Study on the Influencing Factors in the Process of Surface Strippable Decontaminant
Source abstract
Abstract
One effective measure of radioactive material purification is the use of strippable decontaminants, which effectively coat the pollutant, capture suspended particles in the air, and deposit them onto the surfaces of objects. However, there are some shortcomings in terms of film formation and peelability, such as a brittle coating and poor peelability. Therefore, in order to meet future military and emergency needs, this research investigated the influencing factors in the process of surface strippable decontamination. Experiments included tests for wettability, potential, particle size, strippable performance, tensile performance, ultraviolet transmittance reflectance, and film formation as well as image analysis of photomicrographs from an optical microscope system. These experiments indicate that the strippable decontaminant is a viable means of contamination removal.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Radioactive element chemistry and processing · Nuclear and radioactivity studies · Graphite, nuclear technology, radiation studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Environment-Friendly Energy Materials, School of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, China
Communist Youth League of Southwest University of Science and Technology, Mianyang 621010, China
Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621010, China
Institute of Materials, China Academy of Engineering Physics, Jiangyou 621908, China
Funding
liyintao
References (32)
Show source-provided references
1. Wu, Q. (1999, January 17–21). Current status and recommendations of mechanical decontamination technology. Proceedings of the National Symposium on Radiation Protection for Young and Middle Aged, Hangzhou, China.
2. Application of laser to decontamination and decommissioning of nuclear facilities at JAERI
3. Ultrasonic decontamination of prototype fast breeder reactor fuel pins10.1016/j.ultras.2013.12.008 ↗
4. Development of chemical decontamination technology and its application in decommissioning of nuclear facilities
5. Low corrosive chemical decontamination method using pH control, (II) decomposition of reducing agent by using catalyst with hydrogen peroxide10.1080/18811248.2002.9715280 ↗
6. Bargues, S., Favier, F., Pascal, J.L., Lecourt, J.P., and Damerval, F. (2001). Organomineral Decontamination Gel and Use Thereof for Surface Decontamination. (6,203,624), U.S. Patent.
7. Zhou, Y.L., Li, Y.T., Xie, C.Q., and Li, Y.J. (2014). Preparation of a Self-Brittle Radioactive Decontamination Coating. (102,690,579B), CN Patent.
8. International Atomic Energy Agency (2001). Report of the International Mission on Remediation of Large Contaminated Areas Off-Site the Fukushima Dai-Ichi NPP, International Atomic Energy Agency.
9. Mechanisms of desorption of 134Cs and 85Sr aerosols deposited on urban surfaces10.1016/S0265-931X(01)00136-9 ↗
10. Decontamination of radionuclides on construction materials10.1007/s10967-012-2146-7 ↗
11. Wide-area decontamination in an urban environment after radiological dispersion: A review and perspectives10.1016/j.jhazmat.2015.11.014 ↗
12. Preparation and Performance Study of a Self-embrittling Strippable Decontaminant with Controllable Morphology
13. Evaluation of physicochemical properties of radioactive cesium in municipal solid waste incineration fly ash by particle size classification and leaching tests10.1016/j.jenvman.2018.03.028 ↗
14. DirtyBomb (2004, July 15). NOVA Public Broadcasting System Program Transcript. Available online: http://www.pbs.org/wgbh/nova/transcripts/3007_dirtybom.html.
15. The use of the removable thin film coating technique as an alternative to traditional decontamination methods to mitigate and abate hazardous particulates10.1002/rem.20164 ↗
16. Polymeric coatings for surface-contamination and ecofriendly volume reduction of radinactive waste after use10.1016/j.pnucene.2017.09.002 ↗
17. Experimental study on hot-melt pressure sensitive coil material for decontaminating radioactive dust
18. Synthesis of Waterborne Polyurethane and the Properties of Strippable Coating
19. Preparation and Performance of One Kind Resin for Capturing and Encapsulating Radioactive Aerosols
20. Preparation and Characterization of P(AM-co-AA) for Capturing and Encapsulating Radioactive Aerosols
21. Fabrication of poly (methyl methacrylate)-block-poly (methacrylic acid) diblock copolymer as self-embrittling strippable coating for radioactive decontamination10.1246/cl.160195 ↗
22. Gertzmann, R., Petzoldt, J., and Miller, H. (2005). Emulsion Polymer for Stripping Coatings. (1,585,805A), CN Patent.
23. William, M.M., and Trachan, R.J. (1994). Water Stripping Coating Composition for Pressure-Sensitive Adhesives. (1,089,284A), CN Patent.
24. Yamashita, X.Y., Matsumoto, M., and Honggui, S.W. (1999). Water dispersion of peel coatings. (1,215,073A), CN Patent.
25. Application of SO42_/TiO2 solid superacid in decontaminating radioactive pollutants10.1016/j.jenvrad.2005.11.009 ↗
26. Synthesis of nano MoS2/TiO2 composite and its catalytic degradation effect on methylorange10.1007/s10853-010-4242-9 ↗
27. Fabrication of TiO2 /MoS2 @ zeolite photocatalyst and its photocatalytic activity for degradation of methyl orange under visible light10.1016/j.apsusc.2015.08.054 ↗
28. Synthesis and properties of novel UV curable strippable metallic coatings
29. Formulation and properties of PVC resin solventable plastics
30. Sol-gel method synthesis of high temperature stable macroporous TiO2
31. Research Status of Film Formation Theory of Polymer Emulsion
32. He, S.Z. (2019). Study on Preparation and Characterization of Waterborne Cellulose Acetate Emulsion, Shaanxi University of Science and Technology.