An overview of progress in the study of fretting fatigue
Source abstract
Abstract
This paper attempts to review some of the developments in the study of fretting fatigue. It is not comprehensive, but focuses on issues relating to the mechanics of the problem, the current state of understanding and the contributions from this laboratory. Work in progress and the likely directions research will follow are discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Vibration and Dynamic Analysis · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Oxford Department of Engineering Science UK
References (65)
Show source-provided references
1. Waterhouse R. B. Fretting Corrosion, 1972 (Pergamon Press, USA.
2. Cattaneo C. · Reconditi dell Accademia nazionale dei Lincei · 1938 · 27 · 342
3. 10.1115/1.400997310.1115/1.4009973 ↗
4. 10.1098/rspa.1955.014910.1098/rspa.1955.0149 ↗
5. Bramhall R. Studies in fretting fatigue. DPhil thesis, University of Oxford, 1973.
6. 10.1520/STP25818S10.1520/STP25818S ↗
7. 10.1016/0043-1648(94)90173-210.1016/0043-1648(94)90173-2 ↗
8. 10.1016/0020-7403(87)90117-210.1016/0020-7403(87)90117-2 ↗
9. Jäger J. Elastic impact with friction. PhD thesis, Technical University of Delft, 1992.
10. 10.1115/1.283376510.1115/1.2833765 ↗
11. 10.1016/S0020-7683(97)00154-610.1016/S0020-7683(97)00154-6 ↗
12. 10.1243/095440698152125910.1243/0954406981521259 ↗
13. 10.1243/030932499151373110.1243/0309324991513731 ↗
14. Navarro C., Mugadu A., Hills D. A., Dominguez J. The influence of underlying tension on stabilising partial slip in complete and nearly complete contacts Int. J. Mech. Sci., 2002 (under review).10.1016/S0020-7403(03)00041-9 ↗
15. 10.1115/1.283377410.1115/1.2833774 ↗
16. 10.1016/S0020-7403(98)00127-110.1016/S0020-7403(98)00127-1 ↗
17. 10.1016/S0020-7403(01)00005-410.1016/S0020-7403(01)00005-4 ↗
18. Mugadu A., Hills D. A. A shrink-fitted peg subjected to cyclic loading J. Mech. Engng Sci., 2000, 713–725.10.1243/0954406011524072 ↗
19. 10.1243/030932400151410710.1243/0309324001514107 ↗
20. Sackfield A., Barber J., Hills D. A., Truman C. E. A shrink fit shaft subject to tension European J. Mechanics, Part A, Solids (in press).
21. 10.1299/jsme1958.17.64710.1299/jsme1958.17.647 ↗
22. Milestone W. D. · Wear · 1981 · 18 · 219
23. Kitagawa H. · 1976 · 627
24. 10.1520/STP16238S10.1520/STP16238S ↗
25. 10.1016/S0142-1123(99)00077-810.1016/S0142-1123(99)00077-8 ↗
26. 10.1016/0043-1648(90)90155-410.1016/0043-1648(90)90155-4 ↗
27. Smith R. N. · J. Mater. · 1970 · 5 · 767
28. Fatemi A. · Fatigue and Fract. of Engng Mater. Structs · 1998 · 11 · 145
29. Dang Van K. · 1989
30. 10.1016/0921-5093(94)90959-810.1016/0921-5093(94)90959-8 ↗
31. Ruiz C. · I MechE Conference Publications · 1986 · 1 · 187
32. Neu R. W. · 1999
33. Swalla-Michaud D. R., Pape J. A., Neu R. W. Characterisation of a fretting fatigue process volume. Presented at the 3rd International Symposium on Fretting Fatigue, Nagaoka, Japan, May 2001.
34. Araújo J. A., Nowell D. Prediction of fretting fatigue life using averaged multiaxial initiation parameters Modern Practice in Stress and Vibration Analysis, 2001, 223–234.
35. 10.1016/0043-1648(96)06937-210.1016/0043-1648(96)06937-2 ↗
36. Ciavarella M., Dini D., Demelio G. P. A critical assessment of damage parameters for fretting fatigue. Presented at the 3rd International Symposium on Fretting Fatigue, Nagaoka, Japan, May 2001.
37. Wright G. P. Studies in fretting fatigue. DPhil thesis, University of Oxford, 1970.
38. Lau M. G. A study of damping capacity and stress distribution in a shrink-fitted assembly subjected to cyclic torque. DPhil thesis, University of Oxford, 1972.
39. O'Connor J. J. · 1986
40. 10.1016/0043-1648(88)90198-610.1016/0043-1648(88)90198-6 ↗
41. 10.1007/978-94-015-8281-010.1007/978-94-015-8281-0 ↗
42. 10.1016/0043-1648(96)06937-210.1016/0043-1648(96)06937-2 ↗
43. 10.1046/j.1460-2695.1999.00145.x10.1046/j.1460-2695.1999.00145.x ↗
44. 10.1016/S0043-1648(02)00007-810.1016/S0043-1648(02)00007-8 ↗
45. 10.1243/030932401151464710.1243/0309324011514647 ↗
46. Nowell D. · 2000 · 61
47. Hyde T. R. et al.
48. 10.1016/S0022-5096(01)00091-610.1016/S0022-5096(01)00091-6 ↗
49. 10.1016/S0020-7683(01)00210-410.1016/S0020-7683(01)00210-4 ↗
50. Navarro C., Hills D. A., Dominguez J. The effect of corner radius on an asymptotic solution to the fretting of complete contacts Fatigue and Fract. of Engng Mater. Structs, 2002 (under review).10.1046/j.1460-2695.2003.00608.x ↗
51. Sackfield A., Mugadu A., Hills D. A. The influence of an edge radius on the local stress field at the edge of a complete fretting contact Int. J. Solids Structs, 2002 (accepted).10.1016/S0020-7683(02)00337-2 ↗
52. Tur M., Fuenmayor J., Mugadu A., Hills D. A. On the analysis of singular stress fields. Part 2: Finite element formulation and application to frictional contacts J. Strain Analysis, 2002 (under review).10.1243/030932403765310545 ↗
53. 10.1002/nme.162015090710.1002/nme.1620150907 ↗
54. 10.1299/jsme1958.11.43710.1299/jsme1958.11.437 ↗
55. 10.1299/jsme1958.12.69210.1299/jsme1958.12.692 ↗
56. Brown M. W. · ESIS Publication · 1994 · 18
57. 10.1016/S0022-5096(01)00123-510.1016/S0022-5096(01)00123-5 ↗
58. 10.1243/03093240276020389210.1243/030932402760203892 ↗
59. Dobromirski J. · 1993 · 60
60. Goracheva I. G., Rajeev P. T., Murthy H., Farris T. N. Wear in partial slip contacts. Presented at 36th Annual Technology Meeting of Society of Engineering Science, Austin, Texas, 25–27 October 1999, Abstract MC1–1.
61. 10.1016/S0043-1648(99)00253-710.1016/S0043-1648(99)00253-7 ↗
62. 10.1016/0020-7403(86)90076-710.1016/0020-7403(86)90076-7 ↗
63. 10.1016/S0020-7683(96)00091-110.1016/S0020-7683(96)00091-1 ↗
64. 10.1520/STP14720S10.1520/STP14720S ↗
65. 10.1016/S0997-7538(99)00117-510.1016/S0997-7538(99)00117-5 ↗