Increase in Oxidation Resistance of MAR M-509 via LA-CVD Aluminizing
Source abstract
Abstract
Due to their excellent mechanical properties, Co-based alloys are one of the main candidates to replace Ni-based alloys in high temperature application. Knowledge about oxidation resistance of Co-based alloy MAR M-509 and the extent of its aluminizing on its oxidation resistance is limited. Therefore, in the present study, an aluminide layer was manufactured by low activity chemical vapor deposition (LA-CVD) on MAR M-509. Aluminized and uncoated alloys were investigated in terms of oxidation kinetics and oxidation resistance during isothermal and cyclic oxidation at 1000 and 1100 °C. Material in the as-cast and after exposure was analyzed using scanning electron microscopy (SEM), thermogravimetry (TG) and glow-discharge optical emission spectrometry (GD-OES). Obtained results allowed for elucidating of degradation mechanism including nitridation process of carbides for MAR M-509. It was found that aluminizing of MAR M-509 significantly decreases its oxidation kinetics by the factor of 2.5 and 1.5 at 1000 and 1100 °C respectively. Moreover, the suppression of identified degradation mechanism in case of aluminized alloy was found until occurrence of breakaway oxidation of the aluminide layer. It was also proposed that further increase in oxidation resistance can be successively achieved by an increase in aluminide layer thickness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science, Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Powstanców Warszawy 12, 35-959 Rzeszów, Poland
Funding
National Science Center
References (56)
Show source-provided references
1. Future Directions in the Field of High-Temperature Corrosion Research10.1007/s11085-017-9719-3 ↗
2. Effect of substrate alloy composition on the oxidation behaviour and degradation of aluminide coatings on two Ni base superalloys10.1016/j.corsci.2020.108494 ↗
3. Nowak, W.J., Ochał, K., Wierzba, P., Gancarczyk, K., and Wierzba, B. (2019). Effect of Substrate Roughness on Oxidation Resistance of an Aluminized Ni-Base Superalloy. Metals, 9.10.3390/met9070782 ↗
4. Preparation and oxidation performance of a low-diffusion Pt-modified aluminide coating with Re-base diffusion barrier10.1016/j.corsci.2020.108582 ↗
5. Characterization, growth kinetics and formation mechanism of aluminide coating by plasma paste aluminizing on IN73810.1016/j.vacuum.2020.109968 ↗
6. Synergistic effect of CeO2 and Al2O3 nanoparticle dispersion on the oxidation behavior of MCrAlY coatings deposited by HVOF10.1016/j.ceramint.2019.10.184 ↗
7. Long-term oxidation of MCrAlY coatings at 1000 °C and an Al-activity based coating life criterion10.1016/j.surfcoat.2017.09.086 ↗
8. Kilic, M., Ozkan, D., Gok, M.S., and Karaoglanli, A.C. (2020). Room- and high temperature Wear Resistance of MCrAlY Coatings Deposited by Detonation Gun (D-gun) and Supersonic Plasma Spraying (SSPS) Techniques. Coatings, 10.10.3390/coatings10111107 ↗
9. Cold spray for production of in-situ nanocrystalline MCrAlY coatings—Part II: Isothermal oxidation performance10.1016/j.surfcoat.2021.126828 ↗
10. Durability of underaluminized thermal barrier coatings during exposure at high temperature10.1016/j.surfcoat.2019.125236 ↗
11. Ozgurluk, Y., Doleker, K.M., Ozkan, D., Ahlatci, H., and Karaoglanli, A.C. (2019). Cyclic Hot Corrosion Failure Behaviors of EB-PVD TBC Systems in the Presence of Sulfate and Vanadate Molten Salts. Coatings, 9.10.3390/coatings9030166 ↗
12. Microstructure and cyclic oxidation behavior of APS TBC systems drilled with various laser methods10.1016/j.surfcoat.2019.125018 ↗
13. Thermal diffusivity measurement of ceramic materials used in spraying of TBC systems10.1007/s10973-019-08589-8 ↗
14. Oxidation behavior and microstructure evolution of alumina-forming austenitic & high entropy alloys in steam environment at 1200 °C10.1016/j.corsci.2020.108654 ↗
15. Y/Hf-doped AlCoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance10.1016/j.corsci.2019.108426 ↗
16. Surface oxidation mechanism of a refractory high-entropy alloy10.1038/s41529-019-0082-5 ↗
17. High-entropy FeNiCoCr alloys with improved mechanical and tribological properties by tailoring composition and controlling oxidation10.1016/j.jmst.2020.12.042 ↗
18. Effect of Sn addition on the high-temperature oxidation behavior of high Nb-containing TiAl alloys10.1016/j.corsci.2020.108449 ↗
19. Optimizing high-temperature oxidation behaviors of high-Nb-containing TiAl alloys by addition of boron10.1016/j.corsci.2020.108971 ↗
