Recent Development of Abrasive Machining Processes Enhanced with Non-Newtonian Fluids
Source abstract
Abstract
Abrasive machining processes have long been integral to various manufacturing industries, enabling precise material removal and surface finishing. In recent years, the integration of non-Newtonian fluids has emerged as a promising strategy to enhance the performance and efficiency of these processes. This review paper provides a comprehensive overview of the current state of research on abrasive machining processes, including abrasive lapping, abrasive polishing, and chemical mechanical polishing, and then analyzes in detail the abrasive machining processes enhanced with non-Newtonian fluids. It explores the fundamental principles underlying the rheological behavior of non-Newtonian fluids and their application in abrasive machining, with a focus on shear-thickening fluids. The paper will begin by introducing the abrasive machining processes, including abrasive lapping, abrasive polishing, and chemical mechanical polishing. Then, the current research status of non-Newtonian fluids will be comprehensively analyzed, and we will explore the enhancement of abrasive machining processes with non-Newtonian fluids. Finally, the paper will conclude with a discussion of the future directions and challenges in the field of abrasive machining enhanced with non-Newtonian fluids. Overall, this review aims to provide valuable insights into the potential benefits, limitations, and opportunities associated with the use of non-Newtonian fluids in abrasive machining, paving the way for further research and innovation in this promising area of manufacturing technology.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Intelligent Manufacturing, Lishui Vocational & Technical College, Lishui 323000, China
Zhejiang Junhong Machinery Co., Ltd., Lishui 321403, China
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
Funding
National Key R&D Program of China · Key Research and Development Project of Lishui
References (61)
Show source-provided references
1. Nanoindentation induced anisotropy of deformation and damage behaviors of MgF2 crystals10.1016/j.jmrt.2024.01.034 ↗
2. Exploring the structural color of micro-nano composite gratings with FDTD simulation and experimental validation10.1364/OE.510400 ↗
3. A theoretical and deep learning hybrid model for predicting surface roughness of diamond-turned polycrystalline materials10.1088/2631-7990/acdb0a ↗
4. Microstructure evolution and mechanical properties of H13 steel produced by Selective Electron Beam Melting10.1016/j.matchar.2023.113053 ↗
5. Multi-build orientation effects on microstructural evolution and mechanical behavior of truly as-built selective laser melting Ti6Al4V alloys10.1016/j.jmrt.2024.04.031 ↗
6. Shen, Q., Chen, F., Tao, Q., Ji, R., Zhang, L., Cai, D., Saetang, V., and Qi, H. (AIP Adv., 2024). Numerical investigation of various laser-waterjet coupling methods on spot power density distribution, AIP Adv., in press.10.1063/5.0217105 ↗
7. Yang, X., Song, F., Zhang, T., Yao, X., Wang, W., Zhang, Z., Hou, Y., Qi, H., and Tang, H. (Chin. J. Mech. Eng., 2024). Surface enhancement by micro-arc oxidation induced TiO2 ceramic coating on additive manufacturing Ti-6Al-4V, Chin. J. Mech. Eng., in press.
