journal article·2021-03Open access

Enhanced photoluminescence, electrochemical and photocatalytic activity of combustion synthesized La10Si6O27:Dy3+ nanophosphors

A. Naveen Kumar, D.M. Jnaneshwara, H. Nagabhushana, S.C. Prashantha, M. Chandrasekhar, C.R. Ravikumar, M.R. Anil Kumar, N. Basavaraju, T.R. Shashi Shekhar, H.B. Premkumar

Abstract

In the present investigation, the wet chemical combustion method was used for the first time to prepare La10Si6O27 phosphors by incorporating Dy3+(1–11 mol %) cations (LNPs). The powder X-ray diffraction patterns of LNPs display the oxyapatite hexagonal phase. The estimated crystallite size, using Scherer's method, is between 20 and 30 nm and the same was confirmed via Transmission Electron Microscopy (TEM). The bandgap energy (Eg) values calculated from diffuse reflection data were in the range of 5.6–5.72 eV. The emission spectrum is composed of characteristic transitions of Dy3+ cations (intra 4f), namely 4F9/2 → 6H15/2 (blue-479 nm), 4F9/2 → 6H13/2 (yellow-578 nm) and 4F9/2 → 6H11/2 (red-670 nm) under near-UV excitation energies. The emission results confirm the choice of using LNPs in applications of white light emitting diodes and the same was found in Color chromaticity coordinates. The white emission intensity was attributed to inherent defects, in particular oxygen vacancies which could contribute to the transfer of energy from the host to dopant ions. The results from current–voltage (CV) and electrochemical impedance spectra (EIS) show the strong electrochemical properties of LNPs. The solution of paracetamol and sildenafil (Penagra) was effectively sensed using modified carbon paste electrodes. LNPs showed a good photocatalytic activity (PCA) for Orange Red (OR) dye under UV light irradiation. These results indicate that the synthesized LNPs are a good candidate for displays, waste water treatment and for the use as electrochemical sensors.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Advanced Photocatalysis Techniques · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Photoluminescence and photometric studies of low temperature prepared red emitting MgAl2O4:Cr3+ nanophosphors for solid state displays
2. Role of La3+ ion substitution sites on the photoluminescence properties of the SrTiO3:Eu3+ phosphors
3. Synthesis of Eu3+-activated BaMoO4 phosphors and their Judde Ofelt analysis:applications in lasers and white LEDs10.1016/j.saa.2015.06.045 ↗
4. Luminescence in trivalent rare earth activated Sr4Al2O7 phosphor10.1016/j.ijleo.2012.11.064 ↗
5. “White luminescence in Dy3+ doped BiOCl phosphors and their Judd–Ofelt analysis”10.1016/j.dyepig.2015.10.032 ↗
6. MgO:Dy3+nanophosphor: self ignition route, characterization and its photoluminescence properties10.1016/j.matchar.2014.08.008 ↗
7. Tunable white light emissive Mg2SiO4:Dy3+nanophosphor: its photoluminescence, Judde Ofelt and photocatalytic studies10.1016/j.dyepig.2015.12.014 ↗
8. Low temperature synthesis and photoluminescence properties of red emitting Mg2SiO4:Eu3+nanophosphor for near UV light emitting diodes10.1016/j.snb.2014.01.018 ↗
9. Synthesis and characterization of calcium and iron co-doped lanthanum silicate oxyapatites by solgel process for solid oxide fuel cells10.1016/j.jpowsour.2015.06.008 ↗
10. Luminescence properties of long persistent phosphors BaZrSi3O9:R3+ (R = Eu, Sm, Dy, Tb and Pr) based on host sensitization10.1016/j.optmat.2014.01.028 ↗
11. “Ionic conductivity of apatite-type solid electrolyte material, La10−XBaXSi6O27−X/2 (X = 0–1), and its fuel cell performance”10.1016/j.jpowsour.2010.01.050 ↗
