journal article·2024-02-28Open access

Chitosan-Caffeic Acid Antibacterial Coating for PDMS Surfaces: A Sustained Moxifloxacin Release and Prolonged Coating Adhesion

Felipe Veloso, Pascale Chevallier, Helton José Wiggers, Francesco Copes, Bernard Drouin, Diego Mantovani

Coatings· Volume 14· Issue 3

Abstract

Central venous catheters (CVCs) are largely used to administer chemotherapy, hemodialysis, and other treatments. Mostly made of polydimethylsiloxane (PDMS), these medical devices present an intrinsic risk of infection due to the possible formation of biofilm, thus increasing the risk of complications. Drug-releasing polymer coatings are a well-recognized strategy for combating biofilm formation. However, adhesion of the coating to the substrate over time is a major challenge. Therefore, this work aimed to design a chitosan-based coating designed to have maximum adhesion and stability to guarantee sustained drug release and antibacterial properties for at least 14 days. A coating composed of chitosan (CS) as a drug carrier, caffeic acid (CA) and copper sulphate (Cu) as crosslinkers, and moxifloxacin (Mox) as an antibiotic, was deposited through a controlled casting process onto functionalized PDMS surface. PDMS surface modification was investigated by X-ray photoelectron spectroscopy (XPS), and Fourier-transfer infrared (FTIR). Antibiotic release over time was measured in pseudo-physiological conditions (pH 7.4 and at 37 °C). Indirect cytotoxicity assays were performed on human dermal fibroblasts (HDF). The adhesion of the as-designed coating was evaluated by a specially designed pull-off test, before and after aging for 14 days in PBS. XPS and FTIR analyses confirmed the successful PDMS surface modification. The CS-CA-Cu-Mox coating resulted in being non-cytotoxic towards HDF and exhibited sustained moxifloxacin release for up to 49 days. Furthermore, the CS-CA and CS-CA-Cu coatings presented antibacterial activity for 21 days against E. coli, and for 14 days against S. aureus. Importantly, the coating maintained stable adhesion after 14 days in pseudo-physiological conditions. This study provides new insights into the adhesion behavior of polymeric coatings for medical devices, which is rarely reported in the literature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Transdermal Drug Delivery · Contact Dermatitis and Allergies · Central Venous Catheters and Hemodialysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory for Biomaterials and Bioengineering (LBB-UL), Canada Research Chair Tier I, Department of Min-Met-Materials Engineering and CHU de Quebec Research Center, Division Regenerative Medicine, Laval University, Quebec, QC G1V 0A6, Canada

Laboratory for Biomaterials and Bioengineering (LBB-BPK), Associação de Ensino, Pesquisa e Extensão BIOPARK, Toledo 85919-899, Brazil

Funding

Parque Científico e Tecnológico de Biociências BIOPARK, Prati–Donaduzzi Farmacêutica Co. · Natural Science and Engineering Research Council of Canada · Quebec Ministry of Economy and Innovation

References (56)

