Enhanced Compatibility of Secondary Waste Carbon Fibers through Surface Activation via Nanoceramic Coating in Fiber-Reinforced Cement Mortars
Source abstract
Abstract
The utilization of waste fibers in the production of reinforced concrete materials offers several advantages, including reducing environmental strain and socio-economic impacts associated with composite waste, as well as enhancing material performance. This study focuses on the development of cementitious mortars using secondary waste carbon fibers, which are by-products derived from the industrial conversion of recycled fibers into woven/non-woven fabrics. The research primarily addresses the challenge of achieving adequate dispersion of these recycled fibers within the matrix due to their agglomerate-like structure. To address this issue, a deagglomeration treatment employing nanoclay conditioning was developed. The functionalization with nanoclay aimed to promote a more uniform distribution of the reinforcement and enhance compatibility with the cementitious matrix. Various fiber weight percentages (ranging from 0.5 w/w% to 1 w/w% relative to the cement binder) were incorporated into the fiber-reinforced mix designs, both with and without nanoceramic treatment. The influence of the reinforcing fibers and the compatibility effects of nanoclay were investigated through a comprehensive experimental analysis that included mechanical characterization and microstructural investigation. The effectiveness of the nanoceramic conditioning was confirmed by a significant increase in flexural strength performance for the sample incorporating 0.75 w/w% of waste fibers, surpassing 76% compared to the control material and exceeding 100% compared to the fiber-reinforced mortar incorporating unconditioned carbon fibers. Furthermore, the addition of nanoclay-conditioned carbon fibers positively impacted compression strength performance (+13% as the maximum strength increment for the mortar with 0.75 w/w% of secondary waste carbon fibers) and microstructural characteristics of the samples. However, further investigation is required to address challenges related to the engineering properties of these cementitious composites, particularly with respect to impact resistance and durability properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering, Materials, Environment, Sapienza University of Rome, 00184 Rome, Italy
INSTM Reference Laboratory for Engineering of Surface Treatments, UdR Rome, Sapienza University of Rome, 00184 Rome, Italy
Department of Civil and Environmental Engineering, Brunel University, London UB8 3PH, UK
Applied Science Research Center, Applied Science Private University, Amman 11937, Jordan
Funding
Avvio alla Ricerca—Tipo 2
References (53)
Show source-provided references
1. The recent progress of recycled steel fiber reinforced concrete10.1016/j.conbuildmat.2019.117232 ↗
2. Concrete reinforcement with recycled fibers10.1061/(ASCE)0899-1561(2000)12:4(314) ↗
3. Recycled fibers in reinforced concrete: A systematic literature review10.1016/j.jclepro.2019.119207 ↗
4. Mechanical properties and fracture prediction of concretes containing oil palm shell and expanded clay for full replacement of conventional aggregates10.11113/jurnalteknologi.v84.17485 ↗
5. Lee, Y.H., Chua, N., Amran, M., Lee, Y.Y., Hong Kueh, A.B., Fediuk, R., Vatin, N., and Vasilev, Y. (2021). Thermal Performance of Structural Lightweight Concrete Composites for Potential Energy Saving. Crystals, 11.10.3390/cryst11050461 ↗
6. Acoustical and mechanical characteristics of mortars with pineapple leaf fiber and silica aerogel infills–Measurement and modeling10.1016/j.mtcomm.2023.105540 ↗
7. Degradation mechanisms of natural fiber in the matrix of cement composites10.1016/j.cemconres.2015.02.019 ↗