12. High-pressure phase transition and unusual compressibility of apatite-type La10Si6O2710.1016/j.jallcom.2013.09.216 ↗
13. Sol-gel synthesis and characterization of Zn2+ and Mg2+ doped La10Si6O27 electrolytes for solid oxide fuel cells10.1016/j.solidstatesciences.2015.08.001 ↗
14. Influence of pentavalent niobium doping on microstructure and electrical conductivity of oxy-apatite La10Si6O27 electrolytes10.1016/j.electacta.2014.12.017 ↗
15. Fabrication of c-axis-oriented apatite-type polycrystalline La10Si6O27 ceramic and its anisotropic oxide ionic conductivity10.1016/j.ceramint.2013.05.136 ↗
16. Denis kuznetsovd, “nano CuO: electrochemical sensor for the determination of paracetamol and D-glucose”10.1016/j.jpcs.2019.06.012 ↗
17. A simple combustion method for the synthesis of multi-functional ZrO2/CuOnanocomposites: excellent performance as Sunlight photocatalysts and enhanced latent finger print detection10.1016/j.apcatb.2017.03.055 ↗
18. Influence of zinc additive and pH on the electrochemical activities of b-nickel hydroxide materials and its applications in secondary batteries
19. Synthesis and electrical properties of apatite-type La10Si6O2710.1016/j.jpowsour.2009.10.088 ↗
20. Facile combustion synthesized orthorhombic GdAlO3:Eu3+nanophosphors: structural and photoluminescence properties for WLEDs10.1016/j.jlumin.2015.03.006 ↗
21. A benign approach for tailoring the photometric properties and Judd-Ofelt analysis of LaAlO3:Sm3+nanophosphors for thermal sensor and WLED applications10.1016/j.snb.2016.12.080 ↗
22. Bio-inspired route for the synthesis of spherical shaped MgO:Fe3+ nanoparticles: structural, photoluminescence and photocatalytic investigation10.1016/j.saa.2015.05.003 ↗
23. Einbeitragzuroptik der farbanstriche
24. Theory of concentration quenching in inorganic phosphors10.1063/1.1740265 ↗
25. Synthesis of Eu3+activated ZnO superstructures: photoluminescence, Judd–Ofelt analysis and Sunlight photocatalytic properties10.1016/j.molcata.2015.08.002 ↗
26. Photoluminescence and photocatalytic properties of novel Bi2O3:Sm3+ nanophosphor
27. Impacts of core shell structure on structural and photoluminescence properties of CaTiO3:Sm3+, Li+ nanoparticles for solid state display applications10.1088/2053-1591/ab1d1d ↗
28. Facile synthesis of ZnO flowers modified graphene like MoS2 sheets for enhanced visible light-driven photocatalytic activity and antibacterial properties10.1016/j.jallcom.2016.04.267 ↗
29. Zn doped CdO nanoparticles: structural, morphological, optical, photocatalytic and anti-bacterial properties10.1016/j.jcis.2017.05.026 ↗
30. Enhanced photocatalytic and electrochemical performance of TiO2-Fe2O3nanocomposite: its applications in dye decolorization and as supercapacitors10.1038/s41598-020-58110-7 ↗
31. Decoration of silver nanoparticles on activated graphite substrate and their electrocatalytic activity for methanol oxidation
32. Synthesis, spectroscopic analysis and electrochemical performance of modified β-nickel hydroxide electrode with CuO
33. Role of heat on the development of electrochemical sensors on bare and modified Co3O4/CuO composite nanopowder carbon paste electrodes10.1016/j.msec.2015.08.002 ↗
34. A simple and low-cost poly (dl-phenylalanine) modified carbon sensor for the improved electrochemical analysis of Riboflavin
35. Development of a new electrochemical sensor based on silver sulfide nanoparticles and hierarchical porous carbon modified carbon paste electrode for determination of cyanide in river water samples10.1016/j.snb.2019.02.053 ↗