Single frequency seismic loading tests on pressurized branch pipe intersections machined from solid
Source abstract
Abstract
Four CNC machined, equal-thickness branch pipe intersections ( d m / D m = 1 and 0.746) have been tested under conditions of internal pressure, simulated seismic loading that induced resonant in-plane run pipe bending and, in one case, a superimposed gravity stress. The manufacturing method and testing conditions are described and the behaviour of the branches is reported. The strain responses of the components show that ratchetting is clearly significant while the response moment data suggest that collapse may not be the failure mechanism under these loading conditions. Failure for all components occurred by cracks on the flanks in the branch hoop stress direction just above the junction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Material Properties and Failure Mechanisms · Structural Integrity and Reliability Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, University of Liverpool, UK
References (25)
Show source-provided references
1. Carmichael G. D.T. ‘The CEGB aseismic piping research programme’, ASME, PVP Conference, 1990.
2. Beaney E. M. ‘Measurement of dynamic response and failure of pipework’, J. Strain, 1991, 89–94.10.1111/j.1475-1305.1991.tb00762.x ↗
3. English W. F. ‘Piping and fitting dynamic reliability program’, Fourth Semi-Annual Progress Report, NEDC-31542, EPRI contract RP 1543–15, 1988.
4. ASME, Section III, subsection NB, 1986.
5. The M.W. KELLOGG Company
6. 10.1016/0029-5493(87)90003-310.1016/0029-5493(87)90003-3 ↗
7. Markl A. R.C. ‘Fatigue tests on piping components’, Trans. Am. Soc. Mech. Engrs, 1952, 287–303.10.1115/1.4015762 ↗
8. 10.1115/1.345416310.1115/1.3454163 ↗
9. Moore S. E., Hayes J. K., Weed R. A. ‘Experimental stress analysis and fatigue tests of five 24 in. NPS ANSI standard B16.9 tees’, ORNL Report TM-9409, 1985.10.2172/5914008 ↗
10. 10.1243/PIME_PROC_1985_199_033_0210.1243/PIME_PROC_1985_199_033_02 ↗
11. 10.1111/j.1475-1305.1992.tb00793.x10.1111/j.1475-1305.1992.tb00793.x ↗
12. Newmark N. M.
13. Thulin F. A. ‘A shaker for seismic testing’, Proceedings of ASME Pressure Vessels and Piping Conference, 1985, Vol. 98–6, New Orleans, pp. 71–76.
14. Sasaki Y., Madarame H., Udoguchi T., Shibata H., Akino K. ‘Pipe rupture by seismic vibration test’, Proceedings of the Second International Pressure Vessel Conference, 1973, San Antonio USA, 1973, pp. 221–225.
15. 10.1115/1.292874810.1115/1.2928748 ↗
16. Chen W. P., Onesto A. T., De Vita V. ‘Seismic fragility test of a 6-inch diameter pipe system’, NUREG/CR-4859, 1987.10.2172/6189520 ↗
17. Moffat D. G., Mistry J. ‘Interaction of external moment loads with internal pressure on an equal diameter branch pipe intersection’, Proceedings of the Sixth International Conference on Pressure Vessel Technology, 1988, Beijing, Vol. 1, pp. 553–549.
18. Mwenifumbo J. A.M. ‘ Stress and flexibility analysis of branch pipe junctions by the finite element method ’, MSc Dissertation, University of Liverpool, 1988.
19. 10.1243/03093247V26208510.1243/03093247V262085 ↗
20. Yahiaoui K., Moffat D. G., Moreton D. N. ‘Rat-chetting behaviour of fabricated piping branch junctions under steady internal pressure and simulated seismic run pipe in-plane bending’, Proceedings of the Structural Integrity Assessment Conference, 1992 (Elsevier Applied Science, UK), pp. 111–123.
21. GE Nuclear Energy · ‘Piping and fitting dynamic reliability program’ · 1989 · 1
22. Rodabaugh E. C. ‘Stress indices, pressure design and stress intensification factors for laterals in piping’, WRC Bulletin No. 360.
23. Kirkwood M. G. ‘ Plastic loads for branch pipe junctions subjected to combined internal pressure and in-plane bending moments ’, PhD Thesis, University of Liverpool, 1989.
24. Kirkwood M. G., Moffat D. G. ‘Techniques for measuring plastic loads in branch pipe connections loaded by pressure and in-plane moments’, Pipework Engineering and Operation, 1989, I Mech E, London, 197–201.
25. Yahiaoui K., Moffat D. G., Moreton D. N. ‘The ratchetting behaviour of pressurised fabricated piping branch junctions under quasi-static fully reversed cyclic in-plane run pipe bending’, Pipework Engineering and Operation, 1993, I Mech E, London, in preparation.