journal article·2004-03

High-Velocity and Quasi-Static Impact of Large Sandwich Panels

P. H. Bull, S. Hallstrom

Publisher page

Abstract

An investigation of the response of sandwich structures subjected to impact velocities of virtually 0 m/s and approximately 1000 m/s is conducted. The higher velocity exceeds both the longitudinal and the transverse wave propagation velocities of the core material in the sandwich panels. The objective is to investigate the possibility to simulate the damage from ballistic impact of sandwich panels through quasi-static experiments. Panels are impacted using a 40mm Bofors AA gun and, using a similar projectile, other panels are indented quasi-statically. Energy absorption is measured in both test series. After impact, the panels are tested in in-plane compression together with one undamaged panel for reference. Residual strength of impacted panels is analyzed by finite element analysis. It is shown that the damage from high-velocity impact is limited, and it is possible to regain most of the undamaged strength by repair.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Transportation Safety and Impact Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Aeronautics, Royal Institute of Technology, S-100 44 Stockholm, Sweden

References (8)

Show source-provided references
1. 10.4028/www.scientific.net/KEM.141-143.50110.4028/www.scientific.net/KEM.141-143.501 ↗
2. 2. Li, X. and Carlsson, L.A. (1998). Mechanical Properties of Glass/Vinylester Face Laminates for Sandwich Plates, Technical Report, Department of Mechanical Engineering, Florida Atlantic University, Boca Raton, USA .
3. 3. Bull, P.H. (1998). Core Joints in Sandwich Beams, Technical Report, Department of Aeronautics, Royal Institute of Technology, Stockholm, Sweden .
4. 4. (1995). Technical Manual HGrade. DIAB, Laholm, Sweden .
5. 5. Zenkert, D. (1995). An Introduction to Sandwich Construction, Engineering Materials Advisory Services, London, UK .
6. 6. Timoshenko, S.P. and Woinowsky-Krieger, S. (1959). Theory of Plates and Shells, McGraw-Hill International Editions, New York, USA .
7. 10.2514/8.1124610.2514/8.11246 ↗
8. 10.1177/00219983980320110210.1177/002199839803201102 ↗