Mechanical performance of marine sandwich composites subjected to flatwise compression and flexural loading: Effect of resin pins
Source abstract
Abstract
Mechanical performance of marine sandwich panels comprising E-glass/vinyl ester face sheets and perforated poly-vinyl chloride foam core was evaluated and compared with conventional foam core sandwich panels. Circular holes through the foam core thickness were drilled with 12 different arrangements in square patterns and the holes were filled with the resin during the infusion process which created the through-the-thickness solid resin pins. The effect of each pattern on the flatwise compression and core shear properties of the sandwich panels were experimentally investigated. The three-point bending maximum failure load of perforated foam core sandwich panels was increased over 133.8% by increasing the diameter of the resin pins at the expense of increased panel weight up to 67%. The flatwise compression stress to induce core crushing was significantly increased by reinforcing the resin pins.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Polymer composites and self-healing · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Balıkesir University, Balıkesir, Turkey
Department of Mechanical Engineering, Ankara Yıldırım Beyazıt University, Ankara, Turkey
Department of Energy Systems Engineering, Manisa Celal Bayar University, Manisa, Turkey
References (36)
Show source-provided references
1. 10.1115/1.309729510.1115/1.3097295 ↗
2. ASTM C274-99. ASTM standard terminology of structural sandwich constructions.
3. 10.1106/10567890202724710.1106/105678902027247 ↗
4. 10.1177/089270570301600400510.1177/0892705703016004005 ↗
5. 10.1016/S1359-835X(96)00098-X10.1016/S1359-835X(96)00098-X ↗
6. 10.1016/S0263-8223(03)00040-010.1016/S0263-8223(03)00040-0 ↗
7. 10.1177/109963620606257010.1177/1099636206062570 ↗
8. Petrescue L, Hubert P, Gordon Set al. Characterization of defects in low-cost resin-infused aeronautical structures. In: The 5th Canadian international composites conference (CICC) , University of Delaware, Newark, USA, 7–9 July 2004, pp.491–495.
9. 10.1016/S1359-835X(97)00057-210.1016/S1359-835X(97)00057-2 ↗
10. 10.1016/j.compscitech.2005.09.00510.1016/j.compscitech.2005.09.005 ↗
11. 10.1016/j.compositesb.2014.07.00610.1016/j.compositesb.2014.07.006 ↗
12. 10.1016/j.compositesb.2017.05.05210.1016/j.compositesb.2017.05.052 ↗
13. 10.1016/j.compositesa.2007.08.01610.1016/j.compositesa.2007.08.016 ↗
14. 10.1007/s10853-006-0114-810.1007/s10853-006-0114-8 ↗
15. 10.1016/j.compositesa.2011.07.02010.1016/j.compositesa.2011.07.020 ↗
16. 10.1016/j.compositesb.2012.02.01710.1016/j.compositesb.2012.02.017 ↗
17. 10.1016/j.compstruct.2009.10.00510.1016/j.compstruct.2009.10.005 ↗
18. 10.1177/002199831350358810.1177/0021998313503588 ↗
19. 10.1016/j.compositesb.2011.11.03910.1016/j.compositesb.2011.11.039 ↗
20. 10.1177/109963621037976910.1177/1099636210379769 ↗
21. 10.1177/002199831245176310.1177/0021998312451763 ↗
22. 10.1016/j.ijmecsci.2014.08.00410.1016/j.ijmecsci.2014.08.004 ↗
23. 10.1002/pc.2321810.1002/pc.23218 ↗
24. 10.1016/j.compositesb.2015.04.05510.1016/j.compositesb.2015.04.055 ↗
25. 10.1177/109963621665081910.1177/1099636216650819 ↗
26. 10.1016/j.matdes.2011.09.03710.1016/j.matdes.2011.09.037 ↗
27. 10.1177/109963621771000310.1177/1099636217710003 ↗
28. International Standard, ISO 14125. Fibre-reinforced plastic composites – determination of flexural properties.
29. International Standard. Plastics – ISO 527-1-determination of tensile properties – part 1: general principles.
30. ASTM D6641/D6641M. Standard test method for compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture.
31. ASTM D7078/D7078M. Standard test method for shear properties of composite materials by V-notched rail shear method.
32. ASTM C393/C393M-16. Standard test method for core shear properties of sandwich constructions by beam flexure.
33. 10.1016/j.matdes.2012.06.02310.1016/j.matdes.2012.06.023 ↗
34. ASTM C365/C365M-05. Standard test method for flatwise compressive properties of sandwich cores.
35. 10.1016/j.matdes.2009.06.03910.1016/j.matdes.2009.06.039 ↗
36. 10.1016/j.compstruct.2012.12.01010.1016/j.compstruct.2012.12.010 ↗