Preparation and Tribocorrosion Performance of Different Si-Doped TiSiN-Ag Coatings on Different Substrates in Seawater
Source abstract
Abstract
TiSiN-Ag composite coatings with different Si doping contents were prepared by multi-arc ion plating technology on 316L, TC4, and H65 copper substrates, respectively. The microstructure of the prepared coatings was characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy, respectively. The mechanical properties, electrochemical properties, and tribological properties were characterized by a micro-hardness tester, electrochemical workstation, scratch tester, and friction and wear tester, respectively. Results showed that the coatings with 8 wt.% Si doping content had a smaller average grain size, denser structure, excellent mechanical properties, and better anti-tribocorrosion performance than those with 5 wt.% Si doping content. The coating on the TC4 substrate with 8 wt.% Si doping content presented the best combination of properties and is a candidate for an anti-tribocorrosion material in seawater.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science & Engineering, Xi’an University of Technology, Xi’an 710048, China
CNPC Tubular Goods Research Institute, Xi’an 710077, China
School of Materials Science & Engineering, Xi’an Polytechnic University, Xi’an 710048, China
References (41)
Show source-provided references
1. Symbiotic state of Chinese land-marine economy10.1007/s11769-017-0857-y ↗
2. Evaluation of China’s marine economic efficiency under environmental constraints-an empirical analysis of China’s eleven coastal regions10.1016/j.jclepro.2018.02.300 ↗
3. INSPIRE: Support for and requirement of the marine strategy framework directive10.1016/j.marpol.2018.02.020 ↗
4. Recent advances in hybrid organic-inorganic materials with spatial architecture for state-of-the-art applications10.1016/j.pmatsci.2020.100663 ↗
5. Chemical stability of synergistic inorganic materials for enhancing electrochemical performance10.1016/j.compscitech.2020.108383 ↗
6. Plasma electrolytic oxidation of Ti-25Nb-xTa alloys in solution containing Ca and P ions10.1016/j.surfcoat.2020.125916 ↗
7. Dual-functional crosslinked polymer-inorganic materials for robust electrochemical performance and antibacterial activity10.1016/j.cej.2019.123654 ↗
8. Superhydrophobic surfaces and coatings by electrochemical anodic oxidation and plasma electrolytic oxidation10.1016/j.cis.2020.102245 ↗
9. Fabrication of organic-inorganic hybrid materials on metal surface for optimizing electrochemical performance10.1016/j.jcis.2020.03.117 ↗
10. Influence of secondary phases of AlSi9Cu3 alloy on the plasma electrolytic oxidation coating formation process10.1016/j.jmst.2019.12.031 ↗
11. Analyses of hydrogen release on zirlo alloy anode during plasmaelectrolytic oxidation10.1016/j.matchemphys.2020.123054 ↗
12. Self-assembly of hierarchical N-heterocycles-inorganic materials into three-dimensional structure for superior corrosion protection10.1016/j.cej.2018.09.089 ↗
13. Tribological development of TiCN coatings by adjusting the flowing rate of reactive gases10.1016/j.jpcs.2015.11.009 ↗
14. Tribological properties in seawater for Ti/TiCN coatings on Ti6Al4V alloy by arc ion plating with different carbon contents10.1007/s12598-016-0802-8 ↗
15. Influence of ion energies on the structure, composition, and properties of multilayer Ti-Al-Si-N ion-plasma-deposited coatings10.1134/S1063785016050217 ↗
16. Elevated temperature tribological behavior of Ni based composites containing nano-silver and hBN10.1016/j.wear.2010.08.022 ↗
17. CrN-Ag self-lubricating hard coatings10.1016/j.surfcoat.2005.08.063 ↗
18. Mechanical and tribological properties of CrN/Ag and CrSiN/Ag nanoscale multilayers10.1016/j.surfcoat.2010.01.004 ↗
19. Corrosion behaviors of TiN and Ti-Si-N (with 2.9at.% and 5.0at.% Si) coatings by electrochemical impedance spectroscopy10.1016/j.tsf.2016.08.005 ↗
20. Influence of the negative bias in ion plating on the microstructural and tribological performances of Ti-Si-N coatings in seawater10.1016/j.surfcoat.2015.09.005 ↗
21. Preparation and tribocorrosion performance of CrCN coatings in artificial seawater on different substrates with different bias voltages10.1016/j.ceramint.2019.02.031 ↗
22. The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior10.1016/j.surfcoat.2014.01.010 ↗
23. Characterisation of Ti1−xSixNy nanocomposite films10.1016/S0257-8972(00)00947-6 ↗
24. Effects of bias voltage and temperature on mechanical properties of Ti-Si-N coatings deposited by a hybrid system of arc ion plating and sputtering techniques10.1016/S0040-6090(03)01085-X ↗
25. Ti-Si-C-N thin films grown by reactive arc evaporation from Ti3SiC2 cathodes10.1557/jmr.2011.10 ↗
26. A concept for the design of novel superhard coatings10.1016/0040-6090(95)06695-0 ↗
27. An analysis of macroparticle-related defects on CrCN and CrN coatings in dependence of the substrate bias voltage10.1016/j.vacuum.2011.04.023 ↗
28. Microstructure, stress and mechanical properties of arc-evaporated Cr-C-N coatings10.1016/S0040-6090(01)00759-3 ↗
29. Mechanical properties of superhard nanocomposites10.1016/S0257-8972(01)01467-0 ↗
30. Properties of TiSiN coatings deposited by hybrid HiPIMS and pulsed-DC magnetron co-sputtering10.1016/j.vacuum.2014.06.023 ↗
31. Structure-performance relations in nanocomposite coatings10.1016/S0257-8972(01)01389-5 ↗
32. Arc-evaporated CrN, CrN and CrCN coatings10.1016/j.vacuum.2008.05.005 ↗
33. Effect of substrate bias voltage on the properties of CrCN and CrN coatings deposited by cathodic arc evaporation10.1016/j.vacuum.2012.04.039 ↗
34. Electrochemical evaluation of corrosion and tribocorrosion behaviour of amorphous and nanocrystalline cobalt-tungsten electrodeposited coatings10.1016/j.matchemphys.2014.07.013 ↗
35. Corrosion and tribocorrosion behavior of Ti/TiN PVD coating on 316L stainless steel substrate in Ringer’s solution10.1016/j.matchemphys.2014.08.025 ↗
36. Corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys in artificial seawater10.1016/S1003-6326(14)63157-5 ↗
37. Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air10.1016/j.wear.2008.02.010 ↗
38. Influence of normal load and sliding speed on the tribological property of amorphous carbon nitride coatings sliding against Si3N4 balls in water10.1016/j.surfcoat.2007.12.025 ↗
39. Microstructure and properties of Ti-Si-N nanocomposite films10.1116/1.1508802 ↗
40. Study on the superhardness mechanism of Ti-Si-N nanocomposite films: Influence of the thickness of the Si3N4 interfacial phase10.1116/1.1821583 ↗
41. Crystallography of magnetron sputtered TiN coatings on steel substrates10.1016/j.vacuum.2006.09.018 ↗