Assessment of Corrosion Properties of Selected Mineral Waters
Source abstract
Abstract
This paper presents an analysis of natural mineral waters recognized by EU member states (on the basis of being announced in the Official Journal of the European Union) and originating in Polish territory. For each of these waters, calculations were made in relation to the Langelier saturation index, Ryznar stability index, and indices S1 (effect of chloride and sulfate ions on iron and steel), S2 (effect of nitrate ions on zinc), and S3 (effect of bicarbonate/sulfate ratio on copper). The impact of mineral waters on copper, hot-dip galvanized iron, stainless steel, acid-resistant steel, cast iron, low-alloy steel, and nonalloy steel was assessed on the basis of the indices calculated. The analysis allowed determination of the possibility of these measures being used in assessing the performance of mineral water installations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Water Treatment and Disinfection · Integrated Water Resources Management · Mine drainage and remediation techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Water Supply and Sewerage Systems, Environmental Engineering and Architecture, Faculty of Civil, Rzeszow University of Technology, Al. Powstancow Warszawy 6, 35-959 Rzeszow, Poland
Department of Water Purification and Protection, Environmental Engineering and Architecture, Faculty of Civil, Rzeszow University of Technology, Al. Powstancow Warszawy 6, 35-959 Rzeszow, Poland
References (45)
Show source-provided references
1. Surface water monitoring in the area of the Zelazny Most waste disposal
2. Wąsowski, J., Kowalski, D., Kowalska, B., Kwietniewski, M., and Zawilska, M. (2019). Water Quality Changes in Cement-Lined Water Pipe Networks. Appl. Sci., 9.10.3390/app9071348 ↗
3. Seasonal Character of Changes in Nitrogen Forms in Waters of Korytow and Laki Korytowskie Retention Reservoirs
4. Use of artificial intelligence in predicting the turbidity retention coefficient during ultrafiltration of water
5. Rak, J.R., Tchórzewska-Cieślak, B., and Pietrucha-Urbanik, K. (2019). A Hazard Assessment Method for Waterworks Systems Operating in Self-Government Units. Int. J. Environ. Res. Public Health, 16.10.3390/ijerph16050767 ↗
6. Ko, S.J., An, J.-H., Kim, Y.-S., Kim, W.-C., and Kim, J.-G. (2019). Effects of Corrosion on Mechanical Properties of Welded Carbon Steel Pipe in District Heating Water. Materials, 12.10.3390/ma12223682 ↗
7. Nanofiltration renovation of mineral water10.1515/aep-2017-0021 ↗
8. Choucri, J., Zanotto, F., Grassi, V., Balbo, A., Ebn Touhami, M., Mansouri, I., and Monticelli, C. (2019). Corrosion Behavior of Different Brass Alloys for Drinking Water Distribution Systems. Metals, 9.10.3390/met9060649 ↗
9. Ondrejka Harbulakova, V., Estokova, A., and Kovalcikova, M. (2017). Correlation Analysis between Different Types of Corrosion of Concrete Containing Sulfate Resisting Cement. Environments, 4.10.3390/environments4030044 ↗
10. Vertova, A., Miani, A., Lesma, G., Rondinini, S., Minguzzi, A., Falciola, L., and Ortenzi, M.A. (2019). Chlorine Dioxide Degradation Issues on Metal and Plastic Water Pipes Tested in Parallel in a Semi-Closed System. Int. J. Environ. Res. Public Health, 16.10.3390/ijerph16224582 ↗
11. Li, M., Liu, Z., and Chen, Y. (2018). Physico-chemical Characteristics of Corrosion Scales from Different Pipes in Drinking Water Distribution Systems. Water, 10.10.3390/w10070931 ↗
12. Potential impacts of changing supply-water quality on drinking water distribution: A review10.1016/j.watres.2017.03.031 ↗
13. Ondrejka Harbulakova, V., Zelenakova, M., Purcz, P., and Olejnik, A. (2018). Selection of the Best Alternative of Heating System by Environmental Impact Assessment—Case Study. Environments, 5.10.3390/environments5020019 ↗
14. Evaluating the effect of periodic disinfectant type transitions on the corrosion rate of common distribution system metals10.5004/dwt.2019.24801 ↗
15. Evaluation of corrosiveness of mineral and table waters from Polish health resorts
16. Urbanik, M., Tchórzewska-Cieślak, B., and Pietrucha-Urbanik, K. (2019). Analysis of the Safety of Functioning Gas Pipelines in Terms of the Occurrence of Failures. Energies, 12.10.3390/en12173228 ↗
17. European Commission (2013). List of Natural Mineral Waters Recognised by Member States, European Commission. OJ: JOC_2013_095_R_0038_01.
18. Skowrońska, D. (2017). Assessment of the Corrosive Properties of Selected Mineral Water. [Master Thesis, Rzeszow University of Technology].
