Anticorrosion Property of Alcohol Amine Modified Phosphoric and Tannic Acid Based Rust Converter and Its Waterborne Polymer-Based Paint for Carbon Steel
Source abstract
Abstract
Four kinds of alcohol amines were tested to improve the anticorrosion performance of the phosphoric and tannic acid (PTA)-based rust converter. The alcohol amine modified PTA rust converters with the optimum mechanical and functional performances were used to prepare the homogeneous single-component waterborne rust conversion-based paint. The mechanical properties and the long-term corrosion resistance of the synthesized rust converter-based paint were investigated. The results show that alcohol amine modified PTA rust converter can convert the rust layer into a thick passivation film with iron tannate and iron phosphate as the main components, significantly improving the corrosion resistance of the carbon steel. The alcohol amine D modified PTA rust converter (RC-D) showed the best anticorrosion and rust conversion performances. The waterborne rust conversion-based paint can convert the rust layer of steel into a blue-black and relatively flat passivation film layer. The waterborne polymer-based paint containing 10 wt.% RC-D significantly improves the long-term corrosion resistance of the rusty steel and the mechanical property of paint.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering, Yantai University, Yantai 264005, China
School of Civil Engineering, Wuhan University, Wuhan 430072, China
Funding
National Natural Science Foundation of China · Research and Development Key Project of Shandong Province · Key projects of Shandong Natural Science Foundation
References (64)
Show source-provided references
1. A study on the interaction between chloride ions and CO2 towards carbon steel corrosion10.1016/j.corsci.2020.108531 ↗
2. Corrosion of steel bars embedded in fibre reinforced concrete under chloride attack: State of the art10.1016/j.cemconres.2015.10.006 ↗
3. Corrosion rate of carbon steel in carbonated concrete—A critical review10.1016/j.cemconres.2017.10.007 ↗
4. Critical chloride content in reinforced concrete—An updated review considering Chinese experience10.1016/j.cemconres.2018.11.020 ↗
5. Propagation of corrosion-induced cracks of the RC beam exposed to marine environment under sustained load for a period of 26 years10.1016/j.cemconres.2017.09.014 ↗
6. Numerical model for corrosion rate of steel reinforcement in cracked reinforced concrete structure10.1016/j.conbuildmat.2018.05.215 ↗
7. Preparation of corrosion inhibitor loaded zeolites and corrosion resistance of carbon steel in simulated concrete pore solution10.1016/j.conbuildmat.2019.07.141 ↗
8. Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones10.1016/j.conbuildmat.2018.05.120 ↗
9. Numerical and experimental study of moisture and chloride transport in unsaturated concrete10.1016/j.conbuildmat.2018.08.158 ↗
10. Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions10.1016/j.conbuildmat.2013.04.024 ↗
11. Experimental study on influence of post-pouring joint on long-term performance of steel-concrete composite beam10.1016/j.engstruct.2019.02.003 ↗
12. Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site10.1016/j.conbuildmat.2012.07.061 ↗
13. A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves10.1016/j.conbuildmat.2020.119695 ↗
14. Li, M., Liu, Z., Yang, Z., Wang, Z., and Yuan, H. (2020). Bond-slip behaviors between reinforced concrete and coated rebar via a new strain monitoring method and FEA simulation. Constr. Build. Mater., 120402.10.1016/j.conbuildmat.2020.120402 ↗
