Effect of Zinc Content on Powder Characteristics, Porosity, Microstructure, and Corrosion Behavior of SLM-Printed Mg-xZn-0.2Mn Alloys for Biomedical Applications
Source abstract
Abstract
This study investigated the effects of Zinc (Zn) content, specifically in the range of 1 wt.% to 7 wt.%, on the powder characteristics, porosity, microstructure, and corrosion behavior of Mg-xZn-0.2Mn alloys produced using selective laser melting (SLM). To evaluate the porosity of the printed parts and various powder attributes, such as size, circularity, void spaces between powders, and inherent imperfections, scanning electron microscopy (SEM) and optical microscopy (OM) were employed. The alloy microstructure, composition, and phase were examined using energy dispersive X-ray (SEM-EDX) and X-ray Diffraction (XRD). The corrosion resistance and degradation behavior were assessed through electrochemical corrosion tests and immersion tests in Hanks’ solution at 37.5 °C, respectively. Finally, OM and SEM-EDX were used to characterize the corrosion products. The findings of this study indicated that the powder size increased with Zn content, maintaining a 0.8 circularity. Powder defects were minimal, with occasional satellite particles. For the SLM-printed samples, it was evident that porosity characteristics could be influenced by Zn content. As Zn content increased, the pore fraction rose from 1.0% to 5.3%, and the pore size grew from 2.2 μm to 3.0 μm. All printed samples consisted of an α-Mg matrix. Additionally, a higher Zn content resulted in more distinct grain boundaries. Corrosion resistance decreased with Zn, leading to more pronounced localized corrosion after immersion in Hanks’ solution. Ca-P was found as white corrosion products on all samples.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Industrial and Systems Engineering, The Hong Kong Polytechnic University, Hong Kong, China
School of Mechanical and Aerospace Engineering, Queen’s University, Belfast BT9 5AH, UK
School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110870, China
Funding
Research Grants Council of the Hong Kong Special Administrative Region
References (61)
Show source-provided references
1. High nitrogen stainless steel drug-eluting stent—Assessment of pharmacokinetics and preclinical safety in vivo
2. Selective laser manufacturing of Ti-based alloy and composites: Impact of process parameters, application trends, and future prospects10.1016/j.mtadv.2020.100097 ↗
3. Controllable water behaviors on V-shape micro-grooved titanium alloy surfaces depending on the depth-to-width aspect ratio10.1016/j.mtphys.2021.100461 ↗
4. Magnesium alloys for temporary implants in osteosynthesis: In vivo studies of their degradation and interaction with bone10.1016/j.actbio.2011.11.008 ↗
5. Characterization and corrosion resistance of a composite layered double hydroxides film on Mg–4Zn alloy in Hank’s solution10.1016/j.mtphys.2021.100474 ↗
6. Influence of stamping on the biodegradation behavior of Mg–2Zn-0.5Nd (ZN20) sheet
7. Formation of nanostructures on magnesium alloy by anodization for potential biomedical applications10.1016/j.mtcomm.2020.101403 ↗
8. Research on microstructures of sub-rapidly solidified AZ61 Magnesium Alloy10.1016/j.matchar.2008.12.004 ↗
9. The formability and microstructure evolution of 24CrNiMo alloy steel fabricated by selective laser melting10.1016/j.vacuum.2020.109297 ↗
10. Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging10.1016/j.mtadv.2019.01.001 ↗
11. Comparison of corrosion resistance and biocompatibility of magnesium phosphate (MgP), zinc phosphate (ZnP) and calcium phosphate (CaP) conversion coatings on Mg alloy10.1016/j.surfcoat.2020.125919 ↗
