Self-Cleaning Coatings for the Protection of Cementitious Materials: The Effect of Carbon Dot Content on the Enhancement of Catalytic Activity of TiO2
Source abstract
Abstract
The urgent demand for pollution protection of monuments and buildings forced the interest towards specific preservation methods, such as the application of photocatalytic coatings with self-cleaning and protective activity. TiO2 photocatalysts without and with a variety of carbon dots loading (TC0, TC25–75) were synthesized via a green, simple, low cost and large-scale hydrothermal method using citric acid, hydroxylamine and titanium isopropoxide (TTIP) and resulted in uniform anatase phase structures. In photocatalysis experiments, TC25 and TC50 composites with 1:3 and 1:1 mass ratio of C-dots solution to TTIP, respectively, showed the best degradation efficiency for methyl orange (MO) under UV-A light, simulated solar light and sunlight compared to TiO2, commercial Au/TiO2 (TAu) and catalysts with higher C-dot loading (TC62.5 and TC75). Treatment of cement mortars with a mixture of photocatalyst and a consolidant (FX-C) provided self-cleaning activity under UV-A and visible light. This study produced a variety of new, durable, heavy metal-free C-dots/TiO2 photocatalysts that operate well under outdoor weather conditions, evidencing the C-dot dosage-dependent performance. For the building protection against pollution, nanostructured photocatalytic films were proposed with consolidation and self-cleaning ability under solar irradiation, deriving from combined protective silica-based agents and TiO2 photocatalysts free or with low C-dot content.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Carbon and Quantum Dots Applications · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Materials of Cultural Heritage and Modern Building, School of Architecture, Technical University of Crete, 73100 Chania, Greece
References (66)
Show source-provided references
1. GBD 2016 Risk Factors Collaborators (2017). Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks, 1990–2016: A systematic analysis for the Global Burden of Disease Study 2016. Lancet, 390, 1345–1422.
2. Masson-Delmotte, V., Zhai, P., Pirani, A., Connors, S.L., Péan, C., Berger, S., Caud, N., Chen, Y., Goldfarb, L., and Gomis, M.I. (2021). IPCC, 2021: Climate Change 2021: The Physical Science Basis. Contribution of Working Group I to the Sixth Assessment Report of the Intergovernmental Panel on Climate Change, Cambridge University Press. Available online: https://www.ipcc.ch/report/ar6/wg1/#FullReport.
3. Air quality co-benefits for human health and agriculture counterbalance costs to meet Paris Agreement pledges10.1038/s41467-018-06885-9 ↗
4. Producing photoactive, transparent and hydrophobic SiO2-crystalline TiO2 nanocomposites at ambient conditions with application as self-cleaning coatings10.1016/j.apcatb.2014.03.042 ↗
5. A review on self-cleaning coatings10.1039/c1jm12523k ↗
6. Sakar, M., Prakash, R.M., and Do, T.-O. (2019). Insights into the TiO2-Based Photocatalytic Systems and Their Mechanisms. Catalysts, 9.10.3390/catal9080680 ↗
7. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
8. Understanding TiO2 Photocatalysis: Mechanisms and Materials10.1021/cr5001892 ↗
9. Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results10.1021/cr00035a013 ↗
10. An efficient and stable narrow bandgap carbon dot-brookite composite over other CD-TiO2 polymorphs in rhodamine B degradation under LED light10.1016/j.ceramint.2019.04.121 ↗
11. New understanding of the difference of photocatalytic activity among anatase, rutile and brookite TiO210.1039/C4CP02201G ↗
12. Electrophoretic Analysis and Purification of Fluorescent Single-Walled Carbon Nanotube Fragments10.1021/ja040082h ↗
13. Carbon Dots: A New Type of Carbon-Based Nanomaterial with Wide Applications10.1021/acscentsci.0c01306 ↗
14. Carbon quantum dots and their applications10.1039/C4CS00269E ↗
15. Water-Soluble Fluorescent Carbon Quantum Dots and Photocatalyst Design10.1002/anie.200906154 ↗
