On the Role of γ-Fe2O3 Nanoparticles and Reduced Graphene Oxide Nanosheets in Enhancing Self-Cleaning Properties of Composite TiO2 for Cultural Heritage Protection
Source abstract
Abstract
The durability of novel metallic artifacts and buildings is an open issue, and the role of smart protecting coatings in extending these artifacts’ lifetimes is crucial. In this paper, the role of γ-Fe2O3 nanoparticles and reduced graphene oxide (rGO) nanosheets on enhancing the self-cleaning properties of composite TiO2 films and reducing metal alterations due to contact with acid rain and pollutants is investigated. The photocatalytic assessment of the TiO2 based films indicates that there are optimum contents for γ-Fe2O3 and rGO, which confer the film lower bandgap and tune the TiO2 anatase/rutile ratio. By adding a proper content of γ-Fe2O3, wettability is reduced both in dark and under illumination, which could be related to higher roughness. γ-Fe2O3 overloading causes increasing crack density and eventually a fully cracked structure. Adding an appropriate amount of rGO causes a sharp increase in roughness, due to the stacking of rGO nanosheets, while simultaneously avoiding cracking. At higher contents of rGO, wettability further decreases due to higher amounts of hydroxyl groups bound onto rGO; also in this case, overloading causes film cracking. Evaluation of self-cleaning performance and discoloration resistance under soiling and acid rain simulated tests demonstrates that proper loadings of γ-Fe2O3 and rGO present higher efficiency thanks to higher superhydrophilic tendency and higher photocatalytic activities, as well as an efficient barrier effect.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Recycling and Waste Management Techniques · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, 20124 Milano, Italy
Department of Chemistry, Sharif University of Technology, Tehran 145888-9694, Iran
Funding
Ministero dell’Istruzione, dell’Università e della Ricerca
References (88)
Show source-provided references
1. Mokhtarifar, M., Pedeferri, M.P., and Diamanti, M.V. (2020). Towards a better preservation of current and future outdoor architectural heritage; maximum suppression of discolouration in anodized and non-anodized titanium sheets. Environ. Technol. Rev.10.1080/21622515.2020.1732480 ↗
2. Quan, Y.Y., Zhang, L.Z., Qi, R.H., and Cai, R.R. (2016). Self-cleaning of Surfaces: The role of surface wettability and dust types. Sci. Rep., 6.10.1038/srep38239 ↗
3. Semiconductor photocatalysis-Mechanistic and synthetic aspects10.1002/anie.201201200 ↗
4. Effects of titanium carbide (TiC) and anodizing voltages on discoloration resistance of colored-titanium sheets10.1016/j.corsci.2010.02.042 ↗
5. Diamanti, M.V., Garbagnoli, P., Curto, B., and Pedeferri, M.P. (2015). On the Growth of Thin Anodic Oxides Showing Interference Colors on Valve Metals. Curr. Nanosci.10.2174/1573413711666150212235619 ↗
6. Decoupling the dual source of colour alteration of architectural titanium: Soiling or oxidation?10.1016/j.corsci.2013.03.019 ↗
7. Environmental and metallurgical factors affecting discoloration of titanium sheets in atmospheric environments10.2355/tetsutohagane1955.89.8_833 ↗
8. A review on the visible light active titanium dioxide photocatalysts for environmental applications10.1016/j.apcatb.2012.05.036 ↗
