Functionally Gradient Material Fabrication Based on Cr, Ti, Fe, Ni, Co, Cu Metal Layers via Spark Plasma Sintering
Source abstract
Abstract
The paper presents a method of obtaining functionally graded material (FGM) of heterogeneous (layered) type based on joined metals Cr-Ti-Fe-Co-Ni-Cu using spark plasma sintering (SPS) technology. The structure, elemental and phase composition of FGM obtained on the basis of joined metals with different values of the temperature coefficient of linear expansion (CTLE) were studied by SEM, EDS and XRD methods with regard to the phase states of the alloy system. Based on the Vickers microhardness data, the evaluation of the mechanical characteristics of FGM in the whole sample body and locally at the contact boundaries of the joined metals was carried out. The results of the study are new and represent a potential for FGM, as well as functionally graded coatings (FGC), which have special physical, chemical and mechanical properties and are highly demanded for the manufacture of structures and products for industrial applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Tribology and Wear Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nuclear Technology Laboratory, Department of Nuclear Technology, Institute of High Technologies and Advanced Materials, Far Eastern Federal University, 10 Ajax Bay, Russky Island, 690922 Vladivostok, Russia
Moscow Aviation Institute, National Research University, Volokolamskoe Shosse 4, 125993 Moscow, Russia
State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
Funding
the Ministry of Science and Higher Education of the Russian Federation · the National Natural Science Foundation of China
References (33)
Show source-provided references
1. Functionally Graded Materials (FGM) Fabrication and Its Potential Challenges & Applications10.1016/j.matpr.2021.09.077 ↗
2. Past and Present of Functionally Graded Coatings: Advancements and Future Challenges10.1016/j.apmt.2022.101373 ↗
3. Functionally Graded Materials: A Review of Fabrication and Properties10.1016/j.apmt.2016.10.001 ↗
4. Progression in Manufacturing of Functionally Graded Materials and Impact of Thermal Treatment—A Critical Review10.1016/j.jmapro.2021.06.062 ↗
5. Ruys, A.J., and Sutton, B.A. (2021). Metal-Ceramic Functionally Graded Materials (FGMs). Metal-Reinforced Ceramics, Elsevier.10.1016/B978-0-08-102869-8.00009-4 ↗
6. Fabrication and Properties of Functionally Gradient Materials10.2109/jcersj.99.1002 ↗
7. Miyamoto, Y., Niino, M., and Koizumi, M. (1997). FGM Research Programs in Japan—From Structural to Functional Uses. Functionally Graded Materials 1996, Elsevier.10.1016/B978-044482548-3/50002-0 ↗
8. Kato, T., Morimoto, K., Isogai, K., Kato, M., Fukushima, T., and Fukuda, R. (1997). Development of Efficient Thermionic Energy Converter. Functionally Graded Materials 1996, Elsevier.10.1016/B978-044482548-3/50108-6 ↗
9. Duvall, D.S., and Ruckle, D.L. (1982, January 18–22). Ceramic thermal barrier coatings for turbine engine components. Proceedings of the ASME 1982 International Gas Turbine Conference and Exhibit, London, UK.10.1115/82-GT-322 ↗
10. Heikinheimo, L., Sirén, M., and Gasik, M.M. (1997). Al2O3 to Ni-Superalloy Diffusion Bonded FG-Joints for High Temperature Applications**This Study Has Been Supported by the European Commission through the Project BE-7249 under the Contract BRE2-CT94-0928. Functionally Graded Materials 1996, Elsevier.10.1016/B978-044482548-3/50052-4 ↗
11. Rakesh, P., and Davim, J.P. (2021). Joining Processes for Dissimilar and Advanced Materials, Woodhead Publishing.
12. A Review Paper on Effect of the Welding Process of Ceramics and Metals10.1016/j.jmrt.2020.11.088 ↗
13. Brazing SiC Ceramic Using Novel B4C Reinforced Ag-Cu-Ti Composite Filler10.1016/j.ceramint.2016.01.021 ↗
14. Review Article: Recent Advances in Metal-Ceramic Brazing10.1590/S0366-69132003000400002 ↗
15. 30 Years of Functionally Graded Materials: An Overview of Manufacturing Methods, Applications and Future Challenges10.1016/j.compositesb.2020.108376 ↗
16. Manière, C., Torresani, E., and Olevsky, E. (2019). Simultaneous Spark Plasma Sintering of Multiple Complex Shapes. Mater., 12.10.3390/ma12040557 ↗
17. SPS-RS Technique for Solid-Phase “in Situ” Synthesis of Biocompatible ZrO2 Porous Ceramics10.1088/1757-899X/307/1/012031 ↗
18. Synthetic CaSiO3 Sol-Gel Powder and SPS Ceramic Derivatives: “In Vivo” Toxicity Assessment10.1016/j.pnsc.2019.07.004 ↗
19. SrAl2Si2O8 Ceramic Matrices for 90Sr Immobilization Obtained via Spark Plasma Sintering-Reactive Synthesis10.1016/j.net.2021.01.024 ↗
20. Spark Plasma Sintering-Reactive Synthesis of SrWO4 Ceramic Matrices for 90Sr Immobilization10.1016/j.vacuum.2020.109628 ↗
21. A Complex Approach to Assessing Porous Structure of Structured Ceramics Obtained by SPS Technique10.1016/j.matchar.2018.08.044 ↗
22. SPS Hard Metal Alloy WC-8Ni-8Fe Fabrication Based on Mechanochemical Synthetic Tungsten Carbide Powder10.1016/j.jallcom.2019.152547 ↗
23. Spark Plasma Sintering of Special-Purpose Functional Ceramics Based on UO2, ZrO2, Fe3O4/α-Fe2O310.1134/S1087659618060159 ↗
24. Impact of a Supersonic Dissociated Air Flow on the Surface of HfB2–30 Vol % SiC UHTC Produced by the Sol–Gel Method10.1134/S0036023618110177 ↗
25. Spark Plasma Sintering of Graded Dissimilar Metals10.1007/s12666-019-01662-8 ↗
26. A Review of Multi-Physical Fields Induced Phenomena and Effects in Spark Plasma Sintering: Fundamentals and Applications10.1016/j.matdes.2020.108662 ↗
27. (2002). Thermal Expansion. Mechanical Engineering Principles, Routledge.
28. Dunn, B.D. (2016). Materials and Processes, Springer International Publishing.
29. Cu–Ni Nano-Alloy: Mixed, Core–Shell or Janus Nano-Particle?10.1039/C4NR05739B ↗
30. The Co-Ni (Cobalt-Nickel) System Co-Ni10.1007/BF02868090 ↗
31. Co-Fe (Cobalt-Iron)
32. Enthalpy of Formation of Intermetallic Phases from Fe-Ni-Ti System. Comparative Studies10.2478/v10172-012-0122-4 ↗
33. Thermodynamic and Kinetic Modeling of the Cr-Ti-V System10.1361/105497102770331569 ↗