Show source-provided references
1. Healthcare—Associated infections: A public health problem10.4103/0300-1652.103543 ↗
2. Public Health Agency of Canada (2013). Report on the State of Public Health in Canada 2013, Public Health Agency of Canada.
3. Estimating the Proportion of Healthcare-Associated Infections that Are Reasonably Preventable and the Related Mortality and Costs10.1086/657912 ↗
4. Impact of catheter-related bloodstream infections on the mortality of critically ill patients: A meta-analysis10.1097/CCM.0b013e3181a02a67 ↗
5. Antimicrobial lock therapy in central-line associated bloodstream infections: A systematic review10.1007/s15010-015-0738-1 ↗
6. Current strategies for the prevention and management of central line-associated bloodstream infections10.2147/IDR.S10105 ↗
7. Device-associated infection rates in 398 intensive care units in Shanghai, China: International Nosocomial Infection Control Consortium (INICC) findings10.1016/j.ijid.2011.06.009 ↗
8. Antibacterial Coatings: Challenges, Perspectives, and Opportunities10.1016/j.tibtech.2015.09.002 ↗
9. Alasvand, N., Urbanska, A.M., Rahmati, M., Saeidifar, M., Gungor-Ozkerim, P.S., Sefat, F., Rajadas, J., and Mozafari, M. (2017). Therapeutic Nanoparticles for Targeted Delivery of Anticancer Drugs, Elsevier Inc.. No. 2011.10.1016/B978-0-323-52725-5.00013-7 ↗
10. Chitin and chitosan production from shrimp shells using ammonium-based ionic liquids10.1016/j.ijbiomac.2019.03.018 ↗
11. Chelu, M., and Musuc, A.M. (2023). Advanced Biomedical Applications of Multifunctional Natural and Synthetic Biomaterials. Processes, 11.10.3390/pr11092696 ↗
12. Development and pharmacological evaluation of vancomycin loaded chitosan films10.1016/j.carbpol.2020.117565 ↗
13. Venkatesan, J., Anil, S., Kim, S.K., and Shim, M.S. (2017). Chitosan as a Vehicle for Growth Factor Delivery: Various Preparations and Their Applications in Bone Tissue Regeneration, Elsevier B.V.10.1016/j.ijbiomac.2017.01.072 ↗
14. Optimization of Swelling, Drug Loading and Release from Natural Polymer Hydrogels10.1088/1757-899X/454/1/012017 ↗
15. Quercetin-Crosslinked Chitosan Films for Controlled Release of Antimicrobial Drugs10.3389/fbioe.2022.814162 ↗
16. Polyphenols as a versatile component in tissue engineering10.1016/j.actbio.2020.11.004 ↗
17. An approach towards the quantitative structure-activity relationships of caffeic acid and its derivatives10.1002/cbic.200400094 ↗
18. Caffeic acid production enhancement by engineering a phenylalanine over-producing Escherichia coli strain10.1002/bit.24988 ↗
19. Food-Grade Covalent Complexes and Their Application as Nutraceutical Delivery Systems: A Review10.1111/1541-4337.12229 ↗
20. The Cross-Linking Mechanism and Applications of Catechol–Metal Polymer Materials10.1002/admi.202100239 ↗
21. Synthesis and Characterization of New Schiff Base Transition Metal Complexes Derived from Drug Together with Biological Potential Study10.4172/2155-9619.1000310 ↗
22. Hooper, D.C. (2023, October 15). Mechanisms of Action of Antimicrobials: Focus on Fluoroquinolones Inhibition of Cell Wall Synthesis. Available online: https://academic.oup.com/cid/article/32/Supplement_1/S9/298541.10.1086/319370 ↗
23. Kaliyathan, A.V., Mathew, A., Rane, A.V., Kanny, K., and Thomas, S. (2018). Natural Rubber and Silicone Rubber-Based Biomaterials, Elsevier Ltd.10.1016/B978-0-08-102194-1.00004-9 ↗
24. Surface modification of poly(dimethylsiloxane) and its applications in microfluidics-based biological analysis10.1515/revac-2012-0016 ↗
25. Quantitative studies on PDMS-PDMS interface bonding with piranha solution and its swelling effect10.3390/mi3020427 ↗
26. Bhatt, P., Kumar, V., Subramaniyan, V., Nagarajan, K., Sekar, M., Chinni, S.V., and Ramachawolran, G. (2023). Plasma Modification Techniques for Natural Polymer-Based Drug Delivery Systems. Pharmaceutics, 15.10.3390/pharmaceutics15082066 ↗
27. Robust and versatile pectin-based drug delivery systems10.1016/j.ijpharm.2014.12.045 ↗
28. Mussel-inspired polydopamine for bio-surface functionalization10.1016/j.bsbt.2016.11.001 ↗
29. Adhesion Properties of Self-Polymerized Dopamine Thin Film10.2174/1876531901103010115 ↗
30. Mussel-inspired surface chemistry for multifunctional coatings10.1126/science.1147241 ↗
