journal article·2018-11-27Open access

Luminescence Properties of Co-Doped Eu3+, Bi3+ Lu2O3/Polyvinylpyrrolidone Films

Ángel de Jesús Morales-Ramírez, Margarita García-Hernández, Dulce Yolotzin Medina-Velázquez, María del Rosario Ruiz-Guerrero, Fernando Juárez-López, Joan Reyes-Miranda

Coatings· Volume 8· Issue 12

Abstract

The effect of the polyvinylpyrrolidone (PVP, MW = 130,000) molar content, PVP/Lu = 1, 2.5, 4 and 5; on the photoluminescent and structural properties of sol-gel derived Lu2O3:Eu3+, Bi3+ has been analyzed. Thin hybrid films were deposited by means of the dip-coating technique on silica quartz substrates. Films deposited at 700 °C presented a cubic structure, with non-preferential orientation, even with the presence of PVP. The photoluminescence (PL) spectrum and Comission Internationale de l’Éclairage (CIE) chromaticity diagram of films revealed a reddish Eu3+ emission at 612 nm (5D0 → 7F2) with an excitation at 320 nm of the Bi ions (6s2 → 6s6p), showing a highly-effective energy transfer process form Bi3+ to Eu3+ luminescent centers. On the other hand, the color temperature of the samples is strongly dependent on the PVP content, as a consequence of the observed difference on the branching ratios of 5D0 → 7FJ transitions of europium ions. Lifetime studies present two different behaviors for the thin films: A non-exponential nature for the lower PVP contents, and a simple exponential nature for the highest PVP one, showing that the PVP tends to promote a better dissolution of segregates and, therefore, increases the lifetime of the Eu3+ emission.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Lanthanide and Transition Metal Complexes · Optical properties and cooling technologies in crystalline materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Instituto Politécnico Nacional, ESIQIE, UPALM S/N Col. Lindavista, Gustavo A. Madero Cd. de México C.P. 07738, Mexico

Instituto Politécnico Nacional, CIITEC, UPALM S/N Col. Lindavista, Gustavo A. Madero Cd. de México C.P. 07738, Mexico

Tecnológico Nacional de México-Instituto Tecnológico de Ciudad Madero, CIP, Prol. Bahía del Aldair, Av. de las Bahías, Parque Industrial Tecnia, Altamira Tamaulipas C.P. 89600, Mexico

Universidad Autónoma Metropolitana, Departamento de Materiales, Ciencias Básicas e Ingeniería. Av. San Pablo No. 180, Col. Reynosa Tamaulipas, Cd. de México C.P. 02200, Mexico

Funding

Consejo Nacional de Ciencia y Tecnología

References (56)

