Research Status of Aluminum Base Coating on Titanium Alloy
Source abstract
Abstract
At present, in the aviation industry, titanium alloy is mainly used to manufacture parts such as compressor discs, blades, and the casings of aircraft engines. When titanium alloys are in service, high temperature is generated due to high-speed running friction, which requires them to have high-temperature oxidation resistance and friction resistance. If they are used in an environment with salt corrosion, titanium alloys will face thermal corrosion, which limits their wider practical applications. At present, there are many methods to protect titanium alloys. This paper mainly includes alumina-based coatings and some preparation methods. The characteristics and functional mechanisms of three functional coatings for the service environment, namely highly temperature-resistant alumina-based coating, thermal corrosion-resistant alumina-based coating, and wear-resistant alumina-based coating, are summarized. Finally, the development direction of composite coatings of titanium and titanium alloys for a complex service environment is suggested.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China
Funding
Science and Technology Project of the Education Department of Hunan Province · Hunan Provincial Natural Science Foundation of China · College Students’ Innovation and Entrepreneurship training program of Xiangtan University
References (89)
Show source-provided references
1. A review on combustion behavior and mechanism of Ti alloys for advanced aero-engine10.1016/j.jallcom.2023.170584 ↗
2. Microstructure and high-temperature oxidation resistance of Ti-Al-Nb coatings on a Ti-6Al-4V alloy fabricated by laser surface alloying10.1016/j.surfcoat.2018.03.060 ↗
3. High-temperature oxidation performance of laser-cladded amorphous TiNiSiCrCoAl high-entropy alloy coating on Ti-6Al-4V surface10.1016/j.surfcoat.2022.128123 ↗
4. Preparation of PEO ceramic coating on Ti alloy and its high temperature oxidation resistance10.1016/j.cap.2009.09.003 ↗
5. Effect of hot-dip aluminizing on the oxidation resistance of Ti–6Al–4V alloy at high temperatures10.1016/j.corsci.2011.10.029 ↗
6. NaCl-induced hot corrosion of a titanium aluminide alloy10.1016/0921-5093(95)03345-9 ↗
7. Simultaneously improving mechanical, thermal, and anti-wear properties of Ti alloys using 3D-networked graphene as reinforcement10.1016/j.carbon.2023.118152 ↗
8. The Si influence on the microstructure and oxidation resistance of Ti-Al slurry coatings on Ti-48Al-2Cr-2Nb alloy10.1016/j.materresbull.2021.111336 ↗
9. Formation of Ti-Al intermetallics on a surface of titanium by non-vacuum electron beam treatment10.1016/j.matchar.2017.10.024 ↗
10. High performance coatings for titanium alloys to protect against oxidation10.1016/S0257-8972(00)01137-3 ↗
11. Formation of nickel aluminide coating on γ-TiAl alloy10.1016/S0966-9795(03)00083-9 ↗
12. Recent trends in laser cladding and surface alloying10.1016/j.optlastec.2020.106619 ↗
13. Optimization of microstructure and properties of composite coatings by laser cladding on titanium alloy10.1016/j.ceramint.2020.09.063 ↗
14. Some aspects of laser surface cladding in the turbine industry10.1016/S0257-8972(00)00735-0 ↗
15. Developments in laser-based surface engineering processes: With particular reference to protection against cavitation erosion10.1016/j.surfcoat.2016.02.019 ↗
16. Moradnia, M., Pouladi, S., Aqib, M., and Ryou, J.-H. (2022). Thermodynamic Analysis of Group-III-Nitride Alloying with Yttrium by Hybrid Chemical Vapor Deposition. Nanomaterials, 12.10.3390/nano12224053 ↗
17. Gas-phase aluminizing of HP40Nb steel used in reformer tubes: Synthesis, characterization, and its implications for the microstructure and high-temperature creep resistance of the base alloy10.1016/j.ijpvp.2022.104833 ↗
18. High temperature oxidation behavior of aluminide coatings applied on HP-MA heat resistant steel using a gas-phase aluminizing process10.1016/j.surfcoat.2022.128181 ↗
19. Hot corrosion of yttrium-modified aluminide coatings
20. Liquid-phase siliconizing by Al–Si alloys at the surface of a TiAl-based alloy and improvement in oxidation resistance10.1016/j.actamat.2004.02.008 ↗
21. Improvement of high temperature oxidation and corrosion resistance of superalloy IN-738LC by pack cementation10.1016/j.surfcoat.2003.10.011 ↗
22. A study of aluminide coatings on TiAl alloys by the pack cementation method10.1016/S0921-5093(02)00197-1 ↗
