Additively manufactured Zn–Mg alloys as orthopedic implants: effects of laser power and scanning rates
Source abstract
Abstract
Additive manufacturing of biodegradable metals enables patient-specific orthopedic implants that can resorb in vivo and avoid removal surgery. Among candidates, Zn–Mg alloys balance Zn’s limited bioactivity with Mg’s rapid corrosion. The enhanced osteogenesis has been demonstrated through additive manufacturing of Zn-Mg alloys scaffolds. However, the effects of processing parameters (laser power and scanning rates) on microstructures, mechanical properties, degradation, and osteogenesis are not systemically investigated. Here we fabricate Zn–3Mg alloys by laser powder bed fusion (L-PBF). Porosities of additively manufactured Zn-Mg alloys are decreased, achieving high yield strength (compression) over 600 MPa at a 70 W laser power and a 600 mm/s of scanning rate. Corrosion rates are reduced to ∼0.1 μm/day by forming dense degradation products on the surface of Zn-Mg alloys. In vitro and in vivo studies show markedly improved bone regeneration compared with bioinert Ti. This benefit correlates with reduced release of Zn 2+ and Mg 2+ , enhancing cytocompatibility and promoting osteogenic differentiation. These results clarify processing parameters–microstructures–properties–biology relationships in biodegradable Zn-based alloys and provide guidance for engineering next-generation orthopedic implants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Additive Manufacturing Materials and Processes · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Multiscale architecture design of 3D printed biodegradable Zn-based porous scaffolds for immunomodulatory osteogenesis10.1038/s41467-024-47189-5 ↗
2. Biodegradable zinc-based metallic materials: mechanisms, properties, and applications
3. Improving biocompatibility for next generation of metallic implants10.1016/j.pmatsci.2022.101053 ↗
4. Towards load-bearing biomedical titanium-based alloys: from essential requirements to future developments10.1016/j.pmatsci.2024.101277 ↗
5. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
6. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
7. Fundamental theory of biodegradable metals—definition, criteria, and design10.1002/adfm.201805402 ↗
8. HA coating on Mg alloys for biomedical applications: a review10.1016/j.jma.2020.05.003 ↗
9. Biodegradable Mg alloys for orthopedic implants – a review10.1016/j.jma.2021.06.024 ↗
10. Bridging research and application: Zn-based alloys as next-generation biodegradable orthopedic implants
11. A potent antibacterial and antitumor Zn–4Ag–2Se alloy for biodegradable orthopedic applications10.1007/s12598-025-03417-5 ↗
12. Ultrahigh strength and uniform corrosion in Zn-Li alloys through ultrahigh pressure supersaturated solid solution treatment for biodegradable orthopedic applications10.1007/s12598-024-02753-2 ↗
13. Alloying design of biodegradable zinc as promising bone implants for load-bearing applications10.1038/s41467-019-14153-7 ↗
14. Mechanical properties, degradation action, and biocompatibility of in situ nanoparticle-reinforced MgxZny/Zn composite prepared via roll bonding10.1016/j.actbio.2025.01.048 ↗
15. Structural and mechanical aspects of hypoeutectic Zn-Mg binary alloys for biodegradable vascular stent applications
16. 380 MPa-30% grade biodegradable zn-mn-mg-ca alloy: bimodal grain structure, large work-hardening strain, and enhanced biocompatibility10.1016/j.actbio.2024.12.050 ↗
17. A long-term quasi-equivalent in vitro study of high-strength Zn alloy interference screws for anterior cruciate ligament reconstruction
18. Fabrication and performance of Zinc-based biodegradable metals: from conventional processes to laser powder bed fusion
19. Toward multiscale, multimaterial 3D printing10.1002/adma.202314204 ↗
20. Material–structure–function integrated additive manufacturing of degradable metallic bone implants for load-bearing applications10.1002/adfm.202213128 ↗
21. Corrosion fatigue behavior and anti-fatigue mechanisms of an additively manufactured biodegradable zinc-magnesium gyroid scaffold10.1016/j.actbio.2022.09.047 ↗
22. Mimicking the mechanical properties of cortical bone with an additively manufactured biodegradable Zn-3Mg alloy10.1016/j.actbio.2024.05.023 ↗
23. Magnesium-induced strengthening, degradation and osteogenesis for additively manufactured Zn-Mg orthopedic implants10.1016/j.actbio.2025.03.025 ↗
24. Influence of magnesium addition on microstructural and mechanical stability of hydrostatically extruded biodegradable zinc alloys
25. Zn-0.4Li alloy shows great potential for the fixation and healing of bone fractures at load-bearing sites10.1016/j.cej.2021.129317 ↗
26. Zn-Mg and Zn-Cu alloys for stenting applications: from nanoscale mechanical characterization to in vitro degradation and biocompatibility
27. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: a comprehensive review10.1016/j.actbio.2019.01.035 ↗
28. Zinc-based alloys for degradable vascular stent applications10.1016/j.actbio.2018.03.005 ↗
