Fabrication of a 3.5-GHz Solidly Mounted Resonator by Using an AlScN Piezoelectric Thin Film
Source abstract
Abstract
In this study, a 3.5-GHz solidly mounted resonator (SMR) was developed by doping scandium in aluminum nitride to form AlScN as the piezoelectric thin film. Molybdenum (Mo) of 449 nm thickness and silicon dioxide (SiO2) of 371 nm thickness were used as the high and low acoustic impedance films, respectively, which were alternately stacked on a silicon substrate to form a Bragg reflector. Then, an alloy target with atomic ratio of 15% Sc was adopted to deposit the piezoelectric AlScN thin film on the Bragg reflector, using a radio frequency magnetron sputtering system. The characteristics of the c-axis orientation of the AlScN thin films were optimized by adjusting sputtering parameters as sputtering power of 250 W, sputtering pressure of 20 mTorr, nitrogen gas ratio of 20%, and substrate temperature of 300 °C. Finally, a metal top electrode was coated to form a resonator. The X-ray diffraction (XRD) analysis showed that the diffraction peak angles of the AlScN film shifted towards lower angles in each crystal phase, compared to those of AlN film. The energy dispersive X-ray spectrometer (EDX) analysis showed that the percentage of scandium atom in the film is about 4.5%, regardless of the sputtering conditions. The fabricated resonator exhibited a resonance frequency of 3.46 GHz, which was a small deviation from the preset resonance frequency of 3.5 GHz. The insertion loss of −10.92 dB and the electromechanical coupling coefficient of 2.24% were obtained. As compared to the AlN-based device, the AlScN-based resonator exhibited an improved electromechanical coupling coefficient by about two times.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · GaN-based semiconductor devices and materials · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electrical Engineering, National Sun Yat-sen University, Kaohsiung 80424, Taiwan
Department of Computer and Communication, SHU-TE University, Kaohsiung 82445, Taiwan
References (33)
Show source-provided references
1. Analysis of frequency response of IDT/ZnO/Si SAW filter using the coupling of modes model10.1109/TUFFC.2007.495 ↗
2. McCarron, K., Kline, G., Martin, J., and Lakin, K. (1988, January 2–5). Growth and Characterization of Aluminium Nitride Thin Films for Piezoelectric Devices. Proceedings of the IEEE Ultrasonics Symposium Proceedings, Chicago, IL, USA.
3. Awang, Z., Miles, R., Milne, S., and Tu, Y. (1996, January 26–28). Sol-Gel Derived Bulk Acoustic Wave Devices For Cellular Communication Applications. Proceedings of the IEEE International Conference on Semiconductor Electronics, Penang, Malaysia.
4. Mattila, T., Oja, A., Jaakkola, O., Kiihamäki, J., Kattelus, H., Koskenvuori, M., Rantakari, P., Tittonen, I., and Seppä, H. (2002, January 8–11). Micromechanical Bulk Acoustic Wave Resonator. Proceedings of the IEEE Ultrasonics Symposium, Munich, Germany.
5. Lanz, R., Carazzetti, P., and Muralt, P. (2002, January 8–11). Surface Micromachined BAW Resonators Based on AlN. Proceedings of the IEEE Ultrasonics Symposium, Munich, Germany.
6. Hara, M., and Esashi, M. (2004, January 3–5). RF MEMS and MEMS Packaging. Proceedings of the International Symposium on Acoustic Wave Devices for Future Mobile Communication Systems, Chiba, Japan.
7. A noble suspended type thin film resonator (STFR) using the SOI technology10.1016/S0924-4247(00)00551-3 ↗
8. Thin film piezoelectric property considerations for surface acoustic wave and thin film bulk acoustic resonators10.1016/S0955-2219(03)00147-X ↗
9. Fabrication and performance analysis of film bulk acoustic wave resonators10.1016/j.matlet.2004.11.047 ↗
10. Integrated approach to electrode and AlN depositions for bulk acoustic wave (BAW) devices10.1016/S0167-9317(03)00386-1 ↗
11. Growth of highly c-axis textured AlN films on Mo electrodes for film bulk acoustic wave resonators10.1116/1.1521961 ↗
12. Lakin, K.M., Belsick, J.R., McDonald, J.P., McCarron, K.T., and Andrus, C.W. (2002, January 3–7). Bulk acoustic wave resonators and filters for 2GHz. Proceedings of the IEEE MTT-S, Seattle, WA, USA.10.1109/MWSYM.2002.1012137 ↗
13. Performance characterization of thin AlN films deposited on Mo electrode for thin-film bulk acoustic-wave resonators10.1143/JJAP.43.5510 ↗
14. Face-mounted piezoelectric resonators10.1109/PROC.1965.3925 ↗
15. Development of miniature filters for wireless applications10.1109/22.475658 ↗
16. Pinkett, S., Hunt, W., Barber, B., and Gammel, P. (2002, January 31). Broadband Characterization of Zinc Oxide-Based Solidly Mounted Resonators. Proceedings of the 2002 IEEE International Frequency Control Symposium and PDA Exhibition, New Orleans, LA, USA.