23. Oxidation-Resistant Aluminide Coatings on γ-TiAl10.1023/A:1023035809950 ↗
24. Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment10.1016/S0921-5093(02)00053-9 ↗
25. Effect of Ni, Si and Cr in the structural formation of diffusion aluminide coatings on commercial-purity titanium10.1016/j.surfcoat.2005.11.125 ↗
26. Microstructure and oxidation behaviour of TiAlSi coatings on TiAlCrNb alloy
27. Simultaneous Aluminizing and Chromizing of Steels to Form (Fe, Cr)3Al Coatings10.1023/A:1018870105824 ↗
28. A design of self-generated Ti–Al–Si gradient coatings on Ti–6Al–4V alloy based on silicon concentration gradient10.1016/j.jallcom.2020.154670 ↗
29. Microstructure and mechanical properties of orthorhombic alloys in the Ti-Al-Nb system10.1016/S0966-9795(98)00044-2 ↗
30. Microstructural aspects of plain aluminide and Pt-aluminide coatings on Ti-base alloy IMI-83410.1016/j.intermet.2005.02.006 ↗
31. Tailoring microstructure and mechanical performance of the TC4 titanium alloy brazed joint through doping rare-earth element Dy into Ti-Cu-Ni filler alloy10.1016/j.jmapro.2019.12.044 ↗
32. On the formation of interfacial and internal voids in α-Al2O3 scales10.1007/BF01670505 ↗
33. Wang, Z.H., Li, F.G., Hu, X.Y., He, W., Liu, Z., and Tan, Y. (2022). Preparation of Ti-Al-Si Gradient Coating Based on Silicon Concentration Gradient and Added-Ce. Coatings, 12.10.3390/coatings12050683 ↗
34. The metallurgy of zinc-coated steel10.1016/S0079-6425(98)00006-1 ↗
35. Thermal oxidation behavior of commercial purity titanium at high temperature
36. The comparison of thermal oxidation kinetics for pure titanium and titanium alloy
37. Oxidation behavior and microstructural evolution of hot-dipped aluminum coating on Ti-6Al-4V alloy at 800 °C10.1016/j.surfcoat.2013.09.023 ↗
38. Effect of Al–Si coating fusing time on the oxidation resistance of Ti–6Al–4V alloy10.1016/j.msea.2007.01.083 ↗
39. Oxidation behavior of a high Si content Al–Si composite coating fabricated on Ti–6Al–4V substrate by mechanical alloying method10.1016/j.jallcom.2017.01.078 ↗
40. Low oxygen pressure self-fused Al-Cr coatings formed on surface of Ti alloy and their oxidation resistance
41. A new way to produce Al + Cr coating on Ti alloy by vacuum fusing method and its oxidation resistance10.1016/j.msea.2006.05.101 ↗
42. Microstructure and properties of Ti-Al coating and Ti-Al-Si system coatings on Ti-6Al-4V fabricated by laser surface alloying10.1016/j.surfcoat.2016.10.082 ↗
43. Synthesis of Ti–Si–Al coatings on the surface of Ti–6Al–4V alloy via hot dip siliconizing route10.1016/j.surfcoat.2018.01.037 ↗
44. Long-term oxidation behavior of silicon-aluminizing coating with an in-situ formed Ti5Si3 diffusion barrier on γ-TiAl alloy10.1016/j.apsusc.2022.152444 ↗
45. Zeng, S.Q., and Li, F.G. (2023). Study on the Influence Law of Ce on Microstructure and High-Temperature Oxidation Resistance of Ti-Al-Si Composite Coating. Coatings, 13.10.20944/preprints202306.1680.v1 ↗
46. Effects of Microstructure and Rare-Earth Constituent on the Oxidation Behavior of Ti–5.6Al–4.8Sn–2Zr–1Mo–0.35Si–0.7Nd Titanium Alloy10.1007/s11085-013-9445-4 ↗
47. Improvement of cyclic oxidation resistance of Y-containing Ti–6Al–2.5Sn–4Zr–0.7Mo–0.3Si alloys10.1016/j.jallcom.2014.11.076 ↗
48. Microalloying effects of Ho on microstructure evolution and high temperature properties of Ti46Al4Nb1Mo alloy10.1016/j.intermet.2020.106883 ↗
49. Effect of minor Sc modification on the high-temperature oxidation behavior of near-α Ti alloy10.1016/j.corsci.2023.111122 ↗
50. Effect of pre-oxidation on aluminized coating and their oxidation resistance of Ti alloy10.1016/j.matlet.2005.09.003 ↗
51. Mechanisms of formation of diffusion aluminide coatings on nickel-base superalloys10.1007/BF00604047 ↗
52. Evolution of aluminide coating microstructure on nickel-base cast superalloy CM-247 in a single-step high-activity aluminizing process10.1007/s11661-998-0042-0 ↗
53. Corrosion of Silicon-Based Ceramics in Combustion Environments10.1111/j.1151-2916.1993.tb03684.x ↗
54. Hot corrosion ofα-SiC ceramics by V2O5 melt10.1007/BF01045359 ↗
55. Laboratory tests for hot-corrosion studies10.1179/mst.1986.2.3.262 ↗
56. Development of gradient thermal barrier coatings and their hot-fatigue behavior10.1016/S0257-8972(00)00695-2 ↗
57. Characterization of chemical and microstructural evolutions of a NiPtAl bondcoat during high temperature oxidation10.1016/j.surfcoat.2006.07.251 ↗
