Near UV-light excitable SrAl2O4:Eu3+ nanophosphors for display device applications
Source abstract
Abstract
Near UV-light excitable inorganic phosphors are widely recommended for white-light emitting diode (wLED) applications. Here in this paper we prepared Eu3+ doped SrAl2O4 phosphors with various concentrations of Eu3+ (1–5 mol%) by a green combustion technique. The phase structure and purity of all prepared nanopowders (NPs) were studied by X-ray diffraction analysis. The prepared NPs showed a fibre-like morphology which is confirmed by scanning electron microscopy results. The particle size as obtained by the transmission electron microscopy results is found to be around 40 nm. Further, the elemental composition showed the presence of doped Eu3+ ions into the SrAl2O4 host. The photoluminescence (PL) spectra of Eu3+ ions doped SrAl2O4 compounds are studied in detail. From the PL studies it is observed that the intense peak at 618 nm is due to the 5D0→7F2 transition of Eu3+ ions under 393 nm (near UV-light) excitation wavelength. The emission color and the chromaticity values of the NPs are studied, which suggest a strong red emission. The average estimated co-related temperature value is observed to be ~2688 K. This temperature value indicates that these phosphor powders can be used for warm LED applications. The color purity (CP) of the synthesized NPs has been calculated and the value is found to be 88%, which indicates that the prepared phosphor powders are highly useful for the red component in white light emitting diodes under UV light excitation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Luminescence and Fluorescent Materials · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Shape controllable ultrasound assisted fabrication of CaZrO3: Dy3+ hierarchical structures for display, dosimetry and advanced forensic applications10.1016/j.jallcom.2018.05.016 ↗
2. Red and green emitting CTAB assisted CdSiO3:Tb3+/Eu3+ nanopowders as fluorescent labeling agents used in forensic and display applications10.1016/j.dyepig.2017.08.011 ↗
3. Ultrasound assisted rare earth doped Wollastonite nanopowders: labeling agent for imaging eccrine latent fingerprints and cheiloscopy applications10.1016/j.jiec.2017.02.019 ↗
4. Sonochemically assisted hollow/solid BaTiO3:Dy3+ microspheres and their applications in effective detection of latent fingerprints and lip prints
5. Luminescence studies on the europium doped strontium metasilicate phosphor prepared by solid state reaction method
6. Studies on the luminescence properties of CaZrO3:Eu3+ phosphors prepared by the solid state reaction method
7. Tam · J. Sci.: Adv. Mater. Devices · 2016 · 1 · 204
8. The effect of templates on the morphological and optical properties of BaMgAl10O17:Eu2+ phosphors10.1016/j.vacuum.2018.12.025 ↗
9. Structure, morphology and optical characterization of Dy3+-doped BaYF5 nanocrystals for warm white light emitting devices10.1016/j.optmat.2017.05.002 ↗
10. Pharmacology and toxicology of europium chloride10.1002/jps.2600540435 ↗
11. The acute mammalian toxicity of rare earth nitrates and oxides10.1016/0041-008X(63)90067-X ↗
12. Near-Infrared-light-Mediated imaging of latent fingerprints based on molecular recognition10.1002/anie.201308843 ↗
13. Latent fingerprint imaging using Dy and Sm codoped HfO2 nanophosphors: structure and luminescence properties, part10.1002/ppsc.201900048 ↗
14. A review on the advancements in phosphor-converted light emitting diodes (pc-LEDs): phosphor synthesis, device fabrication and characterization10.1016/j.pmatsci.2019.100622 ↗
15. Fingermark detection on non-porous and semi-porous surfaces using NaYF4:Er, Yb up-converter particles10.1016/j.forsciint.2010.09.020 ↗
16. The Impact of Luminescence in technological scale
17. The effective fingerprint detection application using Gd2Ti2O7:Eu3+ nanophosphors10.1016/j.jallcom.2018.01.116 ↗
18. Effect of Eu doping on room temperature phase and phase transition of Sr2SiO4:Eu2+ phosphor synthesized by polymerized complex method10.1016/j.jpcs.2019.05.014 ↗
19. Evolution of CaGd2ZnO5:Eu3+ nanostructures for rapid visualization of latent fingerprints10.1039/C7TC00852J ↗