8. Water permeability and chloride and sulphate resistance of rubberised fibre mortar
9. Zia, A., Pu, Z., Holly, I., Umar, T., Tariq, M.A.U.R., and Sufian, M. (2022). A Comprehensive Review of Incorporating Steel Fibers of Waste Tires in Cement Composites and Its Applications. Materials, 15.10.3390/ma15217420 ↗
10. Signorini, C., and Volpini, V. (2021). Mechanical Performance of Fiber Reinforced Cement Composites Including Fully-Recycled Plastic Fibers. Fibers, 9.10.3390/fib9030016 ↗
11. Małek, M., Jackowski, M., Łasica, W., Kadela, M., and Wachowski, M. (2021). Mechanical and Material Properties of Mortar Reinforced with Glass Fiber: An Experimental Study. Materials, 14.10.3390/ma14030698 ↗
12. Glass and carbon fiber reinforced polymer composite wastes in pervious concrete: Material characterization and lifecycle assessment10.1016/j.resconrec.2022.106304 ↗
13. Sakai, A., Kurniawan, W., and Kubouchi, M. (2023). Recycled Carbon Fibers with Improved Physical Properties Recovered from CFRP by Nitric Acid. Appl. Sci., 13.10.3390/app13063957 ↗
14. Evaluation of mechanical properties and pyrolysis products of carbon fibers recycled by microwave pyrolysis10.1021/acsomega.1c06652 ↗
15. Recycled carbon fiber composites become a reality10.1016/j.repl.2017.11.012 ↗
16. Microstructural changes and mechanical performance of cement composites reinforced with recycled carbon fibers10.1016/j.cemconcomp.2021.104069 ↗
17. Serna, P., Llano-Torre, A., Martí-Vargas, J.R., and Navarro-Gregori, J. (2021). Fibre Reinforced Concrete: Improvements and Innovations, Springer. RILEM, Bookseries.10.1007/978-3-030-58482-5 ↗
18. Li, Y.-F., Li, J.-Y., Ramanathan, G.K., Chang, S.-M., Shen, M.-Y., Tsai, Y.-K., and Huang, C.-H. (2021). An Experimental Study on Mechanical Behaviors of Carbon Fiber and Microwave-Assisted Pyrolysis Recycled Carbon Fiber-Reinforced Concrete. Sustainability, 13.10.3390/su13126829 ↗
19. Sustainable use of recycled carbon fiber reinforced polymer and crumb rubber in concrete: Mechanical properties and ecological evaluation10.1016/j.jclepro.2020.123624 ↗
20. Sambucci, M., and Valente, M. (2021). Ground Waste Tire Rubber as a Total Replacement of Natural Aggregates in Concrete Mixes: Application for Lightweight Paving Blocks. Materials, 14.10.3390/ma14247493 ↗
21. Effect of acid treatment on surface properties evolution of attapulgite clay: An application of inverse gas chromatography10.1016/j.colsurfa.2011.09.031 ↗
22. Preparation, characterization, application and structure evolution of attapulgite: From nanorods to nanosheets10.1016/j.apsusc.2021.150398 ↗
23. Orientation dynamics of anisotropic and polydisperse colloidal suspensions10.1063/5.0101702 ↗
24. Effect of calcined nanoclay on microstructural and mechanical properties of chemically treated hemp fabric-reinforced cement nanocomposites10.1016/j.conbuildmat.2015.07.145 ↗
25. Properties of cement-based materials incorporating nano-clay and calcined nano-clay: A review10.1016/j.conbuildmat.2021.122820 ↗
26. Lightweight alkali-activated materials and ordinary Portland cement composites using recycled polyvinyl chloride and waste glass aggregates to fully replace natural sand10.1016/j.conbuildmat.2023.130399 ↗
27. Boosting Portland cement-free composite performance via alkali-activation and reinforcement with pre-treated functionalised wheat straw10.1016/j.indcrop.2022.114648 ↗
28. Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.5010.1016/j.conbuildmat.2014.09.012 ↗
29. (2002). American Society for Testing and Materials. Flexural Strength of Hydraulic-Cement Mortars. Standard No. ASTM C348-02.
30. (2016). American Society for Testing and Materials. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or Cube Specimens). Standard No. ASTM C109/C109M-02.