15. Effectiveness protention performance of an internal blending organic corosion inhibitor for carbon steel in chloride contaminated simulated concrete pore solution10.3151/jact.18.116 ↗
16. Impact of compressive fatigue on chloride diffusion coefficient in OPC concrete: An analysis using EIS method10.1016/j.conbuildmat.2016.03.108 ↗
17. Possible improvements in the action of some rust converters10.1016/S0010-938X(00)00139-6 ↗
18. Innovative cleaner production for steel phosphorization using Zn-Mn phosphating solution10.1016/j.jclepro.2010.01.019 ↗
19. Synergistic corrosion protection for galvanized steel by phosphating and sodium silicate post-sealing10.1016/j.surfcoat.2007.08.001 ↗
20. Song, B., Yang, L., Han, L., and Jia, L. (2019). Metal ion-chelated tannic acid coating for hemostatic dressing. Materials, 12.10.3390/ma12111803 ↗
21. Characterization and antioxidative properties of condensed tannins from the mangrove plant aegiceras corniculatum10.1002/app.35258 ↗
22. Effect of tannic acid on corrosion behavior of carbon steel in NaCl solution10.1016/j.jmst.2018.09.001 ↗
23. Effects of tannic acid on properties of anodic coatings obtained by micro arc oxidation on AZ91 magnesium alloy10.1016/j.surfcoat.2012.06.056 ↗
24. Facile surface coating of metal-tannin complex onto PVDF membrane with underwater superoleophobicity for oil-water emulsion separation10.1016/j.surfcoat.2020.125630 ↗
25. Study of the formation and growth of tannic acid based conversion coating on AZ91D magnesium alloy10.1016/j.surfcoat.2009.09.022 ↗
26. The delamination of organic coatings from rusty steel substrates10.1016/0010-938X(93)90037-H ↗
27. Yang, W., Sousa, A.M.M., Thomas-Gahring, A., Fan, X., Jin, T., Li, X., Tomasula, P.M., and Liu, L. (2016). Electrospun polymer nanofibers reinforced by tannic acid/fe+++ complexes. Materials, 9.10.3390/ma9090757 ↗
28. Role of tannic acid based rust converter on formation of passive film on zinc rich coating exposed in simulated concrete pore solution10.1016/j.surfcoat.2007.07.013 ↗
29. The inhibition effect of tannic acid on mild steel corrosion in seawater wet/dry cyclic conditions10.1016/j.corsci.2013.01.040 ↗
30. Synthesis of phosphorylated rust metamorphoses and its comparative corrosion study on steel samples simulated in different atmospheres10.1108/ACMM-11-2014-1460 ↗
31. The application of infrared spectroscopy to a study of phosphoric and tannic acids interactions with magnetite (Fe3O4), goethite (α-FeOOH) and lepidocrocite (γ-FeOOH)10.1016/S0010-938X(97)00060-7 ↗
32. Possible improvement of catechin as corrosion inhibitor in acidic medium10.1016/j.corsci.2012.08.012 ↗
33. Inhibitive action of mangrove tannins and phosphoric acid on pre-rusted steel via electrochemical methods10.1016/j.corsci.2008.02.013 ↗
34. Green approach to corrosion inhibition of mild steel in two acidic solutions by the extract of punica granatum peel and main constituents10.1016/j.matchemphys.2011.10.027 ↗
35. The effect of tannins and pH on the corrosion of steel in wood extracts10.1002/maco.201005845 ↗
36. The influence of a corrosive wood-cutting environment on the mechanical properties of hardmetal tools10.1016/S0263-4368(01)00059-2 ↗
37. Corrosion behaviour of tool steels in tannic acids10.1002/maco.200805065 ↗
38. The effect of phosphoric acid on rust studied by mössbauer spectroscopy10.1016/0010-938X(90)90003-N ↗
39. Construction of a highly-effective/sustainable corrosion protective composite nanofilm based on Aminotris(methylphosphonic acid) and trivalent cerium ions on mild steel against chloride solution10.1016/j.conbuildmat.2020.119838 ↗
40. Corrosion resistance phosphate coating formed by steam assisted curing on cast Al-Si alloy10.1016/j.surfcoat.2019.125242 ↗