31. Electrophoretic deposition of vancomycin loaded halloysite nanotubes-chitosan nanocomposite coatings10.1016/j.surfcoat.2018.05.070 ↗
32. Development of biobased multilayer films with improved compatibility between polylactic acid-chitosan as a function of transition coating of SiOx10.1016/j.ijbiomac.2020.10.001 ↗
33. Chevallier, P., Wiggers, H.J., Copes, F., Bueno, C.Z., and Mantovani, D. (2023). Prolonged Antibacterial Activity in Tannic Acid–Iron Complexed Chitosan Films for Medical Device Applications. Nanomaterials, 13.10.3390/nano13030484 ↗
34. Sink conditions do not guarantee the absence of saturation effects10.1016/j.ijpharm.2019.119009 ↗
35. Spectrofluorimetric determination of moxifloxacin in tablets, human urine and serum10.1039/b005991i ↗
36. (2016). Paints and Varnishes Pull-Off Test for Adhesion (Standard No. ISO 4624:2016).
37. (2009). Biological Evaluation of Medical Devices Part 5: Tests for In Vitro Cytotoxicity (Standard No. ISO 10993-5:2009).
38. Nourmohammadi, J., Hajibabaei, T., Amoabediny, G., and Jafari, S.H. (2023, October 15). Aminosilane Layer Formation Inside the PDMS Tubes Improves Wettability and Cytocompatibility of Human Endothelial Cells the Preparation and Characterization of Nanofibrous Scaffold for Endothelial Progenitor Cell Expansion View Project. Available online: https://www.researchgate.net/publication/278753721.
39. Lu, M., Ding, L., Zhong, T., and Dai, Z. (2023). Improving Hydrophilicity and Adhesion of PDMS through Dopamine Modification Assisted by Carbon Dioxide Plasma. Coatings, 13.10.3390/coatings13010126 ↗
40. Razaviamri, S., Wang, K., Liu, B., and Lee, B.P. (2021). Catechol-based antimicrobial polymers. Molecules, 26.10.3390/molecules26030559 ↗
41. Silvestre, J., Delattre, C., Michaud, P., and de Baynast, H. (2021). Optimization of chitosan properties with the aim of a water resistant adhesive development. Polymers, 13.10.3390/polym13224031 ↗
42. Physical properties and antioxidant activity of an active film from chitosan incorporated with green tea extract10.1016/j.foodhyd.2010.04.003 ↗
43. Daniyal, W.M.E.M.M., Fen, Y.W., Saleviter, S., Chanlek, N., Nakajima, H., Abdullah, J., and Yusof, N.A. (2021). X-ray photoelectron spectroscopy analysis of chitosan–graphene oxide-based composite thin films for potential optical sensing applications. Polymers, 13.10.3390/polym13030478 ↗
44. Fabrication and Characterization of Chitosan Nanoparticle-Incorporated Quaternized Poly(Vinyl Alcohol) Composite Membranes as Solid Electrolytes for Direct Methanol Alkaline Fuel Cells10.1016/j.electacta.2015.11.117 ↗
45. Role of the OH and NH vibrational groups in polysaccharide-nanocomposite interactions: A FTIR-ATR study on chitosan and chitosan/clay films10.1016/j.polymer.2016.07.086 ↗
46. FTIR and TGA studies of chitosan composite films
47. Infrared Spectroscopy in the Middle Frequency Range for Various Imidazolium Ionic Liquids—Common Spectroscopic Characteristics of Vibrational Modes with In-Plane +C(2)-H and +C(4,5)-H Bending Motions and Peak Splitting Behavior Due to Local Symmetry Breaking of Vibrational Modes of the Tetrafluoroborate Anion10.1021/acsomega.0c05769 ↗
48. Phenomenology of the Initial Burst Release of Drugs from PLGA Microparticles10.1021/acsbiomaterials.0c01228 ↗
49. Effects of crosslinking on the mechanical properties, drug release and cytocompatibility of protein polymers10.1016/j.actbio.2013.08.029 ↗
50. Copper-assisted oxidation of catechols into quinone derivatives10.1039/D0SC04883F ↗
51. Drug-release dynamics and antibacterial activities of chitosan/cefazolin coatings on Ti implants10.1016/j.porgcoat.2021.106385 ↗
52. Drug Delivery from PCL/Chitosan Multilayer Coatings for Metallic Implants10.1021/acsomega.2c00504 ↗
53. Biofunctional catheter coatings based on chitosan-fatty acids derivatives10.1016/j.carbpol.2019.115263 ↗
54. Preparation of highly effective antibacterial coating with polydopamine/chitosan/silver nanoparticles via simple immersion10.1016/j.porgcoat.2020.105967 ↗
55. Titanium coating: Introducing an antibacterial and bioactive chitosan-alginate film on titanium by spin coating
56. Balanced adhesion and cohesion of chitosan matrices by conjugation and oxidation of catechol for high-performance surgical adhesives10.1016/j.carbpol.2020.116760 ↗