Show source-provided references
1. Polymer-based approach in ceramic materials processing for energy device applications
2. Organic-inorganic hybrid functional materials: An integrated platform for applied technologies10.1149/2.0191808jes ↗
3. Inoganic-organic-hybrids as precursors to functional materials10.1016/S1466-6049(01)00103-9 ↗
4. Müller, K., Bugnicourt, E., Latorre, M., Jorda, M., Echegoyen Sanz, Y., Lagaron, J., Miesbauer, O., Bianchin, A., Hankin, S., and Bölz, U. (2017). Review on the processing and properties of polymer nanocomposites and nanocoatings and their applications in the packaging, automotive and solar energy fields. Nanomaterials, 7.10.3390/nano7040074 ↗
5. Sol-gel synthesis of polymer-YSZ hybrid materials for SOFC technology10.1016/S0955-2219(03)00520-X ↗
6. Influence of polymerizing agent on structure and spectroscopic properties of nano-crystalline La0.8Sr0.2MnO3 powders10.1002/crat.201000224 ↗
7. Transition from anatase to rutile phase in titanium dioxide (TiO2) nanoparticles synthesized by complexing sol-gel process: Effect of kind of complexing agent and calcinating temperature10.1007/s10971-012-2940-2 ↗
8. Stress and cracks in gel-derived ceramic coatings10.1023/A:1020773415962 ↗
9. Fabrication of a PVP (polyvinylpyrrolidone)-assisted TiO2 film using a high-concentrated TiO2 nano sol and its optical properties10.2109/jcersj2.119.745 ↗
10. Ytterbium doped gadolinium oxide (Gd2O3:Yb3+) phosphor: Topology, morphology, and luminescence behaviour
11. Photoluminescence properties of sesquioxide doped ceria synthesized by modified sol-gel route10.1016/j.matlet.2011.01.004 ↗
12. Electrospinning synthesis and luminescent properties of Lu2O3:Eu3+ nanofibers10.1016/S1002-0721(10)60331-6 ↗
13. Facile synthesis and multicolor luminescent properties of uniform Lu2O3:Ln (Ln = Eu3+, Tb3+, Yb3+/Er3+, Yb3+/Tm3+, and Yb3+/Ho3+) nanospheres10.1016/j.jcis.2011.10.026 ↗
14. Homogeneously precipitated Lu2O3:Eu nanocrystalline phosphor for X-ray detection10.1016/j.snb.2005.03.006 ↗
15. Radioluminescence of Lu2O3:Eu nanocrystalline powder and vacuum-sintered ceramic10.1016/j.radmeas.2004.03.027 ↗
16. Synthesis and characterization of highly uniform Lu2O3:Ln3+ (Ln = Eu, Er, Yb) luminescent hollow microspheres10.1039/b924916h ↗
17. Luminescent properties of (Sr, Zn)Al2O4:Eu2+, Bi3+ particles as a potential green phosphor for UV LEDs10.1021/cm060003w ↗
18. Preparation and photoluminescence properties of Y2O3: Eu, Bi phosphors by molten salt synthesis for white light-emitting diodes10.1007/s10853-011-5508-6 ↗
19. Luminescence investigation of Eu3+–Bi3+ co-doped CaMoO4 phosphor10.1016/S1002-0721(10)60552-2 ↗
20. Low-temperature wet chemical precipitation of YVO4:Bi3+,Eu3+ nanophosphors via citrate precursors10.1016/j.pcrysgrow.2011.10.007 ↗
21. Luminescent properties of LuVO4: Bi3+, Eu3+ red phosphor for light-emitting diodes10.1166/jnn.2014.8008 ↗
22. Novel red phosphors for solid state lighting; The system BixLn1−xVO4; Eu3+/Sm3+(Ln = Y, Gd)10.1016/j.ssc.2004.03.050 ↗
23. Self-calibrated optical thermometer based on luminescence from SrLu2O4:Bi3+,Eu3+ phosphors10.1039/C8RA06358C ↗
24. How to design ultraviolet emitting persistent materials for potential multifunctional applications: A living example of a NaLuGeO4:Bi3+, Eu3+ phosphor10.1039/C6TC05598B ↗
25. Nanoscale fluoro-immuno assays with lanthanide oxide nanoparticles10.1117/12.571483 ↗
26. Biosensors for whole-cell bacterial detection10.1128/CMR.00120-13 ↗
27. Synthesis, structure and NIR luminescence properties of Yb3+ and Bi3+-activated vanadate GdVO410.1016/S1002-0721(16)60103-5 ↗
28. Enhancing solar cell efficiency using photon upconversion materials10.3390/nano5041782 ↗
29. Physical properties of sol-gel coatings10.1023/A:1008701903087 ↗
30. Preparation and antibacterial effects of Ag–SiO2 thin films by sol-gel method10.1016/S0142-9612(03)00415-0 ↗
31. Effect of heat-treatment temperature on the luminescent properties of Lu2O3:Eu film prepared by Pechini sol-gel method10.1016/j.apsusc.2004.09.069 ↗
32. The influence of Pr3+ co-doping on the luminescent properties of Lu2O3:5 mol % Eu films10.1016/j.jlumin.2011.01.004 ↗
33. Study on the properties of coating films prepared from metal alkoxides
34. Stress evolution on gel-to-ceramic thin film conversion10.1007/s10971-006-9213-x ↗
35. Optical properties of GdTaO4:Eu3+ thick films prepared from a PVP-containing solution10.1016/j.apsusc.2008.12.026 ↗
36. Li+ ion diffusion in LiMn2O4 thin film prepared by PVP sol-gel method10.1016/j.jpowsour.2005.07.050 ↗
37. Eu3+, Bi3+ codoped Lu2O3 nanopowders: Synthesis and luminescent properties10.1557/jmr.2013.91 ↗
38. Infrared and TPD Studies of nitrate adsorbed on Tb4O7, La2O3, BaO, and MgO/γ-Al2O310.1021/jp993894m ↗
39. Study on the Interaction between polyvinylpyrrolidone and platinum metals during the formation of the colloidal metal nanoparticles10.1142/S0256767908002625 ↗
40. Infrared absorption study of metal oxides in the low frequency region (700–240 cm−1)10.1016/0371-1951(64)80079-5 ↗
41. Polyvinylpyrrolidone (PVP) in nanoparticle synthesis10.1039/C5DT02964C ↗
42. Polyvinylpyrrolidone assisted sol-gel route LiCo1/3Mn1/3Ni1/3PO4 composite cathode for aqueous rechargeable battery10.1016/j.electacta.2011.11.028 ↗
43. Photoluminescent and electroluminescent characteristics of various Bi-activated niobate-based oxide phosphor thin films10.1016/j.tsf.2009.04.064 ↗
44. Effect of concentration on the luminescence of Eu3+ ions in nanocrystalline La2O310.1016/j.jlumin.2006.09.001 ↗
45. Characterization of europium doped lanthanum oxide films prepared by spray pyrolysis10.1016/j.jnoncrysol.2011.07.021 ↗
46. Phase transition, structure and luminescence of Eu:YAG nanophosphors by co-precipitation method10.1016/j.jallcom.2008.02.045 ↗
47. Interpretation of europium (III) spectra10.1016/j.ccr.2015.02.015 ↗
48. Energy transfer from Bi3+ to Eu3+ triggers exceptional long-wavelength excitation band in ZnWO4:Bi3+, Eu3+ phosphors10.1039/c3tc31160k ↗
49. A novel greenish yellow-orange red Ba3Y4O9:Bi3+, Eu3+ phosphor with efficient energy transfer for UV-LEDs10.1039/C5DT03565A ↗
50. Analytical study of thermal annealing behaviour of erbium emission in Er2O3-sol–gel silica films10.1088/0022-3727/44/31/315401 ↗
51. Effect of annealing treatments on photoluminescence and charge storage mechanism in silicon-rich SiNx:H films10.1186/1556-276X-6-178 ↗
52. The C.I.E. colorimetric standards and their use10.1088/1475-4878/33/3/301 ↗
53. Cathodoluminescence of rare-earth-doped zinc aluminate films10.1016/j.tsf.2003.11.294 ↗
54. Electronic energy levels of the trivalent lanthanide aquo ions. III. Tb3+10.1063/1.1669895 ↗
55. Preparation and luminescent properties of europium-activated YInGe2O7 phosphors10.1016/j.jallcom.2007.05.060 ↗
56. Influence of energy transfer by the exchange mechanism on donor luminescence10.1063/1.1697063 ↗