9. Solar photocatalysis for water disinfection: Materials and reactor design10.1039/C4CY00006D ↗
10. Progress, challenge and perspective of heterogeneous photocatalysts10.1039/C2CS35355E ↗
11. Silver doped titanium dioxide nanomaterials for enhanced visible light photocatalysis10.1016/j.jphotochem.2007.02.010 ↗
12. Plasmonic-metal nanostructures for efficient conversion of solar to chemical energy10.1038/nmat3151 ↗
13. Photocatalytic degradation of organic compounds in aqueous systems by transition metal doped polycrystalline TiO210.1016/S0920-5861(02)00048-2 ↗
14. Preparation of TiO2 thin films on glass surfaces with self-cleaning characteristics for solar concentrators10.1016/j.surfcoat.2012.06.058 ↗
15. Construction of highly ordered ZnO-TiO2 nanotube arrays (ZnO/TNTs) heterostructure for photocatalytic application10.1021/am302462d ↗
16. A highly efficient TiO2−xCx nano-heterojunction photocatalyst for visible light induced antibacterial applications10.1021/am302676a ↗
17. Nanostructured Ti1−xSxO2−yNy heterojunctions for efficient visible-light-induced photocatalysis10.1021/ic3001653 ↗
18. A non-hydrolytic sol-gel synthesis of reduced graphene oxide/TiO2 microsphere photocatalysts10.1016/j.cattod.2013.10.017 ↗
19. Photocatalytic activity enhancement of anatase-graphene nanocomposite for methylene removal: Degradation and kinetics10.1016/j.saa.2016.04.057 ↗
20. Mokhtarifar, M., Kaveh, R., Bagherzadeh, M., Lucotti, A., Pedeferri, M.P., and Diamanti, M.V. (2020). Heterostructured TiO2/SiO2/γ-Fe2O3/rGO Coating with Highly Efficient Visible-Light-Induced Self-Cleaning Properties for Metallic Artifacts. ACS Appl. Mater. Interfaces.10.1021/acsami.0c06792 ↗
21. Band-gap determination from diffuse reflectance measurements of semiconductor films, and application to photoelectrochemical water-splitting10.1016/j.solmat.2007.05.005 ↗
22. Soiling of building envelope surfaces and its effect on solar reflectance—Part II: Development of an accelerated aging method for roofing materials10.1016/j.solmat.2013.11.028 ↗
23. Crossed optical and chemical evaluations of modern glass soiling in various European urban environments10.1016/j.atmosenv.2006.06.022 ↗
24. Sol–gel synthesis of TiO2–Fe2O3 systems: Effects of Fe2O3 content and their photocatalytic properties10.1016/j.jiec.2016.05.015 ↗
25. Novel photocatalyst: Titania-coated magnetite. activity and photodissolution10.1021/jp992088c ↗
26. Sol-gel synthesis, characterisation and photocatalytic activity of pure, W-, Ag- and W/Ag co-doped TiO2 nanopowders10.1016/j.cej.2012.11.018 ↗
27. Photocatalytic performance of nano-photocatalyst from TiO2 and Fe2O3 by mechanochemical synthesis10.1016/j.jallcom.2011.05.069 ↗
28. Enhanced photocatalytic water splitting by plasmonic TiO2–Fe2O3 cocatalyst under visible light irradiation10.1021/jp5033965 ↗
29. New insight for enhanced photocatalytic activity of TiO2 by doping carbon nanotubes: A case study on degradation of benzene and methyl orange10.1021/jp909855p ↗
30. Synthesis of TiO2 with controllable ratio of anatase to rutile10.1039/c4ta01144a ↗
31. Enhanced photoelectrocatalytic activity of reduced graphene oxide/TiO2 composite films for dye degradation10.1016/j.cej.2012.04.062 ↗
32. Green synthesis of biphasic TiO2-reduced graphene oxide nanocomposites with highly enhanced photocatalytic activity10.1021/am301287m ↗
33. Hydrothermal preparation of uniform nanosize rutile and anatase particles10.1021/cm00052a010 ↗
