Proposals of Frequency-Based and Direction Methods to Reduce the Influence of Surface Topography Measurement Errors
Source abstract
Abstract
Various methods, based on both surface frequency and direction, can be alternatively proposed to reduce the influence of high-frequency measurement and data analysis errors. Various types of details were studied, e.g., cylinder liners after the plateau-honing process, plateau-honed cylinder liners with additionally burnished oil pockets (dimples), turned, ground, milled or laser-textured. They were measured with stylus or non-contact (optic) techniques. It was suggested to support various frequency-based methods, e.g., Frequency Spectrum, Power Spectral Densities or Autocorrelation Function, with direction techniques to provide reduction of errors in both detection and extraction of high-frequency measurement errors. Results can be especially valuable for regular studies when frequency-based measurement errors are difficult to be identified.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Roughness and Optical Measurements · Advanced Measurement and Metrology Techniques · Optical measurement and interference techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Powstancow Warszawy 8 Street, 35-959 Rzeszów, Poland
References (57)
Show source-provided references
1. On the influence of deformation of deep drawing quality steel sheet on surface topography and friction10.1016/j.triboint.2017.05.007 ↗
2. Leakage Monitoring in Static Sealing Interface Based on Three Dimensional Surface Topography Indicator10.1115/1.4040620 ↗
3. Superhydrophilic surface on Cu substrate to enhance lubricant retention10.1080/01694243.2012.697751 ↗
4. Analysis and prediction of surface wear resistance of ball-end milling topography10.1088/2051-672X/ab9d70 ↗
5. Investigation of wear resistance of selected materials after slide burnishing process10.17531/ein.2020.3.5 ↗
6. Cavitation erosion of electrostatic spray polyester coatings with different surface finish
7. Macek, W. (2021). Correlation between Fractal Dimension and Areal Surface Parameters for Fracture Analysis after Bending-Torsion Fatigue. Metals, 11.10.3390/met11111790 ↗
8. Influence of Surface Topography on the Tribological Behaviour of Aluminium Alloy 5182 with EDT Surface10.1007/s11249-010-9625-1 ↗
9. Open questions in surface topography measurement: A roadmap10.1088/2051-672X/3/1/013001 ↗
10. Podulka, P. (2022). Selection of Methods of Surface Texture Characterisation for Reduction of the Frequency-Based Errors in the Measurement and Data Analysis Processes. Sensors, 22.10.3390/s22030791 ↗
11. Pawlus, P., Wieczorowski, M., and Mathia, T. (2014). The Errors of Stylus Methods in Surface Topography Measurements, Zapol.
12. Digitisation of surface topography measurement results10.1016/j.measurement.2006.07.009 ↗
13. Bisquare robust polynomial fitting method for dimple distortion minimisation in surface quality analysis10.1002/sia.6793 ↗
14. The effect of valley depth on areal form removal in surface topography measurements
15. Magdziak, M. (2019). Selection of the Best Model of Distribution of Measurement Points in Contact Coordinate Measurements of Free-Form Surfaces of Products. Sensors, 19.10.3390/s19245346 ↗
16. Spikes removal in surface measurement10.1088/1742-6596/483/1/012025 ↗
17. Definition and evaluation of topography measurement noise in optical instruments
18. Noise in phase shifting interferometry10.1364/OE.17.008789 ↗
19. Comparison of three focus sensors for optical topography measurement of rough surfaces10.1364/OE.27.033459 ↗
20. Comparisons of envelope morphological filtering methods and various regular algorithms for surface texture analysis10.24425/mms.2020.132772 ↗
21. Podulka, P. (2021). Suppression of the High-Frequency Errors in Surface Topography Measurements Based on Comparison of Various Spline Filtering Methods. Materials, 14.10.3390/ma14175096 ↗
22. (2016). Geometrical Product Specification (GPS)—Surface Texture: Areal Part 600: Metrological Characteristics for Areal-Topography Measuring Methods (Standard No. ISO 2016 25178-600).
