Evolution of Surface Integrity Characteristics and Mechanical Behavior of Diamond Burnished and Turned AISI 304 Steel Specimens After Prolonged Exposure to Natural Seawater

This article presents results on the evolution of surface integrity, microstructure, mechanical characteristics, fatigue strength, and wear behavior of AISI 304 steel specimens after prolonged exposure (up to 746 days) to a natural seawater environment, specifically near the port of Varna, Bulgaria. The samples, having different shapes and sizes according to the respective tests, were divided into two main groups based on the finishing process: fine turning (FT) and diamond burnishing (DB). Additionally, fatigue FT specimens were polished to meet the standard requirements. Some of the cylindrical samples from both groups were heat-treated to dissolve the car-bides. No significant improvement in the corrosion resistance of the heat-treated samples (FT and DB) was observed compared with untreated samples after 746 days of immersion in seawater. Overall, all types of DB specimens showed less mass loss (indicating a higher corrosion resistance), higher static and fatigue strength, greater plasticity, and greater wear resistance than the corresponding FT specimens. Notably, pitting corrosion was observed on all specimens, as well as trac-es of intergranular corrosion in some FT specimens. The hardening DB effects have a complex impact on corrosion activity. The increases in dislocation density and the surface and internal energy of the subsurface layers intensify the nucleation of corrosion centers in the surface layers; however, the refined fibrous structure and significant reduction in the roughness slow down the development of corrosion. Therefore, the implementation of DB as a smoothing process will re-duce the surface energy, and hence will lead to further increases in corrosion resistance.