17. Measurements of the bulk, C-axis electromechanical coupling constant as a function of AlN film quality10.1109/58.818773 ↗
18. Lakin, K. (2005, January 4–8). Thin film resonator technology. Proceedings of the IEEE international frequency control sympposium, Tampa, FL, USA.
19. Lanz, R., Dubois, M.-A., and Muralt, P. (2001, January 7–10). Solidly Mounted BAW Filters for the 6 to 8 GHz Range Based on AlN Thin Films. Proceedings of the 2001 IEEE Ultrasonics Symposium, Atlanta, GA, USA.
20. Loebl, H., Metzmacher, C., Peligrad, D., Mauczok, R., Klee, M., Brand, W., Milsorn, R., Lok, P., Van Straten, F., and Tuinhout, A. (2002, January 8–11). Solidly mounted bulk acoustic wave filters for the GHz frequency range. Proceedings of the 2002 IEEE Ultrasonics Symposium, Munich, Germany.10.1557/PROC-783-B4.1 ↗
21. AlN-based film bulk acoustic resonator devices with W/SiO multilayers reflector for rf bandpass filter application
22. Dubois, M.-A., Muralt, P., Matsumoto, H., and Plessky, V. (1998, January 5–8). Solidly Mounted Resonator Based on Aluminum Nitride Thin Film. Proceedings of the 1998 IEEE Ultrasonics Symposium, Sendai, Japan.
23. Influence of electrode configurations on the quality factor and piezoelectric coupling constant of solidly mounted bulk acoustic wave resonators10.1063/1.1505977 ↗
24. Origin of the anomalous piezoelectric response in wurtzite ScxAl1−xN alloys10.1103/PhysRevLett.104.137601 ↗
25. Properties of hexagonal ScN versus wurtzite GaN and InN10.1103/PhysRevB.66.201203 ↗
26. Piezoelectricity of ordered (ScxGa1–xN) alloys from first principles10.1140/epjb/e2006-00438-8 ↗
27. Materials for high temperature acoustic and vibration sensors: A review10.1016/0003-682X(94)90091-4 ↗
28. Kim, S.-H., Kim, J.-H., Lee, J.-K., Lee, S.-H., Yoon, K.H., Sang-Hee, K., Jong-Heon, K., Jeon-Kook, L., Si-Hyung, L., and Hyun, Y.K. (2000, January 3-6). Bragg Reflector Thin Film Resonator Using Aluminium Nitride Deposited by RF Sputtering. Proceedings of the Asia-Pacific Microwave Conference, Sydney, NSW, Australia.
29. RF bulk acoustic wave resonators and filters10.1023/B:JECR.0000034005.21609.91 ↗
30. Larson, J., Bradley, P., Wartenberg, S., and Ruby, R. (2000, January 22–25). Modified butterworth-van dyke circuit for FBAR resonators and automated measurement system. Proceedings of the 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.00CH37121), San Juan, PR, USA.10.1109/ULTSYM.2000.922679 ↗
31. Lakin, K.M. (1999, January 17–20). Thin film resonators and filters. Proceedings of the 1999 IEEE Ultrasonics Symposium. Proceedings. International Symposium (Cat. No. 99CH37027), Tahoe, NV, USA.
32. Enhancement of piezoelectric response in scandium aluminum nitride alloy thin films prepared by dual reactive cosputtering10.1002/adma.200802611 ↗
33. High performance AlScN thin film-based surface acoustic wave devices with large electromechanical coupling coefficient10.1063/1.4896853 ↗