19. ISO 1885:2017 (1999). Corrosion of Metals and Alloys. Basic Terms and Definitions, ISO.
20. DIN 50930-1:1993-02 Korrosion der Metalle; Korrosion Metallischer Werkstoffe im Innern von Rohrleitungen, Behältern und Apparaten bei Korrosionsbelastung durch Wässer, DIN. Allgemeines.
21. N-72/C-04609 (2019, June 29). Water and Sewage. Initial Qualitative Assessment of the Corrosive Effect of Cold Natural Waters on Pipes Made of Cast Iron, Ordinary or Galvanized Steel. Available online: https://sklep.pkn.pl/.
22. EN 12502-1:2004 (2005). Protection of Metallic Materials against Corrosion. Guidance on the Assessment of Corrosion Likelihood in Water Distribution and Storage Systems, BSI.
23. EN 12502-2:2004 (2004). Protection of Metallic Materials against Corrosion. Guidance on the Assessment of Corrosion Likelihood in Water Distribution and Storage Systems. Influencing Factors for Copper and Copper Alloys, BSI.
24. EN 12502-3:2004 (2004). Protection of Metallic Materials against Corrosion. Guidance on the Assessment of Corrosion Likelihood in Water Distribution and Storage Systems. Influencing Factors for Hot Dip Galvanised Ferrous Materials, BSI.
25. EN 12502-4:2004 (2004). Protection of Metallic Materials against Corrosion. Guidance on the Assessment of Corrosion Likelihood in Water Distribution and Storage Systems. Influencing Factors for Stainless Steels, BSI.
26. EN 12502-5:2004 (2004). Protection of Metallic Materials against Corrosion. Guidance on the Assessment of Corrosion Likelihood in Water Distribution and Storage Systems. Influencing Factors for Cast Iron, Unalloyed and Low Alloyed Steels, BSI.
27. EN 806-1:2000 (2000). Specifications for Installations inside Buildings Conveying Water for Human Consumption. General, BSI.
28. EN 806-2:2005 (2005). Specifications for Installations inside Buildings Conveying Water for Human Consumption. Design, BSI.
29. EN 806-3:2006 (2006). Specification for Installations inside Buildings Conveying Water for Human Consumption. Pipe Sizing, BSI.
30. EN 806-4:2010 (2010). Specifications for Installations inside Buildings Conveying Water for Human Consumption. Installation, BSI.
31. EN 806-5:2012 (2012). Specifications for Installations inside Buildings Conveying Water for Human Consumption. Operation and Maintenance, BSI.
32. European Union (2009). Directive 2009/54/EC of the European Parliament and of the Council, of 18 June 2009, on the exploitation and marketing of natural mineral waters. Off. J. Eur. Union, 164, 45.
33. (2019, June 29). Council Directive 98/83/EC of 3 November 1998 on the Quality of Water Intended for Human Consumption. Available online: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX%3A31998L0083.
34. (2020). STATISTICA—Data Analysis Software System, StatSoft, Inc.. Available online: www.statsoft.com.
35. Assessment of corrosive aggressiveness of tap water in relation to installation materials
36. Corrosion aggressiveness of industrial waters
37. Ibekwe, A.M., and Murinda, S.E. (2019). Linking Microbial Community Composition in Treated Wastewater with Water Quality in Distribution Systems and Subsequent Health Effects. Microorganisms, 7.10.3390/microorganisms7120660 ↗
38. Dynamics of drinking water biofilm in flow/non-flow conditions10.1016/j.watres.2006.11.007 ↗
39. Lee, H., Rasheed, U., and Kong, M. (2018). A Study on the Comparison of Corrosion in Water Supply Pipes Due to Tap Water (TW) and Reclaimed Water (RW). Water, 10.10.3390/w10040496 ↗
40. Characterization of the Corrosive Action of Mineral Waters from Thermal Sources: A Case Study at Azores Archipelago, Portugal10.3390/w7073515 ↗
41. Correlation between corrosion indices and corrosiveness of groundwater: A study with reference to selected areas of Krishna District, Andhra Pradesh, India10.1007/s12665-017-6908-y ↗
42. Assessment of groundwater quality and evaluation of scaling and corrosiveness potential of drinking water samples in villages of Chabahr city, Sistan and Baluchistan province in Iran10.1016/j.dib.2017.11.003 ↗
43. Mineral waters characterization in the Azores archipelago (Portugal)10.1016/j.jvolgeores.2009.12.001 ↗
44. Assessment of corrosion and scaling potential of the groundwater in the Thanjavur district using hydrogeochemical analysis and spatial modeling techniques10.1007/s42452-019-0423-6 ↗
45. Evaluation of hydrogeochemical processes and groundwater quality for suitability of drinking and irrigation purposes: A case study in the Aosta Valley region, Italy10.1007/s12517-017-3031-z ↗