23. De Groot, P.J. (2017). The Meaning and Measure of Vertical Resolution in Optical Surface Topography Measurement. Appl. Sci., 7.10.3390/app7010054 ↗
24. Podulka, P. (2021). Reduction of Influence of the High-Frequency Noise on the Results of Surface Topography Measurements. Materials, 14.10.3390/ma14020333 ↗
25. An analysis of slope of surface topography
26. Development of a compact focus variation microscopy sensor for on-machine surface topography measurement10.1016/j.measurement.2021.110311 ↗
27. Design and analysis of strut-based lattice structures for vibration isolation10.1016/j.precisioneng.2017.09.010 ↗
28. Muhamedsalih, H., Jiang, X., and Gao, F. (2010). Vibration compensation of wavelength scanning interferometer for in-process surface inspection. Proceedings of the 10th Proceedings of Computing and Engineering Annual Researchers’ Conference 2010, University of Huddersfield.
29. Leach, R.K. (2020). In-process surface topography measurements. Advances in Optical Surface Texture Metrology, IOP Publishing.10.1088/978-0-7503-2528-8 ↗
30. A new approach to analysis of surface topography10.1016/j.precisioneng.2010.05.002 ↗
31. Using the power spectral density method to characterise the surface topography of optical surfaces10.1117/12.861539 ↗
32. Calculation of the power spectral density from surface profile data10.1364/AO.34.000201 ↗
33. Fast Fourier Transform detection and reduction of high-frequency errors from the results of surface topography profile measurements of honed textures10.17531/ein.2021.1.9 ↗
34. Estimating Nanoscale Surface Roughness of Polyethylene Terephthalate Fibers10.1021/acsomega.9b04211 ↗
35. A novel approach to characterizing the surface topography of niobium superconducting radio frequency (SRF) accelerator cavities10.1016/j.apsusc.2010.11.159 ↗
36. Quantitative characterisation of surface topography using spectral analysis10.1088/2051-672X/aa51f8 ↗
37. Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components10.1364/AO.41.000154 ↗
38. Similarity quantification of 3D surface topography measurements10.1016/j.measurement.2021.110207 ↗
39. Power spectral density analysis of optical substrates for gravitational-wave interferometry10.1364/AO.38.004790 ↗
40. Research into the application of fractal geometry in characterising machined surfaces10.1016/S0890-6955(01)00085-2 ↗
41. Surface characterisation by parameter-based technique, slicing method and PSD analysis10.1016/j.measurement.2011.02.021 ↗
42. Surface morphology analysis of Duplex Stainless Steel (DSS) in Clean Production using the Power Spectral Density10.1016/j.measurement.2016.08.023 ↗
43. Fractal analyses of ITO thin films: A study based on power spectral density10.1016/j.physb.2009.09.005 ↗
44. Enhanced characterization of niobium surface topography10.1103/PhysRevSTAB.14.123501 ↗
45. An improved signal determination method on machined surface topography10.1016/j.precisioneng.2017.09.004 ↗
46. Influence of noise on the fractal dimension of measured surface topography10.1016/j.measurement.2019.107311 ↗
47. Determination of proper frequency bandwidth for 3D topography measurement using spectral analysis. Part I: Isotropic surfaces10.1016/0043-1648(93)90265-N ↗
48. Proposal of frequency-based decomposition approach for minimization of errors in surface texture parameter calculation10.1002/sia.6840 ↗
49. A review of digital filtering in evaluation of surface roughness
50. Selection of reference plane by the least squares fitting methods10.12913/22998624/62633 ↗
51. Podulka, P. (2021). The Effect of Surface Topography Feature Size Density and Distribution on the Results of a Data Processing and Parameters Calculation with a Comparison of Regular Methods. Materials, 14.10.3390/ma14154077 ↗
52. Problem on non-measured points in surface texture measurements10.1515/mms-2017-0046 ↗
53. Pawlus, P., Reizer, R., and Wieczorowski, M. (2021). Functional Importance of Surface Texture Parameters. Materials, 14.10.3390/ma14185326 ↗
54. (2012). Geometrical Product Specifications (GPS)—Surface Texture: Areal—Part 3: Specification Operators (Standard No. ISO 25178-3:2012).
55. Edge-area form removal of two-process surfaces with valley excluding method approach10.1051/matecconf/201925205020 ↗
56. Podulka, P. (2021). Improved Procedures for Feature-Based Suppression of Surface Texture High-Frequency Measurement Errors in the Wear Analysis of Cylinder Liner Topographies. Metals, 11.10.3390/met11010143 ↗
57. (2011). Geometrical Product Specifications (GPS)—Filtration—Part 21: Linear Profile Filters: Gaussian Filters (Standard No. ISO 16610-21:2011).