16. Photocatalytic degradation of organic contaminants under solar light using carbon dot/titanium dioxide nanohybrid, obtained through a facile approach10.1016/j.apsusc.2016.03.165 ↗
17. Synthesis of carbon quantum dots/TiO2 nanocomposite for photo-degradation of Rhodamine B and cefradine10.1016/j.diamond.2016.10.023 ↗
18. Mesoporous TiO2 modified with carbon quantum dots as a high-performance visible light photocatalyst10.1016/j.apcatb.2016.01.070 ↗
19. Synthesis of TiO2/Carbon Nanoparticle (C-dot) Composites as Active Catalysts for Photodegradation of Persistent Organic Pollutant10.22146/ijc.23615 ↗
20. Silica–carbon quantum dots decorated titanium dioxide as sunlight-driven photocatalyst to diminish acetaminophen from aquatic environment10.1016/j.jphotochem.2020.112436 ↗
21. One-step synthesis of nanohybrid carbon dots and TiO2 composites with enhanced ultraviolet light active photocatalysis10.1039/C4RA14865G ↗
22. TiO2-carbon quantum dots (CQD) nanohybrid: Enhanced photocatalytic activity10.1088/2053-1591/aacbb9 ↗
23. Visible−Ultraviolet Upconversion Carbon Quantum Dots for Enhancement of the Photocatalytic Activity of Titanium Dioxide10.1021/acsomega.0c05182 ↗
24. Nitrogen-Doped Carbon Dots/TiO2 Nanoparticle Composites for Photoelectrochemical Water Oxidation10.1021/acsanm.9b02412 ↗
25. Large-scale synthesis of carbon dots/TiO2 nanocomposites for the photocatalytic color switching system10.1039/C9NA00054B ↗
26. Stefanakis, D., Krasoudaki, T., Kaditis, A.-I., Bakolas, A., and Maravelaki, P.-N. (2021). Design of Novel Photocatalytic Films for the Protection of Architectural Surfaces via the Incorporation of Green Photocatalysts. Coatings, 11.10.3390/coatings11080934 ↗
27. Interaction of TEOS with cementitious materials: Chemical and physical effects10.1016/j.cemconcomp.2014.09.010 ↗
28. Photocatalytic degradation of methyl orange as a model compound10.1016/S1010-6030(02)00086-2 ↗
29. TEOS Modified With Nano-Calcium Oxalate and PDMS to Protect Concrete Based Cultural Heritage Buildings10.3389/fmats.2020.00016 ↗
30. TEOS-PDMS-Calcium Oxalate Hydrophobic Nanocomposite for Protection and Stone Consolidation10.3390/heritage4040224 ↗
31. David, M.E., Ion, R.-M., Grigorescu, R.M., Iancu, L., and Andrei, E.R. (2020). Nanomaterials used in conservation and restoration of cultural heritage: An up-to-date overview. Materials, 13.10.3390/ma13092064 ↗
32. The influence of surfactants on the crystalline structure, electrical and photocatalytic properties of hybrid multi-structured (SnO2, TiO2 and WO3) thin films10.1016/j.apsusc.2011.12.110 ↗
33. The floating photocatalytic spheres loaded with weak light-driven TiO2-based catalysts for photodegrading tetracycline in seawater10.1016/j.mssp.2022.106610 ↗
34. Sol-gel synthesized barium doped TiO2 nanoparticles for solar photocatalytic application10.1016/j.inoche.2022.109340 ↗
35. Rosales, A., and Esquivel, Κ. (2020). SiO2@TiO2 Composite Synthesis and Its Hydrophobic Applications: A Review. Catalysts, 10.10.3390/catal10020171 ↗
36. Rosales, A., Maury-Ramírez, A., Mejía-De Gutiérrez, R., Guzmán, C., and Esquivel, K. (2018). SiO2@TiO2 Coating: Synthesis, Physical Characterization and Photocatalytic Evaluation. Coatings, 8.10.3390/coatings8040120 ↗
37. Compatibility of photocatalytic TiO2-based finishing for renders in architectural restoration: A preliminary study10.1016/j.buildenv.2014.05.027 ↗
38. Self-cleaning of SiO2-TiO2 coating: Effect of sonochemical synthetic parameters on the morphological, mechanical, and photocatalytic properties of the films10.1016/j.ultsonch.2021.105483 ↗
39. Physico-chemical and mechanical characterization of hydraulic mortars containing nano-titania for restoration applications10.1016/j.cemconcomp.2012.07.002 ↗
40. Assessing the value of green conservation for cultural heritage: Positive and critical aspects of already available methodologies
