Effects of Cr and Nb Additions on Sliding Wear Behaviors of the FePSiB Coatings
Source abstract
Abstract
The tribological properties of the FePSiB amorphous/nanocrystalline coatings with Cr and Nb additions were investigated in reciprocating mode against tungsten carbide friction coupling with different dry sliding conditions. The wear rates of the FePSiB-based coatings increase linearly with the normal load and sliding speed. The coatings with Cr and Nb promote the formation of successive and compact oxide film on friction surface, which decreases significantly wear rate of the coating. Nano-mechanical characterization done to map the correlation between the elastic properties and wear resistance. The main damage mechanisms of the FePSiB-based coatings under dry friction conditions are abrasion wear, delamination failure and oxidation wear.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanics and Materials, Hohai University, Nanjing 211100, China
Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology, Nanjing 211167, China
National Institute of Defense Technology Innovation, Academy of Military Sciences PLA China, Beijing 100010, China
Funding
National Natural Science Foundation of China · the Fundamental Research Funds for the Central Universities · the Key Research and Development plan of Jiangsu Province, China
References (29)
Show source-provided references
1. Amorphous coatings and surfaces on structural materials10.1080/10408436.2015.1053602 ↗
2. Laser processing of Fe-based bulk amorphous alloy10.1016/j.surfcoat.2010.10.029 ↗
3. Effect of Zr on microstructure of metallic glass coatings prepared by gas tunnel type plasma spraying10.1166/jnn.2012.4944 ↗
4. Fabrication and characterization of supersonic plasma sprayed Fe-based amorphous metallic coatings10.1016/j.matdes.2016.08.003 ↗
5. Laser processing of Fe based bulk amorphous alloy coating on zirconium10.1016/j.surfcoat.2013.12.043 ↗
6. Laser processing of Fe-based bulk amorphous alloy coatings on titanium10.1007/s11661-013-1846-0 ↗
7. Fe-based amorphous coating for corrosion protection of magnesium alloy10.1016/j.matdes.2016.07.031 ↗
8. Applications in the nuclear industry for thermal spray amorphous metal and ceramic coatings10.1007/s11661-009-9830-4 ↗
9. Electric arc spray coatings increase cost and reliability of power generation systems
10. High-temperature erosion resistance of FeBSiNb amorphous coatings deposited by arc spraying for boiler applications10.1007/s11666-012-9876-5 ↗
11. Iron-based bulk metallic glasses10.1179/1743280412Y.0000000007 ↗
12. Characterization of gas tunnel type plasma sprayed TiN reinforced Fe-based metallic glass coatings10.1016/j.jallcom.2012.09.111 ↗
13. Wear behaviors of Fe-based amorphous composite coatings reinforced by Al2O3 particles in air and in NaCl solution10.1016/j.matdes.2015.08.142 ↗
14. Effect of heat treatment on the structure, cavitation erosion and erosion–corrosion behavior of Fe-based amorphous coatings10.1016/j.triboint.2015.04.039 ↗
15. Microstructure and wear behavior of Fe-based amorphous HVOF coatings produced from commercial precursors10.1016/j.surfcoat.2016.10.057 ↗
16. Devitrification of arc-sprayed FeBSiNb amorphous coatings: Effects on wear resistance and mechanical behavior10.1016/j.surfcoat.2013.08.054 ↗
17. Wear behaviors of arc-sprayed FeBSiNb amorphous coatings10.1007/s11249-015-0598-y ↗
18. Microstructure and fracture toughness of the FePSiB-based amorphous/nanocrystalline coatings10.1016/j.msea.2017.04.082 ↗
19. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
20. Two-step method to evaluate equibiaxial residual stress of metal surface based on micro-indentation tests10.1016/j.matdes.2011.02.044 ↗
21. On the significance of the H/E ratio in wear control: A nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
22. Jeong, D. (2003). Abrasive Wear Behaviour of Electrodeposited Nanocrystalline Materials. [Ph.D.Thesis, University of Toronto].
23. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals10.1016/j.actamat.2007.01.038 ↗
24. Contact and rubbing of flat surface10.1063/1.1721448 ↗
25. Dry reciprocating sliding wear behavior and mechanisms of bulk metallic glass composites10.1016/j.wear.2016.01.003 ↗
26. Hardness-temperature relationships in metals10.1007/BF00550166 ↗
27. Suh, N.P. (1986). Tribophysics, Prentice-Hall.
28. Formation and properties Fe-based amorphous/nanocrystalline coating prepared by wire arc spraying process10.1016/j.jnoncrysol.2009.06.024 ↗
29. Crystallization and high mechanical strength of Al-based amorphous alloys10.2320/matertrans1989.35.293 ↗