Investigation of Element Effect on High-Temperature Oxidation of HVOF NiCoCrAlX Coatings
Source abstract
Abstract
MCrAlX (M: Ni or Co or both, X: minor elements) coatings have been used widely to protect hot components in gas turbines against oxidation and heat corrosion at high temperatures. Understanding the influence of the X-elements on oxidation behavior is important in the design of durable MCrAlX coatings. In this study, NiCoCrAlX coatings doped with Y + Ru and Ce, respectively, were deposited on an Inconel-792 substrate using high velocity oxygen fuel (HVOF). The samples were subjected to isothermal oxidation tests in laboratory air at 900, 1000, and 1100 °C and a cyclic oxidation test between 100 and 1100 °C with a 1-h dwell time at 1100 °C. It was observed that the coating with Ce showed a much higher oxidation rate than the coating with Y + Ru under both isothermal and cyclic oxidation tests. In addition, the Y + Ru-doped coating showed significantly lower β phase depletion due to interdiffusion between the coating and the substrate, resulting from the addition of Ru. Simulation results using a moving phase boundary model and an established oxidation-diffusion model showed that Ru stabilized β grains, which reduced β-depletion of the coating due to substrate interdiffusion. This paper, combining experiment and simulation results, presents a comprehensive study of the influence of Ce and Ru on oxidation behavior, including an investigation of the microstructure evolution in the coating surface and the coating-substrate interface influenced by oxidation time.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Management and Engineering, Linköping University, 581 83 Linköping, Sweden
Siemens Industrial Turbomachinery AB, 612 83 Finspång, Sweden
References (42)
Show source-provided references
1. The oxidation behaviour of HVOF thermal-sprayed MCrAlY coatings10.1016/S0257-8972(97)00470-2 ↗
2. Effect of pre-oxidation on the hot corrosion of CoNiCrAlYRe alloy10.1016/j.corsci.2010.09.045 ↗
3. Some comments on the role of yttrium in protective oxide scale adherence10.1016/0025-5416(87)90387-9 ↗
4. Growth and adhesion of oxide scales on Al2O3-forming alloys and coatings10.1016/0025-5416(87)90388-0 ↗
5. Effect of quaternary additions on the oxidation behavior of Hf-doped NiAl10.1023/A:1023087926788 ↗
6. Improved cyclic oxidation resistance of electron beam physical vapor deposited nano-oxide dispersed β-NiAl coatings for Hf-containing superalloy10.1016/j.corsci.2010.01.009 ↗
7. Development of alloyed and dispersion-strengthened MCrAlY coatings10.1016/S0257-8972(96)02961-1 ↗
8. Improvement of MCrAlY coatings by addition of rhenium10.1016/0257-8972(94)90131-7 ↗
9. Cyclic oxidation of high-temperature alloys10.1080/02670836.1987.11782264 ↗
10. Effect of cerium and silicon additions to MCrAlY on the high-temperature oxidation behavior and bond strength of thermal barrier coatings10.4028/www.scientific.net/KEM.261-263.1061 ↗
11. Spalling of the surface oxide formed on Ni-(20,40,60,80)Cr alloys with small additions of Ce and Si10.1016/0925-8388(93)90297-Z ↗
12. Reaction diffusion behaviors for interface between Ni-based super alloys and vacuum plasma sprayed MCrAlY coatings10.1115/1.2818497 ↗
13. MCrAlY coating design based on oxidation-diffusion modelling. Part I: Microstructural evolution10.1016/j.surfcoat.2014.05.067 ↗
14. Compositional effects on the high-temperature oxidation lifetime of MCrAlY type coating alloys10.1016/j.corsci.2015.03.011 ↗
15. Diffusion barrier behaviors of (Ru,Ni)Al/NiAl coatings on Ni-based superalloy substrate10.1016/j.intermet.2010.08.016 ↗
16. The effects of ruthenium on the phase stability of fourth generation Ni-base single crystal superalloys10.1016/j.scriptamat.2006.01.003 ↗
17. Effect of reactive element oxide inclusions on the growth kinetics of protective oxide scales10.1016/j.actamat.2007.07.007 ↗
18. Mechanism of adhesion of alumina on MCrAlY alloys10.1007/BF00659344 ↗
19. Some aspects of elemental behaviour in HVOF MCrAlY coatings in high-temperature oxidation10.1016/j.surfcoat.2014.11.053 ↗
20. Modeling of microstructural evolution and lifetime prediction of MCrAlY coatings on nickel based superalloys during high temperature oxidation10.1016/j.surfcoat.2013.05.008 ↗
21. MCrAlY coating design based on oxidation–diffusion modelling. Part II: Lifing aspects10.1016/j.surfcoat.2014.05.010 ↗
22. Effects of heat treatments on the microstructure of IN792 alloy10.1016/j.msea.2009.10.026 ↗
23. The effect of heat treatment on the oxidation behavior of HVOF and VPS CoNiCrAlY coatings10.1007/s11666-009-9311-8 ↗
24. (2015). TCS Ni-Based Superalloys Database, Thermo-Calc Software. version 8.
25. (2015). TCS Ni-Alloys Mobility Database, Thermo-Calc Software. version 4.
26. Thermo-Calc & DICTRA computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
27. On the numerical simulation of diffusion-controlled reactions under local equilibrium conditions10.1016/j.actamat.2008.04.008 ↗
28. A model for 1D multiphase moving phase boundary simulations under local equilibrium conditions10.1016/j.calphad.2014.06.001 ↗
29. Parameters affecting TGO growth and adherence on MCrAlY-bond coats for TBC’s10.1016/j.surfcoat.2006.07.247 ↗
30. Oxidation behavior of graded NiCrAlYRe coatings at 900, 1000 and 1100 °C10.1007/s11085-008-9131-0 ↗
31. The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys10.1016/0010-938X(92)90002-K ↗
32. Effect of the theta-alpha-Al2O3 transformation on the oxidation behavior of beta-NiAl + Zr10.1007/BF00846690 ↗
33. Grobstein, T., and Doychak, J.K. (1989). The oxidation of Ni-rich Ni-Al intermetallics. Oxidation of High-Temperature Intermetallics, Proceedings of the Workshop on the Oxidation of High-Temperature Intermetallics, Cleveland, OH, USA, 22–23 September 1988, TMS.
34. On the Formation of Interfacial and Internal Voids in a-Al2O3 Scales10.1007/BF01670505 ↗
35. Cahn, R.W., Haasen, P., and Kramer, E.J. (2008). High-Temperature Oxidation and Corrosion of Metals. Materials Science and Technology: A Comprehensive Treatment Materials Science and Technology: A Comprehensive Treatment: Corrosion and Environmental Degradation, Volumes I+II, 1, Wiley-VCH Verlag GmbH & Co., KGaA.
36. Correlation between the microstructure, growth mechanism, and growth kinetics of alumina scales on a FeCrAlY alloy10.1007/s11661-007-9342-z ↗
37. Influence of surface area and additives on the thermal stability of transition alumina catalyst supports
38. Alumina scale growth at zirconia-MCrAlY interface: A microstructural study10.1007/BF02403637 ↗
39. Oxidation behavior of sputter-deposited NiCrAlY coating10.1016/S0257-8972(02)00738-7 ↗
40. Aluminum ion diffusion in aluminum oxide10.1063/1.1733252 ↗
41. Metallic yttrium additions to high temperature alloys: Influence on Al2O3 scale properties10.1007/BF00656898 ↗
42. Effects of Ce and Si additions to CoNiCrAlY bond coat materials on oxidation behavior and crack propagation of thermal barrier coatings10.1361/105996306X147081 ↗