58. Oxidation resistance and corrosion behavior of hot-dip aluminized coatings on commercial-purity titanium10.1016/j.surfcoat.2011.08.042 ↗
59. The high temperature corrosion of a commercial aluminide coating on IN738-LC and MarMOO2 at 700 °C and 830 °C10.1016/0010-938X(85)90032-0 ↗
60. Electrochemical study on hot corrosion of Si-modified aluminide coated In-738LC in Na2SO4–20 wt.% NaCl melt at 750 °C10.1016/S0010-938X(02)00127-0 ↗
61. Surface and interface segregation in β-NiAl with and without Pt addition10.1016/j.scriptamat.2005.10.065 ↗
62. Diffusion characteristics and structural stability of Pt modified β-NiAl/γ′-Ni3Al within NiCoCrAl alloy at high temperature10.1016/j.apsusc.2019.01.232 ↗
63. Alumina growth behaviour on the surface-modified NiCoCrAl alloy by Pt and Hf at high temperature10.1016/j.apsusc.2019.02.179 ↗
64. High-resolution, real-time three-dimensional shape measurement10.1117/1.2402128 ↗
65. Sulphidation Behavior of a Non Harmful Water-Based Al and Al–Si Slurry Coating on CM247 Superalloy10.1007/s11085-013-9412-0 ↗
66. Oxidation behaviour of the nickel-based superalloy DZ125 hot-dipped with Al coatings doped by Si10.1016/j.corsci.2016.07.020 ↗
67. Microstructure and oxidation behavior of Al + Si co-deposited coatings on nickel-based superalloys10.1016/j.surfcoat.2014.09.003 ↗
68. Cyclic oxidation behaviour of Co/Si co-doped β-NiAl coating on nickel based superalloys10.1016/j.corsci.2018.01.032 ↗
69. A comparative study of four modified Al coatings on Ni3Al-based single crystal superalloy10.1016/S1002-0071(12)60089-6 ↗
70. The effect of silicon on the oxidation behavior of NiAlHf coating system10.1016/j.apsusc.2013.01.189 ↗
71. The oxidation of Ni3Al containing decomposed SiC-particles10.1016/S0966-9795(00)00092-3 ↗
72. The effect of Nb and Si on the hot corrosion behaviors of TiAl coatings on a Ti-6Al-4V alloy10.1016/j.corsci.2020.108578 ↗
73. Effect of Al -Y gradient coating on hot corrosion resistance of γ-TiAl alloy at different temperatures10.1016/j.apsusc.2019.05.168 ↗
74. Improving hot corrosion resistance of aluminized TiAl alloy by anodization and pre-oxidation10.1016/S1003-6326(20)65487-5 ↗
75. Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating10.1016/j.wear.2007.01.045 ↗
76. Dry sliding wear mechanisms of the Ti6Al4V alloy10.1016/S0043-1648(96)07454-6 ↗
77. Friction and wear of ceramics10.1016/0043-1648(84)90020-6 ↗
78. Enhanced wear resistance of titanium surfaces by a new thermal oxidation treatment10.1016/S0043-1648(99)00359-2 ↗
79. Phase transitions in reactive formation of Ti5Si3/TiAl in situ composites10.1007/s11661-000-0018-1 ↗
80. Formation and subsequent phase evolution of metastable Ti-Al alloy coatings by kinetic spraying of gas atomized powders10.1016/j.surfcoat.2017.02.053 ↗
81. Microstructure and wear resistance of compositionally graded Ti Al intermetallic coating on Ti6Al4V alloy fabricated by laser powder deposition10.1016/j.surfcoat.2018.08.067 ↗
82. Microstructure and tribological properties of laser in-situ synthesized Ti3Al composite coating on Ti-6Al-4V10.1016/j.surfcoat.2020.125944 ↗
83. Lazurenko, D., Golkovsky, M., Stark, A., Pyczak, F., Bataev, I., Ruktuev, A., Petrov, I., and Laptev, I. (2021). Structure and Properties of Ti-Al-Ta and Ti-Al-Cr Cladding Layers Fabricated on Titanium. Metals, 11.10.3390/met11071139 ↗
84. Effect of Ti content on microstructure and properties of TixZrVNb refractory high-entropy alloys10.1007/s12613-020-2040-1 ↗
85. Microstructural characteristics and properties of CoCrFeNiNbx high-entropy alloy coatings on pure titanium substrate by pulsed laser cladding10.1016/j.apsusc.2020.146214 ↗
86. Laser-cladded Al-Cr-Ti ternary alloy coatings on Ti-4Al-2V alloy: Specific microstructure and enhanced surface performance10.1016/j.surfcoat.2022.129073 ↗
87. Microstructure evolution and elevated temperature wear performance of in-situ laser-synthesized Ti-25Al-17Nb coating on Ti-6Al-4V10.1016/j.triboint.2022.107807 ↗
88. New Insights into Microstructure Characteristics and Tribological Property of Ti Alloy Processed by Hot-Dip Aluminizing and Heat Treatment10.1007/s11661-021-06575-0 ↗
89. Yang, W.Y., and Li, F.G. (2023). Study on the Effect of Carburizing on the Microstructure and High-Temperature Oxidation Properties of Hot-Dip Aluminum Coating on Titanium Alloy. Coatings, 13.10.20944/preprints202306.1678.v1 ↗