Study of the Passivation Film on S32750 Super-Duplex Stainless Steel Exposed in a Simulated Marine Atmosphere
Source abstract
Abstract
The corrosion behavior and passivation mechanism of S32750 super-duplex stainless steel exposed in a simulated marine atmosphere were studied using electrochemical methods, XPS and SEM. Passivation and local corrosion occurred on the metal surface when S32750 SDSS was exposed in the simulated marine atmospheric environment. The passivation film is composed of two chromium-enriched layers. The outer layer is a very thin film at the metal/atmosphere interface of the specimen surface with higher chromium content, whereas the chromium in the inner layer seems a little depleted. The outer and inner layers had similar Fe components, and Fe3+ oxide/hydroxide was the primary oxide in the film. The outer layer contains CrO3, whereas the inner layer has Cr3+ as its primary oxide. Pitting occurred when exposure time exceeded 24 d, and the Cr content of the specimen decreased. Therefore, S32750 SDSS exposed for 24 d exhibited the best corrosion resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
Yongxing Special Stainless Steel Co., Ltd., Huzhou 313005, China
Funding
Key research and development program of Zhejiang province
References (36)
Show source-provided references
1. Effects of deep cold rolling on the evolution of microstructure, microtexture, and mechanical properties of 2507 duplex stainless steel10.1016/j.msea.2022.143224 ↗
2. Enhancement in mechanical properties and corrosion resistance of 2507 duplex stainless steel via friction stir processing10.1016/j.jmrt.2020.05.057 ↗
3. Huang, F.F., Liu, E.J., Qin, Y., Wang, Q.R., Jin, Y., Wen, L., and Chang, H. (2022). A Study of Multi-Pass Laser-Cladding 2205 Duplex StainlessSteel Coating: Microstructure, Electrochemical Corrosion Behavior, and Wear-Resistance Properties. Coatings, 12.10.3390/coatings12020229 ↗
4. Simultaneously enhanced strength-ductility synergy and corrosion resistance in submerged friction stir welded super duplex stainless steel joint via creating ultrafine microstructure10.1016/j.jmatprotec.2022.117660 ↗
5. Effect of annealing temperature onthe pitting corrosion resistance of super duplex stainless UNS S3275010.1016/j.matchar.2009.04.009 ↗
6. Corrosion of steel under the defected coatingstudied by localized electrochemical impedance spectroscopy10.1016/j.electacta.2008.02.014 ↗
7. Corrosion behaviour of 2205 duplex stainless steel in marine conditions containing Erythrobacter pelagi bacteria10.1016/j.matchemphys.2019.122010 ↗
8. Stress corrosion cracking of LDX 2101® duplex stainless steel in chloridesolutions in the presence of thiosulphate10.1016/j.corsci.2013.11.028 ↗
9. Investigation on the effect of nitrate ion on the critical pittingtemperature of 2205 duplex stainless steel along a mechanistic approachusing pencil electrode10.1016/j.corsci.2014.04.021 ↗
10. Effect of microstructure and passive film on corrosion resistance of 2507 super duplex stainless steel prepared by different cooling methods in simulated marine environment10.1007/s12613-020-2094-0 ↗
11. Effect of dissolved oxygen on electrochemical corrosion behavior of 2205 duplex stainless steel in hot concentrated seawater10.1016/j.jmst.2020.06.030 ↗
12. Study on the correlation between passive film and AC corrosion behavior of 2507 super duplex stainless steel in simulated marine environment10.1016/j.jelechem.2020.114072 ↗
13. Abdo, H.S., Seikh, A.H., Samad, U.A., Fouly, A., and Mohammed, J.A. (2021). Electrochemical Corrosion Behavior of Laser Welded 2205 Duplex Stainless-Steel in Artificial Seawater Environment under Different Acidity and Alkalinity Conditions. Crystals, 11.10.3390/cryst11091025 ↗
14. Effect of inorganic anions on the corrosion behavior of UNS S32750 duplex stainless steel in chloride solution10.1002/maco.201408185 ↗
15. Microstructure and Corrosion Studies on Different Zones of Super Duplex Stainless Steel UNS S32750, Weldment10.3389/fmats.2020.00251 ↗
16. On the role of Cr in the passivity of stainless steel10.1149/1.2108450 ↗
17. Electrochemical and XPS studies of the passivefilm formed on stainless steels in borate bufferand chloride solutions10.1016/j.corsci.2006.11.001 ↗
18. Passivation behavior and surface chemistry of 2507 super duplex stainlesssteel in artificial seawater: Influence of dissolved oxygen and pH10.1016/j.corsci.2019.02.002 ↗
19. Microstructure evolution and pitting corrosion behavior of UNSS32750 super duplex stainless steel welds after short-time heattreatment10.1016/j.corsci.2017.02.006 ↗
20. Electrochemical corrosion characteristics of type 316L stainless steelin hot concentrated seawater10.1016/j.corsci.2013.12.004 ↗
21. Environmental factors affecting pitting corrosion of type 304 stainlesssteel investigated by electrochemical noise measurements underpotentiostatic control10.1016/j.corsci.2013.06.005 ↗
22. Corrosion resistances and passivation of powder metallurgicaland conventionally cast 316L and 2205 stainless steels10.1016/j.corsci.2012.10.021 ↗
23. Corrosion and metallurgical investigation of two supermartensiticstainless steels for oil and gas environments10.1016/j.corsci.2013.12.015 ↗
24. Stability, reactivity and breakdown of passive films. Problems of recent and future research10.1016/S0013-4686(00)00347-9 ↗
25. Influence of thermal aging on sulfate-reducing bacteria (SRB)-influenced corrosion behavior of 2205 duplex stainless steel10.1016/j.corsci.2008.03.009 ↗
26. EIS assessment of critical pitting temperature of 2205 duplex stainlesssteel in acidified ferric chloride solution10.1016/j.corsci.2013.11.023 ↗
27. In situ investigation of crevice corrosion on UNS S32101 duplex stainlesssteel in sodium chloride solution10.1016/j.corsci.2013.06.039 ↗
28. Duplex stainless steel passive film electrical properties studied by in situcurrent sensing atomic force microscopy10.1016/j.corsci.2013.08.031 ↗
29. Passive properties of lean duplex stainless steels after long-term ageing in airstudied using EBSD, AES, XPS and local electrochemical impedance spectroscopy10.1016/j.corsci.2012.10.009 ↗
30. Study on the passive film formed on 2205 stainless steelin acetic acid by AAS and XPS10.1016/S1674-4799(09)60029-7 ↗
31. Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications1. Standard No. ASTM A240/A240M−19 Standard.
32. Brett, C.M.A., and Brett, A.M. (1993). Electrochemistry Principles, Methods and Application, Oxford University Press.
33. Macdonald, J.R. (1987). Impedance Spectroscopy-Emphesizing Solid Materials and Systems, John Wiley& Sons. Chapters 1–4.
34. EIS and XPS study of surface modi_cation of205LVM stainless steel after passivation10.1016/S0010-938X(98)00122-X ↗
35. The influence of temperature on the passivation behavior of a super duplex stainless steel in a boric-borate buffer solution10.1016/S0010-938X(97)00101-7 ↗
36. Influence of Cr and Mo on the passivation of stainless steel430 (18Cr) and 444 (18Cr–2Mo): In situ XANES study10.1016/S0168-583X(02)01548-3 ↗