya Svarka, 2008, no. 4, pp. 9–14.
12. Makhnenko, V.I., Velikoivanenko, E.A., Makhnenko, O.V., et al., A Study of the Influence of Phase Transformations on residual Sreesses in Circular Welding of Pipes, Avtomaticheskaya Svarka, 2000, no. 5, pp. 3–8.
13. Nikitenko, N.I., A Method of Mathematical Modeling for Heat Transfer, Phase and Structural Transformations in Casting and Hardening of Complex-Shaped Bodies with Curvilinear Boundaries, Prom. Teplotekhn., 1998, vol. 20, no. 5, pp. 17–22.
14. Zhuk, Ya. O., Chervinko, O.P., Vasil’eva, L.Ya., A Refined Model for Structural Transformations in a Thin Steel Cylinder in Thermal Irradiation of Its End Face, Dop. NAN Ukrainy, 2007, no. 4, pp. 53–58.
15. Yur’ev, S.F., Udel’nye ob’emy faz v martensitnom prevrashchenii austenita (Specific Volumes of Phases in Martensitic Transformation of Austenite), Moscow: Metallurgizdat, 1950.
16. Dutka, V. A., Computer Modeling of the Formation of a Differential of mechanical Properties on the Holder Surface of Carbide-Tipped Tool Bit Through Quenching upon Induction Brazing, Sverkhtverdye Materialy, 2010, no. 1, pp. 75–85 [J. Superhard Mater., 2011, no. 1, pp. 55–66].10.3103/S1063457610010089 ↗
17. Dutka, V.A., Mathematical Modeling of Electromgnetic and Thermomechanical Fields in Hot Pressing of Ceramic Materials Using Induction Heating, Dokl. AN UkrSSR, Series A, 1991, no. 2, pp. 15–19.
18. Kasatkin, O.G. and Zaiffart, P., The Influence of Chemical and Phase Composition of Heat-Affected Zone on Its Mechanical Properties in Arc Welding of Low-Alloy Steels, Avtomaticheskaya Svarka, 1984, no. 2, pp. 5–10.
19. Zaiffart, P. and Kasatkin, O.G., Design Models for the Assessment of Mechanical Properties in Heat-Affected Zone in Welding Low-Alloy Steels, in Matematicheskoe modelirovanie i informatsionnye tekhnologii v svarke I rodstvennykh protsessakh. Sb. tr. mezhdunar. konf. (Proc. Int. Conf. Mathematical Modeling and Information Technologies in Welding and Related Processes), 16–20 September, 2002, Katsiveli, the Crimea, Kiev: Paton Electric Welding Institute, 2002, pp. 103–106.
20. Zakharov, A.V., Eismond Yu.E., Shcherbakov, L.P., et al., A Study of the Possibility of Using Na-KMTs Polymer Liquid for Quenching Rails and Rail Fastening Parts, Metallovedenie i Termicheskaya Obrabotka Metallov, 1991, no. 4, pp. 24–27.
21. Shmykov, A.A., Spravochnik termista (Heat-Treater’s Handbook), Moscow: Mashgiz, 1961.
22. Shorshorov, M.Kh. and Belov, V.V., Fazovye prevrashcheniya i izmeneniya svoistv stali pri zakalke. Atlas (Phase Transformations and Changes of Properties of Steel in Quenching. Atlas), Moscow: Nauka, 1972.
23. Sorokin, V.G., Volosnikova, A.V., Vyatkin, S.A., et al., Marochnik stalei i splavov (Database of Steels and Alloys), Moscow: Mashinostroenie, 1989.
24. Myagkov, V.D., Kratkii spravochnik konstruktora (Designer Concise Handbook), Moscow, Leningrad: Mashgiz, 1963.
25. Slukhotskii, A.E., Nemkov, V.S., Pavlov, N.A., and Bamuner, A.V., Ustanovki induktsioonogo nagreva (Induction Heating Systems), Leningrad: Energoizdat, 1981.