31. Benign reduction of carbon nanotube agglomerates using a supercritical carbon dioxide process10.1007/s00339-014-8791-7 ↗
32. Influences of molding processes and different dispersants on the dispersion of chopped carbon fibers in cement matrix10.1016/j.heliyon.2018.e00868 ↗
33. Carbon fibre surface modification using functionalized nanoclay: A hierarchical interphase for fibre-reinforced polymer composites10.1016/j.compscitech.2017.05.013 ↗
34. Thermal stability of graphite oxide10.1016/j.cplett.2009.01.050 ↗
35. Effect of surfactant types and their concentration on the structural characteristics of nanoclay10.1016/j.saa.2013.11.076 ↗
36. Effects of surface structure and morphology of nanoclays on the properties of jatropha curcas oil-based waterborne polyurethane/clay nanocomposites10.1021/acs.iecr.6b02527 ↗
37. Development of natural rubber-fibrous nano clay attapulgite composites: The effect of chemical treatment of filler on mechanical and dynamic mechanical properties of composites10.1016/j.proche.2012.06.019 ↗
38. Evaluation of carbon fiber dispersion in cement-based materials using mechanical properties, conductivity, mass variation coefficient, and microstructure10.1016/j.conbuildmat.2020.120891 ↗
39. A review on durability of basalt fiber reinforced concrete10.1016/j.compscitech.2022.109519 ↗
40. Mobili, A., Giosuè, C., Bellezze, T., Revel, G.M., and Tittarelli, F. (2021). Gasification Char and Used Foundry Sand as Alternative Fillers to Graphene Nanoplatelets for Electrically Conductive Mortars with and without Virgin/Recycled Carbon Fibres. Appl. Sci., 11.10.3390/app11010050 ↗
41. Carbon fiber surface nano-modification and enhanced mechanical properties of fiber reinforced cementitious composites10.1016/j.conbuildmat.2023.130701 ↗
42. Commercial and recycled carbon/steel fibers for fiber-reinforced cement mortars with high electrical conductivity10.1016/j.cemconcomp.2020.103569 ↗
43. Raza, S.S., Fahad, M., Ali, B., Amir, M.T., Alashker, Y., and Elhag, A.B. (2022). Enhancing the Performance of Recycled Aggregate Concrete Using Micro-Carbon Fiber and Secondary Binding Material. Sustainability, 14.10.3390/su142114613 ↗
44. Low-drying-shrinkage concrete containing carbon fibers10.1016/1359-8368(95)00020-8 ↗
45. Effect of aspect ratio on strain sensing capacity of carbon fiber reinforced cement composites10.1016/j.matdes.2013.05.010 ↗
46. Mallick, P.K. (2007). Manufacturing and Design, Marcel Dekker Inc.
47. Performance evaluation of high-strength concrete reinforced with basalt fibers exposed to elevated temperatures10.1016/j.jobe.2020.102108 ↗
48. Molecular dynamics simulation study on dynamic mechanical properties of CSH with diverse Ca/Si ratios10.1016/j.mtcomm.2022.103755 ↗
49. Study of optimizing graphene oxide dispersion and properties of the resulting cement mortars10.1016/j.conbuildmat.2020.119477 ↗
50. O’Neil, E.F., Cummins, T.K., Durst, B.P., Kinnebrew, P.G., Boone, R.N., and Torres, R.X. (2006). Development of very-high-strength and high-performance concrete materials for improvement of barriers against blast and projectile penetration. Transform. Sci. Technol. Curr. Future Force, 203–210.10.1142/9789812772572_0026 ↗
51. The mechanical properties and microstructure of carbon fibers reinforced coral concrete10.1016/j.conbuildmat.2020.118771 ↗
52. Effect of nano-clay de-agglomeration on mechanical properties of concrete10.1016/j.conbuildmat.2019.02.018 ↗
53. The impact of nano clay on normal and high-performance concrete characteristics: A review10.1088/1755-1315/961/1/012085 ↗