29. Effect of grain structure on the mechanical properties and in vitro corrosion behavior of additively manufactured pure Zn
30. Laser additive manufacturing of zinc: formation quality, texture, and cell behavior10.1007/s42242-022-00216-0 ↗
31. Rare earth improves strength and creep resistance of additively manufactured Zn implants10.1016/j.compositesb.2021.108882 ↗
32. Effect of laser power on microstructure and mechanical properties of pure Zn fabricated via laser powder bed fusion10.1016/j.jmrt.2023.12.159 ↗
33. Multi-physics modeling of laser melted magnesium alloy: bridging melt pool dynamics to microstructure evolution10.1016/j.jma.2025.06.032 ↗
34. Laser powder bed fusion of biodegradable magnesium alloys: process, microstructure and properties10.1088/2631-7990/ad967e ↗
35. Hall–petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
36. Seventy years of hall-petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress10.1016/j.pmatsci.2023.101131 ↗
37. Impact of scandium on the microstructure, mechanical properties, corrosion behaviors and in-vitro biocompatibility of a Zn-0.1Li alloy10.1016/j.jmst.2025.01.012 ↗
38. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
39. Novel Zn-based alloys for biodegradable stent applications: design, development and in vitro degradation10.1016/j.jmbbm.2016.03.018 ↗
40. Microstructure, mechanical properties and fracture behavior of As-Extruded Zn–Mg binary alloys10.1007/s40195-017-0585-4 ↗
41. Alloying design strategy for biodegradable zinc alloys based on first-principles study of solid solution strengthening10.1016/j.matdes.2021.109676 ↗
42. Evolution of Mg–Zn second phases during ECAP at different processing temperatures and its impact on mechanical properties of Zn-1.6Mg (wt.%) alloys10.1016/j.jallcom.2019.151987 ↗
43. Improved mechanical properties and extraordinary plastic isotropy of ultrafine-grained pure Zn prepared by spark plasma sintering using fine particle and heat treatment10.1016/j.msea.2025.148097 ↗
44. Laser additive manufacturing of Zn metal parts for biodegradable applications: processing, formation quality and mechanical properties10.1016/j.matdes.2018.05.057 ↗
45. Revealing anisotropic mechanisms in mechanical and degradation properties of zinc fabricated by laser powder bed fusion additive manufacturing10.1016/j.jmst.2024.06.045 ↗
46. Fatigue behavior of biodegradable Zn-Li binary alloys in air and simulated body fluid with pure Zn as control10.1016/j.actbio.2023.07.030 ↗
47. Corrosion fatigue behavior of additively manufactured biodegradable porous zinc10.1016/j.actbio.2020.02.001 ↗
48. Effect of grain size and volume fraction of eutectic structure on mechanical properties and corrosion behavior of as-cast Zn-Mg binary alloys10.1016/j.jmrt.2021.12.101 ↗
49. Ultrafine- and uniform-grained biodegradable Zn-0.5Mn alloy: grain refinement mechanism, corrosion behavior, and biocompatibility in vivo10.1016/j.msec.2020.111391 ↗
50. Suppression mechanism of initial pitting corrosion of pure Zn by Li alloying10.1016/j.corsci.2021.109564 ↗
51. A detailed mechanism of degradation behaviour of biodegradable as-ECAPed Zn-0.8Mg-0.2Sr with emphasis on localized corrosion attack
52. Corrosion behavior of biodegradable metals in two different simulated physiological solutions: Comparison of Mg, Zn and Fe10.1016/j.corsci.2021.109278 ↗
53. Electrochemical properties and corrosion induced mechanical degradation of biomedical zn–cu–li alloy in simulated body fluid10.1016/j.matdes.2024.113161 ↗
54. Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition10.1016/j.jmst.2022.03.006 ↗
55. Additively manufactured pure zinc porous scaffolds for critical-sized bone defects of rabbit femur
56. Additive manufacturing of Zn-Mg alloy porous scaffolds with enhanced osseointegration: in vitro and in vivo studies10.1016/j.actbio.2022.03.055 ↗
57. Additively manufactured Zn-2Mg alloy porous scaffolds with customizable biodegradable performance and enhanced osteogenic ability10.1002/advs.202307329 ↗
58. A novel magnesium ion-incorporating dual-crosslinked hydrogel to improve bone scaffold-mediated osteogenesis and angiogenesis10.1016/j.msec.2021.111868 ↗
59. Magnesium ion stimulation of bone marrow stromal cells enhances osteogenic activity, simulating the effect of magnesium alloy degradation10.1016/j.actbio.2014.02.002 ↗
60. Feasibility evaluation of a Zn-Cu alloy for intrauterine devices: in vitro and in vivo studies10.1016/j.actbio.2022.01.053 ↗
61. Long-term in vivo study of biodegradable Zn-Cu stent: a 2-year implantation evaluation in porcine coronary artery10.1016/j.actbio.2019.08.012 ↗
62. Degradable Zn–5Ce alloys with high strength, suitable degradability, good cytocompatibility, and osteogenic differentiation fabricated via hot-rolling, hot-extrusion, and high-pressure torsion for potential load-bearing bone-implant application10.1016/j.jmrt.2023.12.098 ↗
63. Improved degradable, mechanical, and osteoimmunity-regulating performances of additively manufactured Zn-Mg alloy with heterogeneous microstructure for augmented bone regeneration10.1016/j.cej.2025.163897 ↗