12. Impact of microalloying element Ga on the glass-forming ability (GFA), mechanical properties and corrosion behavior of Mg–Zn–Ca bulk metallic glass10.1016/j.matchemphys.2020.123555 ↗
13. Ni, J., Ling, H., Zhang, S., Wang, Z., Peng, Z., Benyshek, C., Zan, R., Miri, A.K., Li, Z., and Zhang, X. (2019). Three-dimensional printing of metals for biomedical applications. Mater. Today Bio, 3.10.1016/j.mtbio.2019.100024 ↗
14. Additively manufactured biodegradable porous magnesium10.1016/j.actbio.2017.12.008 ↗
15. Improving the mechanical and corrosion properties of pure magnesium by parts-per-million-level alloying10.1016/j.actamat.2022.118393 ↗
16. Corrosion fatigue behaviors of two biomedical Mg alloys—AZ91D and WE43—In simulated body fluid10.1016/j.actbio.2010.07.026 ↗
17. Microstructure and mechanical properties of selective laser melted Mg-9 wt%Al powder mixture10.1016/j.matlet.2018.03.068 ↗
18. Biodegradation mechanisms of selective laser-melted Mg–xAl–Zn alloy: Grain size and intermetallic phase10.1080/17452759.2017.1408918 ↗
19. Microstructure and mechanical properties of laser melting deposited GW103K Mg-RE alloy10.1016/j.msea.2017.01.084 ↗
20. Recent research and development in titanium alloys for biomedical applications and healthcare goods10.1016/j.stam.2003.09.002 ↗
21. Exposure, Metabolism, and Toxicity of Rare Earths and Related Compounds
22. Control of biodegradation of biocompatable magnesium alloys10.1016/j.corsci.2007.01.001 ↗
23. Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application10.1016/j.msec.2008.08.024 ↗
24. The Corrosion Performance and Mechanical Properties of Mg-Zn Based Alloys—A Review10.3390/cmd1010007 ↗
25. Nopová, K., Jaroš, J., Červinek, O., Pantělejev, L., Gneiger, S., Senck, S., and Koutný, D. (2023). Processing of AZ91D Magnesium Alloy by Laser Powder Bed Fusion. Appl. Sci., 13.10.3390/app13031377 ↗
26. Additive manufacturing of ZK60 magnesium alloy by selective laser melting: Parameter optimization, microstructure and biodegradability10.1016/j.mtcomm.2020.101922 ↗
27. Eskandari Sabzi, H., and Rivera-Díaz-del-Castillo, P.E.J. (2019). Defect Prevention in Selective Laser Melting Components: Compositional and Process Effects. Materials, 12.10.3390/ma12223791 ↗
28. A Threshold Selection Method from Gray-Level Histograms10.1109/TSMC.1979.4310076 ↗
29. Selective laser melting of Mg-Zn binary alloys: Effects of Zn content on densification behavior, microstructure, and mechanical property10.1016/j.msea.2019.04.067 ↗
30. Effects of Zn on microstructure, mechanical properties and corrosion behavior of Mg–Zn alloys10.1016/j.msec.2012.07.042 ↗
31. An investigation of the effect of powder flowability on the powder spreading in additive manufacturing10.1016/j.powtec.2022.117997 ↗
32. Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy
33. Quantification of porosity and surface roughness in laboratory measurements of the bidirectional reflectance of asteroid surface analogues10.1186/BF03351807 ↗
34. Effects of porosity on the mechanical properties of additively manufactured components: A critical review10.1088/2053-1591/abcc5d ↗
35. Influence of porosity on mechanical and corrosion properties of SLM 316L stainless steel10.1007/s00339-021-05191-4 ↗
36. Ziri, S., Hor, A., and Mabru, C. (2021, January 14–16). Effect of powder size and processing parameters on surface, density and mechanical properties of 316L elaborated by Laser Powder Bed Fusion. Proceedings of the 24th International Conference on Material Forming, Liège, Belgique.10.25518/esaform21.1563 ↗