34. Biphasic TiO2 microspheres/reduced graphene oxide for effective simultaneous photocatalytic reduction and oxidation processes10.1016/j.apcata.2017.04.017 ↗
35. Botelho, G., Andres, J., Gracia, L., Matos, L.S., and Longo, E. (2016). Photoluminescence and photocatalytic properties of Ag3PO4 microcrystals: An experimental and theoretical investigation. Chempluschem.10.1002/cplu.201500485 ↗
36. Bagherzadeh, M., and Kaveh, R. (2018). New magnetically recyclable reduced graphene oxide rGO/MFe2O4 (M = Ca, Mg)/Ag3PO4 nanocomposites with remarkably enhanced visible-light photocatalytic activity and stability. Photochem. Photobiol.10.1111/php.12968 ↗
37. Ren, W., Ai, Z., Jia, F., Zhang, L., Fan, X., and Zou, Z. (2007). Low temperature preparation and visible light photocatalytic activity of mesoporous carbon-doped crystalline TiO2. Appl. Catal. B Environ.10.1016/j.apcatb.2006.06.015 ↗
38. Liu, Y. (2014). Hydrothermal synthesis of TiO2–RGO composites and their improved photocatalytic activity in visible light. RSC Adv.10.1039/C4RA06342B ↗
39. P25-graphene composite as a high performance photocatalyst10.1021/nn901221k ↗
40. Xiang, Q., Yu, J., and Jaroniec, M. (2012). Graphene-based semiconductor photocatalysts. Chem. Soc. Rev.10.1002/chin.201218216 ↗
41. Anandan, S., Narasinga Rao, T., Sathish, M., Rangappa, D., Honma, I., and Miyauchi, M. (2013). Superhydrophilic graphene-loaded TIO2 thin film for self-cleaning applications. ACS Appl. Mater. Interfaces.10.1021/am302557z ↗
42. Powell, M.J., Quesada-Cabrera, R., Taylor, A., Teixeira, D., Papakonstantinou, I., Palgrave, R.G., Sankar, G., and Parkin, I.P. (2016). Intelligent multifunctional VO2/SiO2/TiO2 coatings for self-cleaning, energy-saving window panels. Chem. Mater.10.1021/acs.chemmater.5b04419 ↗
43. Uddin, M.J., Cesano, F., Scarano, D., Bonino, F., Agostini, G., Spoto, G., Bordiga, S., and Zecchina, A. (2008). Cotton textile fibres coated by Au/TiO2 films: Synthesis, characterization and self cleaning properties. J. Photochem. Photobiol. A Chem.10.1016/j.jphotochem.2008.05.004 ↗
44. Kesmez, Ö., Erdem Çamurlu, H., Burunkaya, E., and Arpaç, E. (2009). Sol-gel preparation and characterization of anti-reflective and self-cleaning SiO2–TiO2 double-layer nanometric films. Sol. Energy Mater. Sol. Cells.10.1016/j.solmat.2009.06.022 ↗
45. Munafò, P., Quagliarini, E., Goffredo, G.B., Bondioli, F., and Licciulli, A. (2014). Durability of nano-engineered TiO2 self-cleaning treatments on limestone. Constr. Build. Mater.10.1016/j.conbuildmat.2014.04.112 ↗
46. Yamashita, H., Nakao, H., Takeuchi, M., Nakatani, Y., and Anpo, M. (2003). Coating of TiO2 photocatalysts on super-hydrophobic porous teflon membrane by an ion assisted deposition method and their self-cleaning performance. Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. At.10.1016/S0168-583X(03)00895-4 ↗
47. Graziani, L., Quagliarini, E., Bondioli, F., and D’Orazio, M. (2014). Durability of self-cleaning TiO2 coatings on fired clay brick façades: Effects of UV exposure and wet & dry cycles. Build. Environ.10.1016/j.buildenv.2013.10.005 ↗
48. Calia, A., Lettieri, M., and Masieri, M. (2016). Durability assessment of nanostructured TiO2 coatings applied on limestones to enhance building surface with self-cleaning ability. Build. Environ.10.1016/j.buildenv.2016.09.030 ↗
