Thermal Stability of the Copper and the AZO Layer on Textured Silicon

Transparent conductive oxide (TCO) film is the most widely used front electrode in silicon heterojunction (SHJ) solar cells. A copper metallization scheme can be applied to the SHJ process. The abundance of zinc in the earth’s crust makes aluminum-doped zinc oxide (AZO) an attractive low-cost substitute for indium-based TCOs. No work has focused on the properties of the copper and AZO layers on the textured silicon for solar cells. This work deposited an aluminum-doped zinc oxide layer and copper metal layer on textured (001) silicon by a sputtering to form Cu/AZO/Si stacks. The structures of Cu/AZO/Si are characterized by scanning electron microscope (SEM), scanning transmission electron microscope (STEM), and energy-dispersive X-ray spectrometer (EDS). The results show that the copper thin film detached from AZO in the valley of the textured silicon substrate at a temperature of 400 °C. Additionally, the gap between the copper and AZO layers increases as temperature increases, and the 65 nm thickness AZO layer was found to be preserved up to 800 °C.