41. Fabrication of metal-organic based complex film based on three-valent samarium ions-[bis (phosphonomethyl) amino] methylphosphonic acid (ATMP) for effective corrosion inhibition of mild steel in simulated seawater10.1016/j.conbuildmat.2019.117812 ↗
42. The influence of the interfacial conditions on rust conversion by phosphoric acid10.1016/S0010-938X(97)00058-9 ↗
43. Corrosion protection mechanism of aluminum triphosphate modified by organic acids as a rust converter10.1016/j.porgcoat.2019.105508 ↗
44. Inhibitive performance of a rust converter on corrosion of mild steel10.1007/s11665-014-1199-x ↗
45. Application of infrared spectroscopy for investigation of rust phase component conversion by agents containing oak tannin and phosphoric acid10.5006/1.3585278 ↗
46. Effect of treatment with tannic, gallic and phosphoric acids on the electrochemical behaviour of rusted steel10.1016/0013-4686(92)87112-D ↗
47. High-performance rust converter with a formula based on polyphosphoric acid and tannic acid
48. Progress in rust converters10.1016/j.porgcoat.2018.11.013 ↗
49. Electrochemical behaviour of amino alcohol-based inhibitors used to control corrosion of reinforcing steel10.1016/j.electacta.2004.01.041 ↗
50. Aminoalcohol based mixed corrosion inhibitors10.1016/S0958-9465(03)00040-4 ↗
51. Adsorption and corrosion inhibition performance of some environmental friendly organic inhibitors for mild steel in HCl solution via experimental and theoretical study10.1016/j.colsurfa.2020.124610 ↗
52. Schiff’s bases derived from l-lysine and aromatic aldehydes as green corrosion inhibitors for mild steel: Experimental and theoretical studies10.1016/j.molliq.2015.12.027 ↗
53. Electrochemical and theoretical investigation on the corrosion of aluminium in acidic solution containing some schiff bases10.1016/j.apsusc.2006.01.026 ↗
54. Adsorption characteristics of corrosion inhibitors from corrosion rate measurements10.1016/j.corsci.2003.10.013 ↗
55. Corrosion inhibition of pure iron in 0.5 M H2SO4 solutions by ethanolamines10.1016/j.apsusc.2004.10.044 ↗
56. Molecular structural aspects of organic corrosion inhibitors: Influence of −CN and −NO2 substituents on designing of potential corrosion inhibitors for aqueous media10.1016/j.molliq.2020.113874 ↗
57. Performance of generic and proprietary corrosion inhibitors in chloride-contaminated silica fume cement concrete10.1016/j.conbuildmat.2008.10.010 ↗
58. The proton transfer and hydrogen bonding complexes of (2-hydroxyethyl)amines with acids: A theoretical study10.1016/j.comptc.2012.01.033 ↗
59. Fe2O3/Fe3O4/PANI/MWCNT nanocomposite with the optimum amount and uniform orientation of Fe2O3/Fe3O4 NPs in polyaniline for high microwave absorbing performance10.1016/j.jallcom.2020.156052 ↗
60. Synthesis and characterization of a novel Pyrrole-2-carboxylic acid functionalized magnetic Fe3O4 as a nanocatalyst for synthesis and antibacterial activities of novel isoxazolo[4,3-e]indazole derivatives10.1016/j.molstruc.2020.129265 ↗
61. Multi-catalysis induced by pulsed discharge plasma coupled with graphene-Fe3O4 nanocomposites for efficient removal of ofloxacin in water: Mechanism, degradation pathway and potential toxicity10.1016/j.chemosphere.2020.129089 ↗
62. Comparative removal of As(V) and Sb(V) from aqueous solution by sulfide-modified α-FeOOH10.1016/j.envpol.2020.115658 ↗
63. Iron oxide/hydroxide (α, γ-FeOOH) nanoparticles as high potential adsorbents for lead removal from polluted aquatic media10.1016/j.jiec.2014.07.039 ↗
64. Properties of γ-FeOOH, α-FeOOH and α-Fe2O3 particles precipitated by hydrolysis of Fe3+ ions in perchlorate containing aqueous solutions10.1016/j.jallcom.2005.09.043 ↗