49. Lettieri, M., Colangiuli, D., Masieri, M., and Calia, A. (2019). Field performances of nanosized TiO2 coated limestone for a self-cleaning building surface in an urban environment. Build. Environ.10.1016/j.buildenv.2018.10.037 ↗
50. Shakeri, A., Yip, D., Badv, M., Imani, S.M., Sanjari, M., and Didar, T.F. (2018). Self-cleaning ceramic tiles produced via stable coating of TiO2 Nanoparticles. Materials, 11.10.3390/ma11061003 ↗
51. Surface roughness analysis of hydrophilic SiO2/TiO2/glass nano bilayers by the level crossing approach10.1016/j.physa.2012.11.058 ↗
52. Electrochemical behavior of nano-iron oxide modified alkyd based waterborne coatings10.1016/j.matchemphys.2009.07.010 ↗
53. Multilayered graphene oxide membrane for water treatment: A review10.1016/j.carbon.2018.07.040 ↗
54. Effect of microstructure of graphene oxide fabricated through different self-assembly techniques on 1-butanol dehydration10.1016/j.memsci.2014.12.039 ↗
55. Bioinspired colloidal photonic crystals with controllable wettability10.1021/ar1001236 ↗
56. Fine control of the wettability transition temperature of colloidal-crystal films: From superhydrophilic to superhydrophobic10.1002/adfm.200600101 ↗
57. Lubricant-infused slippery surfaces: Facile fabrication, unique liquid repellence and antireflective properties10.1016/j.jcis.2018.10.083 ↗
58. Eshaghi, A., Dashti, A., Eshaghi, A., and Mozaffarinia, R. (2011). Photo-induced superhydrophilicity of nanocomposite TiO2–SiO2 thin film. Mater. Sci. Pol.10.2478/s13536-011-0005-9 ↗
59. Houmard, M., Riassetto, D., Roussel, F., Bourgeois, A., Berthomé, G., Joud, J.C., and Langlet, M. (2008). Enhanced persistence of natural super-hydrophilicity in TiO2–SiO2 composite thin films deposited via a sol-gel route. Surf. Sci.10.1016/j.susc.2008.09.016 ↗
60. Houmard, M., Riassetto, D., Roussel, F., Bourgeois, A., Berthomé, G., Joud, J.C., and Langlet, M. (2007). Morphology and natural wettability properties of sol-gel derived TiO2–SiO2 composite thin films. Appl. Surf. Sci.10.1016/j.apsusc.2007.06.072 ↗
61. Fateh, R., Dillert, R., and Bahnemann, D. (2013). Preparation and characterization of transparent hydrophilic photocatalytic TiO2/SiO2 thin films on polycarbonate. Langmuir.10.1021/la400191x ↗
62. Nanoscale investigation of photoinduced hydrophilicity variations in anatase and rutile nanopowders10.1021/la4034723 ↗
63. Photocatalytic activity, antibacterial effect, and photoinduced hydrophilicity of TiO2 films coated on a stainless steel substrate10.1021/es0259483 ↗
64. Effects of metal-ion dopants on the photocatalytic reactivity of quantum-sized TiO2 particles10.1002/anie.199410911 ↗
65. The role of metal ion dopants in quantum-sized TiO2: Correlation between photoreactivity and charge carrier recombination dynamics10.1021/j100102a038 ↗
66. Enhanced photoinduced super-hydrophilicity of the sol-gel-derived TiO2 thin films by Fe-doping10.1016/j.matchemphys.2005.09.021 ↗
67. Jin, F., Lv, W., Zhang, C., Li, Z., Su, R., Qi, W., Yang, Q.H., and He, Z. (2013). High-performance ultrafiltration membranes based on polyethersulfone- graphene oxide composites. RSC Adv.10.1039/c3ra42908c ↗
68. Sakai, N., Kamanaka, K., and Sasaki, T. (2016). Modulation of photochemical activity of titania nanosheets via heteroassembly with reduced graphene oxide. enhancement of photoinduced hydrophilic conversion properties. J. Phys. Chem. C.10.1021/acs.jpcc.6b06842 ↗