8. Hydrogen retention and affecting factors in rolled tungsten: Thermal desorption spectra and molecular dynamics simulations10.1016/j.ijhydene.2023.03.151 ↗
9. Numerical and experimental study on ultrasonic vibration-assisted micro-channelling of glasses using an abrasive slurry jet10.1016/j.ijmecsci.2016.03.013 ↗
10. Numerical investigation on particle impact erosion in ultrasonic-assisted abrasive slurry jet micro-machining of glasses10.1016/j.powtec.2016.08.057 ↗
11. CFD-based study of the abrasive flow characteristics within constrained flow passage in polishing of complex titanium alloy surfaces10.1016/j.powtec.2018.04.046 ↗
12. On the periodicity of fixed-abrasive planetary lapping based on a generic model10.1016/j.jmapro.2019.05.036 ↗
13. Ji, R., Shen, Q., Zhang, L., Zeng, X., and Qi, H. (Powder Technol., 2024). Novel photocatalysis-assisted mechanical polishing of laser cladding cobalt-based alloy using TiO2 nanoparticles, Powder Technol., in press.10.1016/j.powtec.2024.119990 ↗
14. A novel approach of jet polishing for interior surface of small-grooved components using three developed setups10.1088/2631-7990/ad1bba ↗
15. Damage evolution and removal behaviors of GaN crystals involved in double-grits grinding10.1088/2631-7990/ad207f ↗
16. Towards understanding performance enhancing mechanism of micro-holes on K9 glasses using ultrasonic vibration-assisted abrasive slurry jet10.1016/j.jmapro.2021.01.048 ↗
17. DEM and experimental study on the ultrasonic vibration-assisted abrasive finishing of WC-8Co cemented carbide cutting edge10.1016/j.powtec.2020.10.043 ↗
18. Qian, H., Chen, M., Qi, Z., Teng, Q., Qi, H., Zhang, L., and Shan, X. (2023). Review on Research and Development of Abrasive Scratching of Hard Brittle Materials and Its Underlying Mechanisms. Crystals, 13.10.3390/cryst13030428 ↗
19. Key technologies and development trends of the soft abrasive flow finishing method10.1631/jzus.A2300038 ↗
20. Li, Z., Wang, C.Y., Li, L., Wu, J.F., Yin, Z.C., and Tan, D.P. (Eng. Appl. Comput. Fluid Mech., 2024). Numerical investigation of mesoscale multiphase mass transport mechanism in fibrous porous media, Eng. Appl. Comput. Fluid Mech., in press.10.1080/19942060.2024.2363246 ↗
21. Generic three-dimensional model of freeform surface polishing with non-Newtonian fluids10.1016/j.ijmachtools.2021.103837 ↗
22. Electrochemical discharge machining of microchannels in glass using a non-Newtonian fluid electrolyte10.1016/j.jmatprotec.2022.117594 ↗
23. Li, L., Xu, P., Xu, W.X., Lu, B., Wang, C.Y., and Tan, D.P. (Mech. Syst. Signal Process., 2024). Multi-field coupling vibration patterns of the multiphase sink vortex and distortion recognition method, Mech. Syst. Signal Process., in press.10.1016/j.ymssp.2024.111624 ↗
24. Numerical investigation of double emulsion formation in non-Newtonian fluids using double co-flow geometry10.1016/j.cherd.2024.01.041 ↗
25. Li, L., Lu, B., Xu, W.X., Wang, C.Y., Wu, J.F., and Tan, D.P. (Energy, 2024). Dynamic behaviors of multiphase vortex-induced vibration for hydropower energy conversion, Energy, in press.10.1016/j.energy.2024.132897 ↗
26. A novel Non-Newtonian fluid polishing technique for zirconia ceramics based on the weak magnetorheological strengthening thickening effect10.1016/j.ceramint.2021.11.280 ↗
27. Enhanced magnetic abrasive finishing of Ti–6Al–4V using shear thickening fluids additives10.1016/j.precisioneng.2020.05.001 ↗
28. The use of boundary lubricants for the reduction of shear thickening and jamming in abrasive particle slurries10.1016/j.colsurfa.2017.09.029 ↗
29. Electrolysis combined shear thickening polishing method10.1016/j.jmapro.2023.10.031 ↗
30. Study on the affecting factors of material removal mechanism and damage behavior of shear rheological polishing of single crystal silicon carbide10.1016/j.jmapro.2024.01.040 ↗
31. Damage evolution and plastic deformation mechanism of passivation layer during shear rheological polishing of polycrystalline tungsten10.1016/j.jmrt.2023.12.122 ↗
32. Theoretical and experimental investigation on magnetorheological shear thickening polishing force using multi-pole coupling magnetic field10.1016/j.jmatprotec.2024.118414 ↗
