Study of Hot-Dip Aluminium Plating Based on Micro-Morphology and Coating Bond Strength

Hydrogen barrier coatings with Al2O3 as the main component are a good choice for solving the hydrogen embrittlement problem during hydrogen transportation in long-distance pipelines. However, the difference in the coefficients of thermal expansion between the substrate and the Al2O3 coating limits its further utilisation and development. In this study, rare earth oxides were added to the molten aluminium solution, and a Fe-Al transition layer was introduced on the surface of X80 steel by hot-dip plating to solve the thermal mismatch. Here, the microstructure and bonding strength of the hot-dip aluminium layer were investigated. It is found that the hot-dip aluminium coating consists of the outermost aluminium-rich layer and the inner Fe-Al alloy layer, and the microstructure of the two will change with the change in dip plating parameters. The best overall performance of the hot-dip aluminium layer was obtained from X80 steel substrate at a dip plating temperature of 700 °C and a dip plating time of 5 min. This coating has a good interface, moderate thickness, and a bond strength of 49 N. This study provides a reference value for solving the thermal mismatch between the steel substrate and the Al2O3 hydrogen barrier coating generated by subsequent anodising.