41. Petronella, F., Pagliarulo, A., Truppi, A., Lettieri, M., Masieri, M., Calia, A., Curri, M.L., and Comparelli, R. (2018). TiO2 Nanocrystal Based Coatings for the Protection of Architectural Stone: The Effect of Solvents in the Spray-Coating Application for a Self-Cleaning Surfaces. Coatings, 8.10.3390/coatings8100356 ↗
42. TiO2–SiO2–PDMS nano-composite hydrophobic coating with self-cleaning properties for marble protection10.1016/j.porgcoat.2012.10.006 ↗
43. Kapridaki, C., Verganelaki, A., Dimitriadou, P., and Maravelaki-Kalaitzaki, P. (2018). Conservation of Monuments by a Three-Layered Compatible Treatment of TEOS-Nano-Calcium Oxalate Consolidant and TEOS-PDMS-TiO2 Hydrophobic/Photoactive Hybrid Nanomaterials. Materials, 11.10.3390/ma11050684 ↗
44. Synthesis of fluorescent carbon dots by a microwave heating process: Structural characterization and cell imaging applications10.1007/s11051-014-2646-1 ↗
45. Evaluation of strategies to prevent algal fouling on white architectural and cellular concrete10.1016/j.ibiod.2009.04.007 ↗
46. The effect of crystalline phase (anatase, brookite and rutile) and size on the photocatalytic activity of calcined polymorphic titanium dioxide (TiO2)10.1016/j.polymdegradstab.2018.02.008 ↗
47. The Scherrer Formula for X-ray Particle Size Determination10.1103/PhysRev.56.978 ↗
48. Effect of calcination temperature on the crystallite size, particle size and zeta potential of TiO2 nanoparticles synthesized via polyol-mediated method10.1016/j.matpr.2020.10.199 ↗
49. Microwave-assisted synthesis of (S)Fe/TiO2 systems: Effects of synthesis conditions and dopant concentration on photoactivity10.1016/j.apcatb.2013.03.047 ↗
50. TiO2 photoactivity in vis and UV light: The influence of calcination temperature and surface properties10.1016/j.apcatb.2008.04.028 ↗
51. Thermodynamic analysis of phase stability of nanocrystalline titania10.1039/a802619j ↗
52. Strain and grain size of TiO2 nanoparticles from TEM, Raman spectroscopy and XRD: The revisiting of the Williamson-Hall plot method10.1016/j.rinp.2018.03.008 ↗
53. Durability of nano-engineered TiO2 self-cleaning treatments on limestone10.1016/j.conbuildmat.2014.04.112 ↗
54. Self-Cleaning Activity on Concrete Surfaces Coated with Fe- and S-Doped TiO2 Synthesized by Sol–Gel Microwave Method10.1166/jnn.2017.13834 ↗
55. Photocatalytic Degradation of Pharmaceuticals Pollutants Using N-Doped TiO2 Photocatalyst: Identification of CFX Degradation Intermediates10.1080/00194506.2016.1150794 ↗
56. Room-temperature synthesis of single-crystalline anatase TiO2 nanowires10.1021/cg901210c ↗
57. Economical, green synthesis of fluorescent carbon nanoparticles and their use as probes for sensitive and selective detection of mercury(II) ions10.1021/ac3007939 ↗
58. Carbon quantum dots: A bright future as photosensitizers for in vitro antibacterial photodynamic inactivation10.1016/j.jphotobiol.2020.111864 ↗
59. Tauc, J. (1974). Optical properties of amorphous semiconductors. Amorphous and Liquid Semiconductors, Springer.10.1007/978-1-4615-8705-7 ↗
60. New contributions to the optics of intensely light-scattering materials. Part I10.1364/JOSA.38.000448 ↗
61. Sonocatalytic degradation of methyl orange in the presence of TiO2 catalysts and catalytic activity comparison of rutile and anatase10.1016/j.ultsonch.2004.05.002 ↗
62. Degradation kinetics of pollutants present in a simulated wastewater matrix using UV/TiO2 photocatalysis and its microbiological toxicity assessment10.1007/s11164-017-2992-6 ↗
63. (2022, February 18). NASA’s Power Data Access Viewer, Available online: https://power.larc.nasa.gov/data-access-viewer/.
64. Upconversion carbon quantum dots as visible light responsive component for efficient enhancement of photocatalytic performance10.1016/j.jcis.2017.01.121 ↗
65. Gherardi, F., and Maravelaki, P.N. (2022). Current and future trends in protective treatments for stone heritage. Conserving Stone Heritage, Springer.10.1007/978-3-030-82942-1 ↗
66. The influence of water-repellent admixtures on the behaviour and the effectiveness of Portland limestone cement mortars10.1016/j.cemconcomp.2015.02.004 ↗