69. Superhydrophilic TiO2 thin film by nanometer scale surface roughness and dangling bonds10.1016/j.apsusc.2015.12.108 ↗
70. Light-induced amphiphilic surfaces10.1038/41233 ↗
71. Correlation between surface morphology and hydrophilic/hydrophobic conversion of MOCVD-TiO2 films10.1021/la9915567 ↗
72. Effect of ultrasonic treatment on highly hydrophilic TiO2 surfaces10.1021/la980623e ↗
73. The fabrication and switchable superhydrophobicity of TiO2 nanorod films10.1002/anie.200501337 ↗
74. Photocatalytic degradation of volatile organic compounds at the gas-solid interface of a TiO2 photocatalyst10.1016/S0045-6535(02)00101-7 ↗
75. Luo, Z., Pinto, N.J., Davila, Y., and Charlie Johnson, A.T. (2012). Controlled doping of graphene using ultraviolet irradiation. Appl. Phys. Lett., 100.10.1063/1.4729828 ↗
76. Probing graphene grain boundaries with optical microscopy10.1038/nature11562 ↗
77. Zhang, X., Fan, X., Yan, C., Li, H., Zhu, Y., Li, X., and Yu, L. (2012). Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide. ACS Appl. Mater. Interfaces.10.1021/am201757v ↗
78. Da, S.X., Wang, J., Geng, H.Z., Jia, S.L., Xu, C.X., Li, L.G., Shi, P.P., and Li, G. (2017). High adhesion transparent conducting films using graphene oxide hybrid carbon nanotubes. Appl. Surf. Sci.10.1016/j.apsusc.2016.09.143 ↗
79. Lu, H., Yao, Y., Huang, W.M., and Hui, D. (2014). Noncovalently functionalized carbon fiber by grafted self-assembled graphene oxide and the synergistic effect on polymeric shape memory nanocomposites. Compos. Part B Eng.10.1016/j.compositesb.2014.07.022 ↗
80. Ning, H., Li, J., Hu, N., Yan, C., Liu, Y., Wu, L., Liu, F., and Zhang, J. (2015). Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf. Carbon N. Y.10.1016/j.carbon.2015.04.054 ↗
81. Son, G.C., Hwang, D.K., Jang, J., Chee, S.S., Cho, K., Myoung, J.M., and Ham, M.H. (2019). Solution-processed highly adhesive graphene coatings for corrosion inhibition of metals. Nano Res.10.1007/s12274-018-2056-2 ↗
82. Moon, I.K., Kim, J., Lee, H., Hur, K., Kim, W.C., and Lee, H. (2013). 2D graphene oxide nanosheets as an adhesive over-coating layer for flexible transparent conductive electrodes. Sci. Rep.10.1038/srep01112 ↗
83. Akimov, G.Y., Chaika, E.V., and Marinin, G.A. (2009). Wear and fracture toughness of partially stabilized zirconia ceramics under dry friction against steel. J. Frict. Wear.10.3103/S1068366609020019 ↗
84. Paggi, M., and Reinoso, J. (2015). An anisotropic large displacement cohesive zone model for fibrillar and crazing interfaces. Int. J. Solids Struct.10.1016/j.ijsolstr.2015.04.042 ↗
85. Kajari-Schröder, S., Kunze, I., and Köntges, M. (2012). Criticality of cracks in PV modules. Energy Procedia.10.1016/j.egypro.2012.07.125 ↗
86. Paggi, M., Berardone, I., Infuso, A., and Corrado, M. (2014). Fatigue degradation and electric recovery in Silicon solar cells embedded in photovoltaic modules. Sci. Rep.10.1038/srep04506 ↗
87. Taleb, A., Mesguich, F., Hérissan, A., Colbeau-Justin, C., Yanpeng, X., and Dubot, P. (2016). Optimized TiO2 nanoparticle packing for DSSC photovoltaic applications. Sol. Energy Mater. Sol. Cells.10.1016/j.solmat.2015.09.010 ↗
88. Akimov, G.Y., Chaika, E.V., Timchenko, V.M., Marinin, G.A., and Burkhovetskii, V.V. (2009). Wear of ceramics based on magnesia- and ceria-stabilized zirconia in dry friction against steel. J. Frict. Wear.10.3103/S1068366609050122 ↗