Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel
Source abstract
Abstract
Metal matrix composites have become a research hotspot due to their unique properties. In this paper, Ni-W-Carbon fiber (CF) composite coating was prepared by electrodeposition method, and the effects of CF content on the microstructure, composition, and corrosion resistance of the coating were studied by means of Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectrometer (EDS) and electrochemical testing by changing the concentration of CF in the plating solution. The results show that when 0.4 g/L nano-CF is added, the CF content in the composite coating is the largest and the distribution is uniform; the surface roughness Ra of the composite coating reaches a minimum of 14 nm. The electrochemical results show that the composite coating electrodeposited in the electrolyte containing 0.4 g/L nano-CF has the highest corrosion resistance. The Guglielmi model can be used to describe the co-deposition behavior. This study provides useful enlightenment for the further application of Ni-W-CF coating in harsh corrosive environments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Chemistry and Chemical Engineering, Xi’an University of Architecture and Technology, Xi’an 710000, China
Funding
Qiuli Zhang
References (39)
Show source-provided references
1. Nickel interlayer enables indirect corrosion protection of magnesium alloy by photoelectrochemical cathodic protection10.1016/j.apsusc.2021.149840 ↗
2. Silicon nitride modified enamel coatings enable high thermal shock and corrosion resistances for steel protection10.1016/j.surfcoat.2021.127474 ↗
3. Evaluation of protection performances of Stylosanthes gracilis extract against 304L corrosion in H2SO4 solution10.1016/j.cscee.2020.100058 ↗
4. Fabrication and characterization of Mg-M layered double hydroxide films on anodized magnesium alloy AZ3110.1016/j.apsusc.2017.06.244 ↗
5. Self-healing ceria-modified coating for corrosion protection of AZ31 magnesium alloy10.1016/j.corsci.2018.06.013 ↗
6. Superhydrophobic coatings for corrosion protection of magnesium alloys10.1016/j.jmst.2020.02.055 ↗
7. In-situ grown super- or hydrophobic Mg-Al layered double hydroxides films on the anodized magnesium alloy to improve corrosion properties10.1016/j.surfcoat.2019.03.016 ↗
8. Active corrosion protection by a smart coating based on a MgAl-layered double hydroxide on a cerium-modified plasma electrolytic oxidation coating on Mg alloy AZ3110.1016/j.corsci.2018.05.010 ↗
9. Fabrication and corrosion property of conversion films on magnesium alloy from deep eutectic solvent10.1016/j.surfcoat.2018.04.004 ↗
10. Corrosion and tribological properties of nanocrystalline pulse electrodeposited Ni–W alloy coatings10.1080/00202967.2017.1262117 ↗
11. Preparation and wear resistance of electrodeposited Ni-W/diamond composite coatings10.1016/j.apsusc.2014.04.175 ↗
12. Microstructural, surface and electrochemical properties of a novel Ni-B/Ni-W-BN duplex composite coating by co-electrodeposition10.1016/j.apsusc.2018.07.100 ↗
13. Influence of metallurgical parameters on the electrochemical behavior of electrodeposited Ni and Ni-W nanocrystalline alloys10.1016/j.apsusc.2016.02.101 ↗
14. Phosphonic acid functionalization of nanostructured Ni-W coatings on steel10.1016/j.apsusc.2017.09.222 ↗
15. Electrodeposition and corrosion resistance of Ni-W-Al2O3 nanocomposite coatings10.1142/S0218625X18500154 ↗
16. Electrodeposition of Ni-W-Al2O3 nanocomposite coating with functionally graded microstructure10.1016/j.jallcom.2016.01.031 ↗
17. Preparation of Ni-W/SiC nanocomposite coatings by electrochemical deposition10.1016/j.jallcom.2017.01.239 ↗
18. Tribological Behavior of Pulsed Electrodeposited Ni-W/SiC Nanocomposites10.1007/s11665-018-3608-z ↗
19. Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel-tungsten composite coatings10.1016/j.apsusc.2015.12.179 ↗
20. Effect of current density and deposition time on microstructure and corrosion resistance of Ni-W/TiN nanocomposite coating10.1016/j.ceramint.2018.11.184 ↗
21. Effect of current density on properties of Ni-W nanocomposite coatings reinforced with zirconia particles10.1016/j.matchemphys.2016.02.050 ↗
22. Fabrication and characterization of boron nitride reinforced Ni-W nanocomposite coating by electrodeposition10.1016/j.jallcom.2018.11.081 ↗
23. The influence of pulse plating parameters on microstructure and properties of Ni-W-Si3N4 nanocomposite coatings10.1016/j.ceramint.2016.08.171 ↗
24. Microstructural, surface and electrochemical properties of pulse electrodeposited Ni-W/Si3N4 nanocomposite coating10.1016/j.ceramint.2018.07.254 ↗
25. Synthesis and characterization of Ni-W/TiN nanocomposite coating with enhanced wear and corrosion resistance deposited by pulse electrodeposition10.1016/j.ceramint.2019.04.101 ↗
26. Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding10.1016/j.carbon.2018.09.006 ↗
27. Study on wear characteristics of carbon fiber at needle end in prefabricated composite weaving10.1016/j.jmrt.2021.05.023 ↗
28. Carbon fiber surfaces and composite interphases10.1016/j.compscitech.2014.07.005 ↗
29. Bard, A.J., and Faulkner, L.R. (2002). Student Solutions Manual to Accompany Electrochemical Methods: Fundamentals and Applications, John Wiley & Sons. [2nd ed.].
30. Ultrasound-assisted electrodeposition of thin nickel-based composite coatings with lubricant particles10.1016/j.surfcoat.2015.06.030 ↗
31. Influence of Y2O3 nanoparticles on microstructures and properties of electrodeposited Ni-W-Y2O3 nanocrystalline coatings10.1016/j.vacuum.2020.109665 ↗
32. Fabrication of Ni-W-B4C composite coatings and evaluation of its micro–hardness and corrosion resistance properties10.1016/j.ceramint.2018.02.128 ↗
33. The effect of deformation on metastable pitting of 304 stainless steel in chloride contaminated concrete pore solution10.1016/j.corsci.2015.11.022 ↗
34. Investigation of pulse electrodeposited Ni-Co/SiO2 nanocomposite coating10.1080/02670844.2016.1275484 ↗
35. Pulsed electrodeposition and mechanical properties of Ni-W/SiC nano-composite coatings10.1016/j.matdes.2016.09.070 ↗
36. Electrochemical tailoring of ternary Ni-W-Co(Al2O3) nanocomposite using pulse reverse technique10.1016/j.jallcom.2017.02.155 ↗
37. A Comparative Study on the Effect of MWCNT as Reinforcement on the Corrosion Parameters of Different Ni-W/MWCNTs Nanocomposite Coatings in Various Corrosive Media10.1007/s12540-018-0060-4 ↗
38. Kinetics of the Deposition of Inert Particles from Electrolytic Baths10.1149/1.2404383 ↗
39. The electrical double layer: Recent experimental and theoretical developments10.1021/cr00103a008 ↗