20. Sintering densification, microstructure and mechanical properties of Sn-doped high Nb-containing TiAl alloys fabricated by pressureless sintering10.1016/j.intermet.2020.106891 ↗
21. Oxidation behaviour of particle reinforced MoSi2 composites at temperatures up to 1700 °C10.1002/maco.200403833 ↗
22. Oxidation of Mo-Si-B Alloys and Coatings in a Water Vapor Environment10.1007/s11085-021-10064-5 ↗
23. Enhanced oxidation resistance of (Mo95W5)85Ta10(TiZr)5 refractory multi-principal element alloy up to 1300 °C10.1016/j.actamat.2021.117114 ↗
24. Low-Density, High-Temperature Co Base Superalloys10.1146/annurev-matsci-080619-014459 ↗
25. Accelerated design of novel W-free high-strength Co-base superalloys with extremely wide γ/γ’ region by machine learning and CALPHAD methods10.1016/j.actamat.2020.01.004 ↗
26. Shearing of γ’ particles in Co-base and Co-Ni-base superalloys10.1016/j.actamat.2018.09.013 ↗
27. Influence of Co to Ni ratio in γ’-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C10.1016/j.corsci.2019.05.007 ↗
28. New Co-based γ-γ′ high-temperature alloys10.1007/s11837-010-0013-y ↗
29. Corrosion Behavior and Passivity of Nickel-Chromium and Cobalt-Chromium Alloys10.1149/1.2427729 ↗
30. Cobalt-based alloys for orthopaedic applications studied by electrochemical and XPS analysis10.1023/B:JMSM.0000030204.08616.3d ↗
31. The effect of alloying elements on oxide scale spallation of multicomponent Co-based superalloys10.1016/j.corsci.2021.109787 ↗
32. Transport mechanisms during the high-temperature oxidation of ternary γ/γ′ Co-base model alloys10.1038/s41529-019-0096-z ↗
33. Early stages of high-temperature oxidation of Ni- and Co-base model superalloys: A comparative study using rapid thermal annealing and advanced electron microscopy10.1016/j.corsci.2021.109744 ↗
34. Accelerated discovery of oxidation resistant CoNi-base γ/γ’ alloys with high L12 solvus and low density10.1016/j.matdes.2019.108445 ↗
35. High-Temperature Oxidation Behavior of a Novel Co-Base Superalloy10.1007/s11661-018-4736-7 ↗
36. Synthesis of simple and platinum-modified aluminide coatings on cobalt (Co)-base superalloys via a vapor phase aluminizing process10.1016/j.surfcoat.2008.08.072 ↗
37. Cyclic oxidation behavior of a cobalt aluminide coating on Co-base superalloy AMS 560810.1016/j.surfcoat.2005.07.082 ↗
38. Cyclic oxidation behavior of aluminide coatings on the Co-base superalloy DZ40M10.1016/S0257-8972(01)01304-4 ↗
39. Evaluation of fractures in MAR-M509 alloy samples after fatigue strength tests
40. thermal-mechanical fatigue of mar-m 509 superalloy. comparison with low-cycle fatigue behaviour10.1111/j.1460-2695.1991.tb00647.x ↗
41. Thermal-mechanical fatigue of MAR-M 509 with a thermal barrier coating10.1016/S0921-5093(01)01208-4 ↗
42. Neises-von Puttkamer, M.; Quadakkers, W.J. High temperature oxidation and erosion of candidate materials for particle receivers of concentrated solar power tower systems10.1016/j.solener.2019.06.057 ↗
43. A study of the dependence on the Co and Ni proportions of the oxidation at elevated temperature of TaC-strengthened {Ni and Co}-based cast superalloys10.1016/j.matchemphys.2020.123088 ↗
44. Quantitative analysis of oxide films on ODS-alloys using MCs+-SIMS and e-beam SNMS
45. Composition and growth mechanisms of alumina scales on FeCrAl-based alloys determined by SNMS10.1016/0169-4332(91)90069-V ↗
46. Characterization of oxidized Ni-based superalloys by GD-OES10.1039/C7JA00069C ↗
47. Effect of Surface Treatment on High Temperature Oxidation Behavior of IN 713C10.1007/s11665-018-3621-2 ↗
48. Nowak, W.J., Siemek, K., Ochał, K., Kościelniak, B., and Wierzba, B. (2020). Consequences of different mechanical surface preparation of Ni-base alloys during high temperature exposure. Materials, 13.10.3390/ma13163529 ↗
49. Protective and non-protective scale formation of NiCr alloys in water vapour containing high- and low-pO2 gases10.1016/j.corsci.2008.03.001 ↗
50. Growth and adherence of chromia based surface scales on Ni-base alloys in high- and low-pO2 gases10.1016/j.msea.2007.05.035 ↗
51. Oxidation of Ni-Cr-Al alloys between 1100 °C and 1200 °C
52. Young, D.J. (2008). High Temperature Oxidation and Corrosion of Metals, Elsevier. [2nd ed.].
53. Spallation Behavior of Thermally Grown Nickel Oxide on Nickel10.1007/s11085-009-9139-0 ↗
54. Mrowec, S., and Werber, T. (1965). Korozja Gazowa, WYDAWNICTWO “ŚLĄSK”.
55. Self-Diffusion in Cobalt10.1103/PhysRev.82.72 ↗
56. Barin, I. (1995). Thermochemical Data of Pure Substances, VCH.10.1002/9783527619825 ↗