Effect of Diamond Powder Grain Size on the Formation of Polycrystals under High Pressure and High Temperature
Source abstract
Abstract
Abstract At a pressure of 8 GPa and a temperature of 1700°C, diamond crystals were synthesized in the Mg–Zn–B–C system, the synthesis product was chemically purified, and the resulting diamond powder was classified by grain size. The grain size distribution of mixtures of coarse- and fine-dispersed diamond powders synthesized in the Mg–Zn–B–C system was examined before and after exposure to high pressure, the influence of the initial mixture composition on the degree of comminution under high pressure was evaluated, and its relationship with the kinetics and densification level of polycrystals formed from these mixtures during subsequent high-temperature treatment was established. Raising the average particle size of the initial powder from 5 to 30 μm increases the degree of comminution by a factor of 6, which leads to powder densification during the high-temperature sintering stage at a pressure of 8 GPa and a temperature of 1800°C to a level of 99%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Boron and Carbon Nanomaterials Research · Advanced ceramic materials synthesis · High-pressure geophysics and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Shul’zhenko, A.A. and Gargin, V.G., Properties and structure of diamond polycrystals obtained at different sintering temperatures, Sverkhtverd. Matet., 1984, no. 2, pp. 26–30.
2. Fedoseev, D.V., Sokolina, G.A., and Yakovlev, E.N., Plastic deformation of diamond powders under high pressure, Dokl. Akad. Nauk SSSR, 1985, vol. 282, no. 3, pp. 601–604.
3. Britun, V.F., Oleynik, G.S., and Semenenko, N.P., Deformation process during high-pressure sintering of the diamond powders produced by catalytic synthesis, J. Mater. Sci., 1992, vol. 27, no. 16, pp. 4472–4476.10.1007/BF00541581 ↗
4. Kolomiitsev, A.I., Smirnov, V.E., and Ovchinnikov, A.A., Changes in the grain size distribution of diamond powders under high pressure, Almazy Sverkhtverd. Mater., 1980, vol. 7, pp. 4–5.
5. Shul'zhenko, A.A., Gargin, V.G., Shishkin, V.A., and Bochechka, A.A., Polikristallicheskie materialy na osnove almaza (Polycrystalline Diamond-Based Materials), Novikov, N.V., Ed., Kiev: Naukova Dumka, 1989.
6. Bochechka, O.O., Fiziko-khimichni osnovi spikannya almaznikh poroshkiv pid diєyu visokogo tisku ta visokoï temperature (Physicochemical Foundations of Sintering Diamond Powders under High Pressure and High Temperature), Kyiv: Naukova Dumka, 2019.
7. Bochechka, A.A., Destruction of diamond powder particles under high pressure, Sverkhtverd. Mater., 1993, no. 5, pp. 9–14.
8. Bochechka, O.O., Petasyuk, G.A., Chernienko, O.I., Kushch, O.V., Gavrilova, V.S., Gnatenko, I.O., and Garashchenko, V.V., Influence of the composition and properties of diamond powders synthesized in the Mg–Zn–C system on the formation of polycrystals from them during high-pressure sintering, in Instrumental’ne materialoznavstvo: zb. nauk. pr. (Instrumental Materials Science: Collection of Scientific Works), Kyiv: Inst. Nadtverd. Mater. im. V. M. Bakulya Nats. Akad. Nauk Ukr., 2021, vol. 24, pp. 237–249.
9. Bochechka, O.O., Petasyuk, G.A., Chernienko, O.I., Gavrilova, V.S., Venikov, V.O., Lyamtseva, A.O., and Kushch, O.V., Application of morphometric characteristics to assess the effect of high pressure on diamond powders of different grain composition at the AVT loading stage and during sintering, in Instrumental’ne materialoznavstvo: zb. nauk. pr. (Instrumental Materials Science: Collection of Scientific Works), Kyiv: Inst. Nadtverd. Mater. im. V. M. Bakulya Nats. Akad. Nauk Ukr., 2023, vol. 26, pp. 147–156.
10. Kivilis, S.S., Plotnomery (Density Meters), Moscow: Energiya, 1980.
11. Bochechka, O.O., Kushch, O.V., Isonkin, O.M., Petasyuk, G.A., Chernienko, O.I., Osipov, O.S., Havrylova, V.S., Borymskyi, O.I., and Rumiantseva, Yu.Yu., Effect of the granular composition of diamond powder synthesized in the Mg–Zn–C system on the structure, physicomechanical properties, and performance characteristics of crystals sintered from it under high pressure, J. Superhard Mater., 2023, vol. 45, no. 5, pp. 336–347. https://doi.org/10.3103/S106345762305002710.3103/S1063457623050027 ↗
12. Mackenzie, J.K. and Shuttleworth, R., A phenomenological theory of sintering, Proc. Phys. Soc. B., 1949, vol. 62, no. 12, pp. 833–852.10.1088/0370-1301/62/12/310 ↗
13. Bochechka, A.A. and Gargin, V.G., Evaluation of changes in pressure during sintering of diamond-hard alloy plates in a toroid-type high-pressure apparatus, Sverkhtverd. Mater., 1998, no. 3, pp. 31–39.
14. Bochechka, A.A., Romanko, L.A., Gavrilova, V.S., Konoval, S.M., and Nazarchuk, S.N., Special features of sintering diamond powders of various dispersions at high pressures, J. Superhard Mater., 2007, vol. 29, no. 1, pp. 17–23. https://doi.org/10.3103/S106345760701003010.3103/S1063457607010030 ↗