Preparation of silicone- bismaleimide photosensitive resin and its application in 3D printing
Source abstract
Abstract
In recent years, light-curing 3D printing technology has been extensively adopted across various fields due to its advantages, including high precision and efficiency. As the key material in this technology, the properties of photosensitive resin directly influence the mechanical strength, thermal stability, and functional characteristics of the printed parts. Bismaleimide (BMI) resin exhibits excellent heat resistance, dielectric properties, and mechanical strength. However, its inherent brittleness and poor processability have limited its application in 3D printing. To address these challenges, this study synthesized a BAG oligomer containing flexible siloxane segments and photosensitive groups via a Michael addition reaction. This oligomer was incorporated into a photosensitive resin system to develop a novel BMI resin tailored for light-curing 3D printing. The effects of varying BAG content on the resin’s rheological behavior, 3D printing compatibility, mechanical performance, thermal stability, dynamic thermomechanical properties, water absorption, and dielectric characteristics were systematically investigated. The results demonstrated that at a BAG oligomer content of 10 wt%, the resin achieved optimal overall performance, with tensile strength and flexural strength reaching 56.9 MPa and 148.8 MPa, respectively. Additionally, impact strength increased continuously with higher BAG content, peaking at 11.5 kJ/m 2 . The maximum decomposition temperature (T max) rose to 421.4°C, accompanied by a notable increase in char residue. Dynamic mechanical analysis indicated an increase in storage modulus to 1704.5 MPa and cross-linking density, although the glass transition temperature (T g ) experienced a slight decline. While the addition of BAG marginally elevated the dielectric constant (D k ), it significantly reduced dielectric loss (D f ) to 0.010, underscoring favorable dielectric properties. In summary, this work develops and validates a BMI-based photosensitive resin that simultaneously meets the critical requirements for printability, mechanical performance, thermal stability, and dielectric properties, presenting a formulation with practical potential for broadening the use of BMI in light-curing 3D printing. • A photosensitive resin (BAG) containing organic silicon bismaleimide was synthesized. • The BAG photosensitive resin demonstrates exceptional UV-curing activity enabling high-precision in SLA printing. • The BAG photosensitive resin has excellent mechanical properties and dielectric properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Synthesis and properties of polymers · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Future of additive manufacturing: overview of 4d and 3d printed smart and advanced materials and their applications10.1016/j.cej.2020.126162 ↗
2. 3d printing of photocuring elastomers with excellent mechanical strength and resilience10.1002/marc.201800873 ↗
3. Think and print: 3d printing of chemical experiments10.1021/acs.jchemed.0c00416 ↗
4. Photo-Curing 3d printing technique and its challenges
5. 3d printing in fiber-device technology10.1007/s42765-020-00056-6 ↗
6. On the environmental impacts of 3d printing technology
7. Research on mechanical properties of Ink‐Jet, uv‐thermal dual‐cured 3d printing materials and a comparison of the properties of Ink‐Jet, lcd and uv‐thermal dual‐cured 3d printing materials10.1002/pat.6109 ↗
8. Extrusion 3d printing of polymeric materials with advanced properties
9. Application of 3d printing in medicine10.1016/j.ihj.2016.01.009 ↗
10. Toward multiscale, multimaterial 3d printing
11. Advances in materials and technologies for digital light processing 3d printing10.1186/s40580-024-00452-3 ↗
12. The role of 3d printing technologies in soft grippers10.1002/adma.202307963 ↗
13. Sustainable advances in Sla/Dlp 3d printing materials and processes10.1039/D1GC01489G ↗
14. Cycloaliphatic epoxy-functionalized polysiloxanes for Uv-Mask 3d printing via cationic photopolymerization
15. Uv-curable, 3d printable, thermally conductive polysiloxane composites for thermal interface devices
16. 3d printing of hydrogel nanocomposites: a symbiotic union for advanced biomedical applications10.1016/j.cis.2025.103602 ↗
17. Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3d printing technique10.1016/j.msec.2014.01.027 ↗
18. Additively manufactured metallic biomaterials
19. 3d-Printed liquid metal polymer composites as nir-responsive 4d printing soft robot10.1038/s41467-023-43667-4 ↗
20. Coaxial multi-material photocurable 3d printing of water retaining and anti-swelling hydrogel sensors for reliable air/underwater applications
21. Optimizing the separation process for improved Zirconia molding through liquid crystal display 3d printing10.1016/j.ceramint.2024.08.110 ↗
22. Mechanically Robust, transparent, conductive hydrogels based on hydrogen bonding, ionic coordination interactions and electrostatic interactions for light-curing 3d printing10.1016/j.cej.2024.150289 ↗
