TiN/NbN Nanoscale Multilayer Coatings Deposited by High Power Impulse Magnetron Sputtering to Protect Medical-Grade CoCrMo Alloys
Source abstract
Abstract
This study describes the performance of nanoscale multilayer TiN/NbN coatings deposited on CoCrMo medical-grade alloys by utilising novel mixed high power impulse magnetron sputtering (HIPIMS) and direct current unbalanced magnetron sputtering (UBM) technique in an industrial size vacuum coater. Scanning electron microscopy analysis showed that these coatings were extremely dense without any intercolumnar voids. The coating exhibited high hardness of 28 GPa, as well as low friction and wear coefficient of 0.7 and 1.4 × 10−14 m3·N−1·m−1, respectively, as compared to the bare material. Scratch tests revealed superior coating to substrate adhesion due to the HIPIMS etching prior to coating deposition. Energy-dispersive X-ray analysis of the wear debris generated during the impact test together with focused ion beam cross-section analysis in different locations of the impact crater revealed the coating failure mechanism and further confirmed the excellent coating to substrate bonding strength. Potentiodynamic polarisation tests in NaCl and Hank’s solutions revealed the clear passivation behaviour, several orders of magnitude lower corrosion currents, and high pitting potentials of the coating, which guarantee excellent protection to the base alloy in such aggressive environments. Inductively coupled plasma mass spectrometry analysis of Hank’s solution containing corrosion debris of the coated sample revealed that the leaching of harmful metal ions from the base material was reduced to below the detection limit of the technique, thus demonstrating the high barrier properties of the coating.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National HIPIMS Technology Centre, Materials and Engineering Research Institute, Sheffield Hallam University, Howard Street, Harmer Building, Sheffield S1 1WB, UK
Zimmer-Biomet UK Limited, Dorcan Industrial Estate, Swindon SN3 5HY, UK
Funding
Zimmer-Biomet, UK
References (23)
Show source-provided references
1. Okazaki, Y., and Gotoh, E. (2005). Comparison of metal release from various metallic biomaterials in vitro. Biomaterials.10.1016/j.biomaterials.2004.02.005 ↗
2. Implications of metallic corrosion in total knee arthroplasty10.1097/00003086-199110000-00004 ↗
3. Evaluation of the carcinogenic risks to humans associated with surgical implants and other foreign bodies—A report of an IARC Monographs Programme Meeting10.1016/S0959-8049(99)00312-3 ↗
4. Wisbey, A., Gregson, P.J., and Tuke, M. (1987). Application of PVD TiN coating to Co–Cr–Mo based surgical implants. Biomaterials, 8.10.1016/0142-9612(87)90085-8 ↗
5. Pham, V.H., Yook, S.W., Lee, E.J., Li, Y., Jeon, G., Lee, J.J., Kim, H.E., and Koh, Y.H. (2011). Deposition of TiN films on Co–Cr for improving mechanical properties and biocompatibility using reactive DC sputtering. J. Mater. Sci. Mater. Med.10.1007/s10856-011-4410-8 ↗
6. Harman, M.K., Banks, S.A., and Andrew Hodge, W. (1997). Wear analysis of a retrieved hip implant with titanium nitride coating. J. Arthroplast.10.1016/S0883-5403(97)90164-9 ↗
7. Neumann, H.G., Beck, U., Drawe, M., and Steinbach, J. (1998). Multilayer systems for corrosion protection of stainless steel implants. Surf. Coat. Technol.10.1016/S0257-8972(97)00236-3 ↗
8. Hamelynck, K.J., and Woering, R.G. (2021, April 14). Ceramic Surface Engineered Metal-on-Metal Hips System for Total Hip Arthroplasty and Resurfacing Hip Arthroplasty. ACCIS White Pap. Available online: https://silo.tips/download/ceramic-surface-engineered-metal-on-metal-hips-system-for-total-hip-arthroplasty.
9. Development of superlattice CrN/NbN coatings for joint replacements deposited by high power impulse magnetron sputtering10.1007/s10856-016-5751-0 ↗
10. Wei, R. (2007). Fundamentals and Applications of HIPIMS. Plasma Surface Engineering Research and Its Practical Applications, Research Signpost.
11. Influence of high power impulse magnetron sputtering plasma ionization on the microstructure of TiN thin films10.1063/1.3579443 ↗
12. Ehiasarian, A.P., Wen, J.G., and Petrov, I. (2007). Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion. J. Appl. Phys.10.1063/1.2697052 ↗
13. Ehiasarian, A., Hovsepian, P., and Munz, W. (2006). Combined Coating Process Comprising Magnetic Field-Assisted, High Power, Pulsed Cathode Sputtering and an Unbalanced Magnetron. (7,081,186), U.S. Patent.
14. CrN/NbN superlattice structured coatings with enhanced corrosion resistance achieved by high power impulse magnetron sputtering interface pre-treatment10.1016/j.tsf.2006.11.014 ↗
15. Hovsepian, P.E., Sugumaran, A.A., Purandare, Y., Loch, D.A.L., and Ehiasarian, A.P. (2014). Effect of the degree of high power impulse magnetron sputtering utilisation on the structure and properties of TiN films. Thin Solid Film., 562.10.1016/j.tsf.2014.04.002 ↗
16. Hovsepian, P.E., and Ehiasarian, A.P. (2019). Six strategies to produce application tailored nanoscale multilayer structured PVD coatings by conventional and high power impulse magnetron sputtering (HIPIMS). Thin Solid Film., 688.10.1016/j.tsf.2019.137409 ↗
17. Cavaleiro, A., and De Hosson, J.T.M. (2006). Synthesis, Structure, and Applications of Nanoscale Multilayer/Superlattice Structured PVD Coatings. Nanostructured Coatings, Springer.10.1007/978-0-387-48756-4 ↗
18. Ehiasarian, A.P., Tietema, R., Bugyi, R., Klimczak, A., Hovsepian, P.E., and Doerwald, D. (2010). A Vacuum Treatment Apparatus, a Bias Power Supply and a Method of Operating a Vacuum Treatment Apparatus. (20,100,025,230 A1), U.S. Patent.
19. Zhang, S., Sun, D., Fu, Y., and Du, H. (2005). Toughness measurement of thin films: A critical review. Surf. Coat. Technol., 198.10.1016/j.surfcoat.2004.10.021 ↗
20. Ehiasarian, A.P., New, R., Münz, W.D., Hultman, L., Helmersson, U., and Kouznetsov, V. (2002). Influence of high power densities on the composition of pulsed magnetron plasmas. Vacuum.10.1016/S0042-207X(01)00475-4 ↗
21. Metal ion release from TiN coated CoCrMo orthopedic implant material10.1016/j.surfcoat.2005.05.005 ↗
22. Realising the potential of duplex surface engineering10.1016/S0301-679X(98)00015-2 ↗
23. Fu, K., Chang, L., Zheng, B., Tang, Y., and Yin, Y. (2015). Analysis on cracking in hard thin films on a soft substrate under Berkovich indentation. Vacuum, 112.10.1016/j.vacuum.2014.11.013 ↗