journal article·2021-09

Crushable multiaxial behavior of sandwich foam cores: Pressure vessel experiments

Michelle S Hoo Fatt, Chong Zhong, Prasanna C Gadepalli, Xiaolong Tong

Publisher page

Abstract

The objective of this study was to characterize the multiaxial, elastic-plastic and hysteresis behavior of Divinycell PVC H100 foam using a novel pressure vessel experiment. Cyclic, elastic and post-yield behavior of the foam under uniaxial compression and tension, shear, biaxial compression and shear, triaxial compression, triaxial compression-tension and triaxial compression and shear were obtained in both out-of-plane and in-plane directions of the foam. In all the above-mentioned modes, the foam exhibited elastic-plastic response followed by damage and viscoelastic hysteresis. The Tsai–Wu failure criterion was found to be superior in predicting yielding under triaxial stress states among all the anisotropic yield criteria considered. Based on the experimental results, an elastic-plastic, viscoelastic damage model was developed and used to obtain transversely isotropic, plastic strain hardening behavior as well as viscoelastic and damage properties associated with post-yield hysteresis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer composites and self-healing · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, The University of Akron, Akron, OH, USA

Funding

Office of Naval Research

References (33)

Show source-provided references
1. 10.1007/978-981-10-7170-610.1007/978-981-10-7170-6 ↗
2. 10.1016/j.marstruc.2017.08.00410.1016/j.marstruc.2017.08.004 ↗
3. 10.1016/j.engstruct.2015.06.05410.1016/j.engstruct.2015.06.054 ↗
4. 10.1016/S1359-835X(01)00110-510.1016/S1359-835X(01)00110-5 ↗
5. 10.1007/s10853-013-7483-610.1007/s10853-013-7483-6 ↗
6. 10.1177/0021955X1453765910.1177/0021955X14537659 ↗
7. Hoo Fatt MS · 2017
8. 10.1016/j.compositesa.2011.11.01010.1016/j.compositesa.2011.11.010 ↗
9. Lindholm CJ, Jones J and Olsson D. Dynamic and quasi static testing of interpenetrating polymer network (IPN) foam cores. Presented at the international symposium on dynamic response and failure of composite materials , Island of Ischia, Italy, September 6–9, 2016.
10. 10.1016/S1359-6454(01)00058-110.1016/S1359-6454(01)00058-1 ↗
11. 10.1016/j.ijmecsci.2004.11.01010.1016/j.ijmecsci.2004.11.010 ↗
12. 10.1016/j.jmps.2014.10.00910.1016/j.jmps.2014.10.009 ↗
13. 10.1016/j.ijimpeng.2008.11.01010.1016/j.ijimpeng.2008.11.010 ↗
14. 10.1016/S0020-7683(99)00277-210.1016/S0020-7683(99)00277-2 ↗
15. 10.1016/S0020-7403(89)80002-510.1016/S0020-7403(89)80002-5 ↗
16. 10.1520/JTE11535J10.1520/JTE11535J ↗
17. 10.1016/0020-7403(66)90019-110.1016/0020-7403(66)90019-1 ↗
18. 10.1115/1.154624210.1115/1.1546242 ↗
19. Prochaska M. · 2016
20. 10.1007/s11340-015-0009-110.1007/s11340-015-0009-1 ↗
21. 10.1111/str.1222610.1111/str.12226 ↗
22. Bouguet JY. Camera Calibration Toolbox for Matlab, www.vision.caltech.edu/bouguetj/calib_doc/index.html (2013, accessed 18 February 2020).
23. Zhong C. Pressure chamber experiments to determine triaxial material properties of polymer foams . PhD Dissertation, The University of Akron, Akron, OH, USA, 2019.
24. 10.1098/rspa.1948.004510.1098/rspa.1948.0045 ↗
25. 10.1177/00219983670010021010.1177/002199836700100210 ↗
26. Lubliner J. · 1990
27. 10.1177/00219983710050010610.1177/002199837100500106 ↗
28. 10.1007/BF0075490010.1007/BF00754900 ↗
29. 10.1177/07316844840030010210.1177/073168448400300102 ↗
30. 10.1016/j.compositesa.2017.08.00710.1016/j.compositesa.2017.08.007 ↗
31. 10.1016/j.compscitech.2019.01.00810.1016/j.compscitech.2019.01.008 ↗
32. 10.1016/j.compositesb.2018.12.04310.1016/j.compositesb.2018.12.043 ↗
33. 10.1016/j.compstruct.2018.09.09310.1016/j.compstruct.2018.09.093 ↗