23. Photocuring 3d printable flexible strain sensor enhanced by in situ grown silk fibroin nanoparticles10.1016/j.cej.2024.154762 ↗
24. Multiphoton lithography of organic semiconductor devices for 3d printing of flexible electronic circuits, biosensors, and bioelectronics
25. Uv-Curable photosensitive silicone resins based on a novel polymerizable photoinitiator and Go-Modified Tio2 nanoparticles10.1016/j.compositesb.2017.12.006 ↗
26. Experimental study of photopolymer resin composition for aln ceramic 3d printing via digital light processing10.3390/polym17172344 ↗
27. Progress in photocurable 3d printing of photosensitive polyurethane: a review10.1002/marc.202300211 ↗
28. Simulation of Uv curing of photosensitive resins with phase change materials10.1016/j.est.2024.113373 ↗
29. Uv-Curing 3d printing of high-performance, recyclable, biobased photosensitive resin enabled by dual-crosslinking networks
30. Thiol‐terminated hyperbranched polymer for dlp 3d printing: performance evaluation of a low shrinkage photosensitive resin
31. Waste nitrile rubber powders enabling tougher 3d printing photosensitive resin composite10.1016/j.polymer.2022.124609 ↗
32. Uv-curable, 3d printable and biocompatible silicone elastomers10.1016/j.porgcoat.2019.105372 ↗
33. Dynamic borate ester bond-based 3d printing fluorescence polysiloxane with self-healing, antimicrobial, and shape memory10.1016/j.cej.2024.149850 ↗
34. Modification of the mechanical properties of photosensitive resin by using biobased fillers during stereolithography (Sla) 3d printing10.3390/ma18122699 ↗
35. Development of photosensitive natural rubber as a mechanical modifier for ultraviolet-curable resin applied in digital light processing-based three-dimensional printing technology10.1021/acsomega.1c00418 ↗
36. Effects of silanized Nano-Al2o3 fillers on the mechanical properties and printing accuracy of photopolymer resins for 3d printing dental applications10.1088/2053-1591/adf709 ↗
37. Multifunctional linear polyphosphazene with reactive side groups: achieving fire resistance and low dielectric bismaleimide10.1016/j.compositesb.2025.112254 ↗
38. A tailorable series of Elastomeric‐to‐Rigid, selfhealable, shape memory bismaleimide
39. Phosphononitrile based bismaleimide electronic packaging substrate with both fire safety and dielectric properties: assisting 5g communication10.1016/j.compositesb.2024.111489 ↗
40. Design of reactive linear polyphosphazene to improve the dielectric properties and fire safety of bismaleimide composites10.1016/j.cej.2024.148867 ↗
41. Biomass modifiers for low dielectric bismaleimides at high-frequency10.1021/acsapm.3c00528 ↗
42. Flexible bismaleimide resins based on bio‐based diamine: synthesis and properties10.1002/app.55872 ↗
43. Thermal conductivity and dielectric properties of Bismaleimide/Cyanate ester copolymer10.1049/hve.2017.0056 ↗
44. Mof-derived strategy to obtain cucoox functionalized Ho-Bn: a novel design to enhance the toughness, fire safety and heat resistance of bismaleimide resin10.1016/j.cej.2021.134013 ↗
45. Bismaleimide with high thermal stability, toughness and flame retardancy modified by synergistic hyperbranched flame retardant10.1016/j.cej.2024.149396 ↗
46. Novel photosensitive resin simultaneously with outstanding cryogenic strength and toughness for digital light processing three-dimensional printing
47. Polymer-modified cement-based coating containing organic-inorganic silicons modified polyacrylate emulsion: performance and mechanisms10.1016/j.conbuildmat.2024.135607 ↗
48. Low viscosity and highly flexible Stereolithographic 3d printing resins for flexible sensors10.1016/j.matdes.2024.113052 ↗
49. Exceptional mechanical properties and heat resistance of photocurable bismaleimide ink for 3d printing10.3390/ma14071708 ↗
50. Linking microscopic network structure to macroscopic rheological properties in polydimethylsiloxane composite fluids10.1016/j.compscitech.2025.111193 ↗
51. Rheology of lightly-cured polydimethylsiloxane liquid blends10.1016/j.eurpolymj.2019.05.011 ↗
52. Siloxane-modified waterborne Uv-Curable polyurethane acrylate coatings: chemorheology and viscoelastic analyses10.1016/j.porgcoat.2021.106323 ↗
53. New chain-extended bismaleimides with aryl-ether-imide and phthalide cardo Skeleton (I): synthesis, characterization and properties10.1016/j.reactfunctpolym.2017.12.017 ↗
54. Corrosion resistance of alkoxysilane modified bisphenol a-Epoxide coatings10.1016/j.porgcoat.2019.05.006 ↗
55. Aminosilane-Co-Graphene Oxide/Epoxy nanocomposite coating: an approach towards toughness and viscoelastic properties enhancement10.1016/j.porgcoat.2020.106050 ↗
56. Influence of anchoring segments on methacrylate-based comb-type hydrophilic polymer segments coated on Silica surfaces using the Grafting-to method10.1016/j.colcom.2020.100258 ↗
57. Improved heat resistance and electrical properties of epoxy resins by introduction of bismaleimide10.1007/s11664-022-10017-x ↗
58. Bio-based epoxy resin demonstrating high breakdown strength and low dielectric loss via intrinsic molecular charge traps construction10.1016/j.compositesb.2024.111728 ↗