Roles of Graphene Additives in Optimizing the Microstructure and Properties of Ni–Cr–Graphene Coatings

The electrodeposition technique was used to fabricate graphene and Cr particle-reinforced Ni–Cr–graphene coatings. The Rietveld refinement was utilized to analyze the microstructure of Ni deposits in the coatings. The properties including micro-hardness and corrosion behaviors of the coatings were also tested. Results showed that the addition of graphene particles contributed to the dendrite like structure on the surface of the Ni–Cr–graphene coating. The crystallite size and [200] texture of the Ni deposits in the Ni–Cr–graphene coatings were significantly decreased by the graphene particles. The crystallite size of 149.8 nm in the Ni-25–Cr-0–graphene coating was reduced to 35 nm in the Ni-25–Cr-8–graphene coating due to the addition of 8 g/L graphene to the electrolyte. The microstructure evolution of the Ni–Cr–graphene coatings brought about an enhancement in micro-hardness and corrosion resistance of the coatings. The micro-hardness of the coatings was improved from 260.1 HV0.2 of the pure Ni coating to 285.9 HV0.2 of the Ni-25–Cr-0–graphene coating and continually to 461.8 HV0.2 of the Ni-25–Cr-8–graphene coating. In corrosion solution (3.5 wt.% NaCl), the corrosion current (6.22 μA/cm2) of the Ni-25–Cr-0–graphene coating could be decreased by about an order of magnitude through the addition of graphene particles, which was 0.33 μA/cm2 for the Ni-25–Cr-8–graphene coating.