37. Combined effect of powder properties and process parameters on the density of 316L stainless steel obtained by laser powder bed fusion10.1007/s00170-022-09160-w ↗
38. The effect of energy density and porosity structure on tensile properties of 316L stainless steel produced by laser powder bed fusion10.1007/s40964-022-00281-y ↗
39. CoCr alloy processed by Selective Laser Melting (SLM): Effect of Laser Energy Density on microstructure, surface morphology, and hardness10.1016/j.jmapro.2020.01.052 ↗
40. Powder spreading over realistic laser melted surfaces in metal additive manufacturing10.1016/j.addlet.2022.100039 ↗
41. Influences of powder morphology and spreading parameters on the powder bed topography uniformity in powder bed fusion metal additive manufacturing
42. Influence of element vaporization on formability, composition, microstructure, and mechanical performance of the selective laser melted Mg–Zn–Zr components10.1016/j.matlet.2015.05.074 ↗
43. Thermodynamic and surface properties of liquid Mg–Zn alloys10.1016/S0925-8388(01)01684-X ↗
44. Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al-Mn-Sc alloy fabricated by selective laser melting10.1016/j.actamat.2020.04.015 ↗
45. Surface design of Mg-Zn alloy temporary orthopaedic implants: Tailoring wettability and biodegradability using laser surface melting10.1016/j.surfcoat.2018.05.017 ↗
46. A comparison of the corrosion behaviour of copper materials in dilute nitric acid10.1016/j.corsci.2021.109778 ↗
47. Pan, H., He, Y., and Zhang, X. (2021). Interactions between Dislocations and Boundaries during Deformation. Materials, 14.10.3390/ma14041012 ↗
48. A simple model for grain refinement during solidification10.1016/0001-6160(75)90188-1 ↗
49. The role of solute in grain refinement of magnesium10.1007/BF02830349 ↗
50. Effect of Mn addition on grain refinement of biodegradable Mg4Zn0.5Ca alloy10.1016/j.jallcom.2016.03.182 ↗
51. The influence of pH on the corrosion rate of high-purity Mg, AZ91 and ZE41 in bicarbonate buffered Hanks’ solution10.1016/j.corsci.2015.09.018 ↗
52. Wang, Z.-X., Chen, G.-Q., Chen, L.-Y., Xu, L., and Lu, S. (2018). Degradation Behavior of Micro-Arc Oxidized ZK60 Magnesium Alloy in a Simulated Body Fluid. Metals, 8.10.3390/met8090724 ↗
53. HA coating on Mg alloys for biomedical applications: A review10.1016/j.jma.2020.05.003 ↗
54. Effect of pre-compression on microstructural evolution, mechanical property and strengthening mechanism of AZ31 alloy10.1007/s10853-020-04724-1 ↗
55. Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys10.1016/j.corsci.2012.07.015 ↗
56. Zeng, R.C., Yin, Z.Z., Chen, X.B., and Xu, D.K. (2018). Magnesium Alloys—Selected Issue, IntechOpen. Chapter 3.
57. Corrosion of an extruded magnesium alloy ZK60 component—The role of microstructural features10.1016/j.jallcom.2011.01.116 ↗
58. Drevet, R., and Benhayoune, H. (2022). Electrodeposition of Calcium Phosphate Coatings on Metallic Substrates for Bone Implant Applications: A Review. Coatings, 12.10.3390/coatings12040539 ↗
59. Taranu, B.-O., Ianasi, P., Rus, S.F., and Bucur, A.I. (2022). Simultaneous Precipitation and Electrodeposition of Hydroxyapatite Coatings at Different Temperatures on Various Metal Substrates. Coatings, 12.10.3390/coatings12020288 ↗
60. Husak, Y., Solodovnyk, O., Yanovska, A., Kozik, Y., Liubchak, I., Ivchenko, V., Mishchenko, O., Zinchenko, Y., Kuznetsov, V., and Pogorielov, M. (2018). Degradation and In Vivo Response of Hydroxyapatite-Coated Mg Alloy. Coatings, 8.10.3390/coatings8110375 ↗
61. Growth mechanism of hydroxyapatite-coatings formed on pure magnesium and corrosion behavior of the coated magnesium10.1016/j.apsusc.2011.04.087 ↗