Two-Layer Heat-Resistant Protective Coatings for Turbine Engine Blades

One of the most important factors for increasing the durability of turbine engines is the use of turbine blades characterized by the best possible convergence of the thermophysical properties of the protective coating and the base material of the blade. The aim of the research was to evaluate the heat resistance of prototype two-layer protective coatings applied to turbine blades. The inner layer of the coating enables shaping the thermophysical convergence of the coating and the base material of the blade. The outer layer is used for thermal protection of the blade material. The inner layer was applied to the blade by plasma spraying, and the outer layer was diffusion aluminized for the first type by a non-contact gas method, for the second type by a slurry method, and for the third type, the ceramics were plasma sprayed. Turbine blades with prototype coatings were subjected to an engine test, and after the test, macro- and microstructure tests were performed. The tests showed that the prototype protective coating with an inner layer of the MCrAlY type applied to the blade by plasma spraying and an outer layer aluminized by diffusion by a non-contact gas method protects the blade material against oxidation and ensures its thermal insulation.