Silicon Nitride as a Ceramic Material of Technical Application: Specific Features of Diamond Treatment and Place among Other Ceramics
Source abstract
Abstract
Abstract The specific features of the diamond treatment of products from silicon nitride based ceramic have been studied. It has been shown that such ceramic is intermediate between oxide and oxide–carbide ceramic by the degree of oxidation, the temperature in the zone of treatment in the process of grinding, and the force indicators of the diamond grinding of ceramic materials. It has been established that, in terms of specific energy intensity, oxide ceramics are characterized by the lowest energy intensity in the process of their treatment. As compared to these ceramics, the energy intensity of the grinding of oxide–carbide ceramic is 2–3 times higher, and nitride ceramic is characterized by the highest specific energy intensity under both deep and elastic grinding conditions, so this fact should be taken into account when determining the conditions for the treatment of products from nitride ceramic.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Engineering Technology and Methodologies · Industrial Engineering and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Chen, F., Sun, X., Fang, B., Yan, K., Hong, J., and Yan, B., Tribological behavior and electrical insulation properties of micro-and nanoscale graphene/β-Si3N4 whisker-reinforced Si3N4 ceramics at low temperature, J. Mater. Res. Technol., 2025, vol. 36, pp. 1813–1821.10.1016/j.jmrt.2025.03.252 ↗
2. Sokhan’, S.V., Voznyy, V.V., and Sorochenko, V.H., Diamond grinding of ceramic balls based in a groove with circular feed under oscillation, J. Superhard Mater., 2025, vol. 47, no. 4, pp. 311–323.10.3103/S1063457625040094 ↗
3. Ardila, M.A.N., Costa, H.L., and de Mello, J.D.B., Influence of the ball material on friction and wear in microabrasion tests, Wear, 2020, vols. 450–451, p. 203266.10.1016/j.wear.2020.203266 ↗
4. Hashimoto, M. and Kanda, K., Mechanism of low friction coefficient of carbide ceramics and carbon-containing steels, Precis. Eng., 2023, vol. 79, pp. 1–6.10.1016/j.precisioneng.2022.08.008 ↗
5. Sun, X., Liu, B., Zhang, Sh., Wang, X., Zhao, S., Dai, W., and Tu, J., Tribological behavior of polycrystalline diamond compacts under alternating high and low temperature conditions in vacuum environment, Tribol. Int., 2025, vol. 203, p. 110404.10.1016/j.triboint.2024.110404 ↗
6. Gou, R., Zhao, J., and Luo, X., Tribological behavior of PDC-CR at different temperatures, Diamond Relat. Mater., 2024, vol. 144, p. 110950.10.1016/j.diamond.2024.110950 ↗
7. Liu, N., Lei, L., Lu, H., Jiang, H., Zhang, Y., Xiao, J., Zhang, J., Chen, X., and Xu, J., C–C bond rupture initiated graphitization achieves highly efficient diamond polishing, Int. J. Mech. Sci., 2025, vol. 287, p. 109958.10.1016/j.ijmecsci.2025.109958 ↗
8. Cui, X., Qin, Y., Han, X., Chen, H., Ruan, X., Zhang, H., Jiao, Ch., Mao, R., Hao, J., Zhao, S., Hou, Sh., Pian, X., Wang, Ya., Nishimura, K., Deng, L., and Jiang, N., Comparing the tribological behavior of polycrystalline diamonds against steel GCr15 and ceramic Si3N4: friction and wear, Diamond Relat. Mater., 2024, vol. 141, p. 110550.10.1016/j.diamond.2023.110550 ↗
9. Zhou, F., Jin, Y., Shao, Q., Yao, W., and Wang, H., Surface roughness and material removal of Si3N4 cylindrical rollers using double-side grinding with diamond film pads, J. Mater. Res. Technol., 2025, vol. 34, pp. 2788–2801.10.1016/j.jmrt.2024.12.234 ↗
10. Lavrinenko, V.I. and Novikov, M.V., Nadtverdi abrazivni materiali v mekhanoobrobtsi: entsiklopedichnii dovidnik (Superhard Abrasive Materials in Machining: Encyclopedic Reference), Novikov, M.V., Ed., Kyiv: Inst. Nadtverdykh Mater. Nats. Akad. Nauk Ukr., 2013.
11. Lavrinenko, V.I., On the analysis of the estimate of energy expenditures in the diamond abrasive treatment by wheels from superhard materials, J. Superhard Mater., 2022, vol. 44, no. 4, pp. 285–291.10.3103/S1063457622040050 ↗
12. Lavrinenko, V.I., Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding, J. Superhard Mater., 2016, vol. 38, no. 1, pp. 40–46.10.3103/S1063457616010068 ↗
13. Shepelev, A.A., Lavrinenko, V.I., Bodnaruk, N.I., Shklyarenko, V.V., and Laznyuk, V.D., Diamond grinding of silicon nitride- and boron carbide-based ceramic materials, Sverkhtverd. Mater., 1994, no. 3, pp. 43–47.