20. Influence of doping and annealing temperature on the structural and optical properties of Mg2SiO4:Eu3+ synthesized by combustion method10.1016/j.cap.2016.04.001 ↗
21. Potential white-light long-lasting phosphor: Dy3+-doped aluminate10.1063/1.1925778 ↗
22. Preparation, crystal structure and photoluminescence properties of Ce3+ activated Ba3Y1−yLuyAl2O7.5 phosphors for near-UV LEDs10.1016/j.cej.2017.01.044 ↗
23. Luminescence and thermoluminescence properties of a red emitting phosphor, Sr4Al14O25:Eu3+10.1016/j.jallcom.2016.04.232 ↗
24. Synthesis and photoluminescence properties of Ba3Al2O6:Eu3+ red phosphor10.1007/s10853-016-9843-5 ↗
25. Development of Tb3+ activated gadolinium aluminate garnet (Gd3Al5O12) as highly efficient green-emitting phosphors10.1016/j.jlumin.2016.06.029 ↗
26. EPR and optical properties of Eu2+ and Mn2+ co-doped MgSrAl10O17 blue–green light emitting powder phosphors10.1016/j.jlumin.2016.06.015 ↗
27. Synthesis and photoluminescence properties of Mn4+-doped magnetoplumbite-related aluminate X-type Ca2Mg2Al28O46 and W-type CaMg2Al16O27 red phosphors10.1016/j.ceramint.2017.02.149 ↗
28. Tunable luminescence properties of SrAl2O4: Eu3+ phosphors for LED applications10.1016/j.molstruc.2018.10.060 ↗
29. Effect of red emitting fluorescent pigment on fluorescent color of SrAl2O4:Eu2+, Dy3+ phosphors10.1016/S1002-0721(17)60907-4 ↗
30. UV excited SrAl2O4:Tb3+ nanophosphors for photonic applications10.1016/j.mssp.2019.104722 ↗
31. The red persistent luminescence of (Sr, Ca)AlSiN3:Eu2+ and mechanism different to SrAl2O4:Eu2+, Dy3+10.1016/j.jlumin.2018.12.069 ↗
32. Antimicrobial properties of green synthesis of MgO micro architectures via Limonia acidissima fruit extract10.1016/j.bcab.2019.01.029 ↗
33. Evolution of shapes and identification of level II and III features of fingerprints using CaZrO3:Sm3+ fluorescent markers prepared via solution combustion route10.1016/j.optmat.2018.11.058 ↗
34. Mimosa pudica mediated praseodymium substituted calcium silicate nanostructures for white LED application10.1016/j.jallcom.2016.08.064 ↗
35. Green synthesis, structural characterization and photoluminescence properties of Sm3+ co-doped Y2SiO5:Ce3+ nanophosphors for wLEDs10.1016/j.ijleo.2016.03.034 ↗
36. Thermoluminescence and infrared stimulated luminescence in long persistent monoclinic SrAl2O4:Eu2+, Dy3+ and SrAl2O4:Eu2+, Nd3+ phosphors10.1016/j.optmat.2019.04.015 ↗
37. Zinc silicates with tunable morphology by surfactant assisted sonochemical route suitable for NUV excitable white light emitting diodes10.1016/j.ultsonch.2016.07.002 ↗
38. Multifunctional Dy (III) doped di-calcium silicate array for boosting display and forensic applications10.1016/j.jre.2017.11.013 ↗
39. Rational design of monovalent ions (Li, Na, K) co-doped ZnAl2O4:Eu3+ nanocrystals enabling versatile robust latent fingerprint visualization10.1016/j.jre.2018.11.003 ↗
40. Pivotal role of fluxes in BaTiO3:Eu3+ nano probes for visualization of latent fingerprints on multifaceted substrates and anti-counterfeiting applications10.1016/j.microc.2018.10.020 ↗
41. Metastable scheelite CdWO4:Eu3+ nanophosphors: solvothermal synthesis, phase transitions and their polymorph-dependent luminescence properties10.1016/j.dyepig.2017.08.025 ↗
42. Interpretation of europium (III) spectra10.1016/j.ccr.2015.02.015 ↗
43. Charge compensated derived enhanced red emission from Sr3(VO4)2:Eu3+ nanophosphors for white light emitting diodes and flat panel displays10.1016/j.jallcom.2017.03.139 ↗
44. Rapid visualization of latent fingerprints using novel CaSiO3:Sm3+ nanophosphors fabricated via ultrasound route10.1016/j.jre.2018.04.019 ↗
45. Photoluminescence, thermoluminescence and evaluation of some parameters of Dy3+ activated Sr5(PO4)3F phosphor synthesized by sol-gel method10.1016/j.jallcom.2016.07.114 ↗
46. Energy transfer between inequivalent Eu2+ ions10.1016/0022-4596(86)90233-1 ↗
47. A theory of sensitized luminescence in solids10.1063/1.1699044 ↗
48. 1987
49. Correlated color temperature as an explicit function of chromaticity coordinates10.1002/col.5080170211 ↗
50. A single host white light emitting Zn2SiO4: Re3+ (Eu, Dy, Sm) phosphor for LED applications10.1016/j.ijleo.2014.07.149 ↗