33. Research on the shear thickening polishing CaF2 with textured hollow polishing tool10.1016/j.jmapro.2024.03.075 ↗
34. Processing properties for the Si-face of the 4H-SiC substrates using the magnetically-controlled abrasive solidification orientation–solid-phase Fenton reaction for the fabrication of the lapping–polishing plate10.1016/j.diamond.2021.108652 ↗
35. Optimisation of free-abrasive assisted lapping process with vitrified bonded diamond plates for sapphire substrates10.1016/j.precisioneng.2023.12.003 ↗
36. Removal mechanism on 4H–SiC single crystal by picosecond laser ablation-assisted chemical mechanical polishing (CMP)10.1016/j.ceramint.2024.01.239 ↗
37. Kinematics and trajectory analysis of the fixed abrasive lapping process in machining of interdigitated micro-channels on bipolar plates10.1016/j.precisioneng.2015.12.005 ↗
38. Study on removal mechanism and removal characters for SiC and fused silica by fixed abrasive diamond pellets10.1016/j.ijmachtools.2014.04.008 ↗
39. Atomic-scale surface of fused silica induced by chemical mechanical polishing with controlled size spherical ceria abrasives10.1016/j.jmapro.2022.12.008 ↗
40. Study on Chemical Mechanical Polishing Parameters of 6H-SiC Crystal Substrate Based on Diamond Abrasive10.4028/www.scientific.net/AMR.797.261 ↗
41. Theoretical and experimental investigation of chemical mechanical polishing of W-Ni-Fe alloy10.1088/2631-7990/abefb8 ↗
42. Hongyu, C., Wang, L., Peng, F., Shen, M., Hang, W., Beri, T.H., Zhang, H., Zhao, J., Han, Y., and Lyu, B. (Trans. Nonferrous Met. Soc. China, 2024). Efficient chemical mechanical polishing of W promoted by Fenton-like reaction between Cu2+ and H2O2, Trans. Nonferrous Met. Soc. China, in press.
43. Chemical mechanical polishing of silicon wafers using developed uniformly dispersed colloidal silica in slurry10.1016/j.jmapro.2023.01.007 ↗
44. Unprecedented atomic surface of silicon induced by environmentally friendly chemical mechanical polishing10.1039/D3NR01149F ↗
45. Study on the influence of non-newtonian fluid characteristics on the hydraulic performance and internal flow field of multiphase pump10.1016/j.cherd.2023.12.022 ↗
46. An Overview of Non-Newtonian Fluid10.5958/2322-0465.2016.00011.3 ↗
47. Yu, M. (2020). The Study on the Shear Thickening Behaviors of Nanosilica Fluids. [Master’s Thesis, Shanghai Jiaotong University].
48. Enhancing shear thickening10.1103/PhysRevFluids.2.033301 ↗
49. Shear-thickening behavior of polymethylmethacrylate particles suspensions in glycerine–water mixtures10.1007/s00397-010-0486-1 ↗
50. Dong, C. (2021). Research on Material Removal Mechanism of Shear Thickening Polishing and Characteristics of Polishing Slurry. [Master’s Thesis, Zhejiang University of Technology].
51. Shear thickening, frictionless and frictional rheologies in non-Brownian suspensions10.1122/1.4890747 ↗
52. A hybrid molecular dynamics study on the non-Newtonian rheological behaviors of shear thickening fluid10.1016/j.jcis.2017.03.038 ↗
53. Adaptive shearing-gradient thickening polishing (AS-GTP) and subsurface damage inhibition10.1016/j.ijmachtools.2020.103651 ↗
54. Design and Manufacturing of a Novel Shear Thickening Fluid Composite (STFC) with Enhanced out-of-Plane Properties and Damage Suppression10.1007/s10443-016-9532-1 ↗
55. Shear thickening in colloidal dispersions10.1063/1.3248476 ↗
56. Origin of material removal mechanism in shear thickening-chemical polishing10.1016/j.ijmachtools.2021.103800 ↗
57. Performance on lapping quartz glass by UV curing fixed abrasive pad with Gr2O3-diamond composite abrasives10.1016/j.mssp.2023.107926 ↗
58. Kinematics and trajectory analysis of swinging fixed abrasive plane lapping: Effect of swinging mode on the lapping uniformity10.1016/j.precisioneng.2023.12.014 ↗
59. Modeling and analysis of the material removal profile for free abrasive polishing with sub-aperture pad10.1016/j.jmatprotec.2013.09.010 ↗
60. Polishing operation of a steel bar in a shear thickening fluid medium10.1016/j.compositesb.2019.107127 ↗
61. Multi-pole magnetorheological shear thickening polishing on inner surface of aluminum alloy slender tubes10.1016/j.jmrt.2023.11.235 ↗