journal article·2021-04-29Open access

Effect of Rejuvenating Agent on the Pavement Properties of Cold Recycled Mixture with Bitmen Emulsion

Chun Li, Jian Ouyang, Peng Cao, Jingtao Shi, Wenting Yang, Yuqi Sha

Coatings· Volume 11· Issue 5

Abstract

A traditional cold recycled mixture with bitumen emulsion (CRMB) has a relatively low cracking resistance and moisture susceptibility, which greatly limits its application scope. A rejuvenating agent was employed to improve the pavement properties of CRMB. To avoid the rejuvenating agent having an adverse effect on the new bitumen, reclaimed asphalt pavement (RAP) was firstly treated by the rejuvenating agent, and the effect of rejuvenating time on the pavement properties of CRMB was investigated. Results indicate that the addition of a rejuvenating agent can greatly improve the ductility and moisture susceptibility of CRMB. Meanwhile, although the rejuvenating agent can soften aged bitumen, the addition of a rejuvenating agent can still increase the indirect tensile strength of CRMB and does not greatly reduce the rutting resistance of CRMB. This phenomenon exists because the rejuvenating agent can be both beneficial to the membrane structure of the bitumen emulsion mastic and aged bitumen. It can also greatly improve the bonding interface between RAP and the bitumen emulsion mastic. The rejuvenating time between RAP and the rejuvenating agent can affect the pavement properties of CRMB. To obtain better pavement properties, the optimum recommended rejuvenating time is between 5 and 7 days. Overall, the addition of rejuvenating agent can be a good choice to improve the pavement properties of CRMB.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

PetroChina Fuel Oil Limited Company Research Institute, Beijing 100195, China

School of Transportation and Logistics, Dalian University of Technology, Dalian 116024, China

College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China

School of Civil Engineering, Dalian University of Technology, Dalian 116024, China

School of Energy and Powder Engineering, Xi’an Jiaotong University, Xi’an 710049, China

Funding

Natural Science Foundation of Liaoning Province · National Natural Science Foundation of China

References (29)

Show source-provided references
1. Evaluation of mechanical performance of cement–bitumen-treated mate-rials through laboratory and in-situ testing10.1080/14680629.2016.1213506 ↗
2. Evaluation of Laboratory Coating and Compaction Procedures for Cold Mix Asphalt
3. Ministry of Transport of the People’s Republic of China (2008). Technical Specifications for Highway Asphalt Pavement Recycling.
4. Effect of Cement on Emulsified Asphalt Mixtures10.1007/s11665-007-9095-2 ↗
5. Laboratory studies to investigate the properties of novel cold-rolled asphalt containing cement and waste bottom ash
6. Effects on engineering properties of cement-treated road base with slow setting bitumen emulsion10.1080/10298436.2015.1065988 ↗
7. Micro hardness of interface between cement asphalt emulsion mastics and aggregates10.1617/s11527-009-9502-2 ↗
8. Ouyang, J., Yang, W., Chen, J., and Han, B. (2020). Effect of Superplasticizer and Wetting Agent on Pavement Properties of Cold Recycled Mixture with Bitumen Emulsion and Cement. J. Mater. Civ. Eng., 32.10.1061/(ASCE)MT.1943-5533.0003194 ↗
9. Effect of Water Content on Volumetric and Mechanical Properties of Cement Bitu-men Emulsion Mixture10.1061/(ASCE)MT.1943-5533.0002736 ↗
10. Review and evaluation of cold recycling with bitumen emulsion and cement for rehabilitation of old pavements
11. Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary Portland cement
12. Moisture damage potential of cold asphalt10.1080/10298430802169838 ↗
13. Influence of cement content and environmental humidity on asphalt emulsion and cement composites performance10.1617/s11527-012-9971-6 ↗
14. Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt10.1617/s11527-014-0512-3 ↗
15. Interaction mechanism of cement and asphalt emulsion in asphalt emulsion mixtures10.1617/s11527-013-0118-1 ↗
16. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗
17. Long-term performance and microstructure of asphalt emulsion cold recycled mixture with different gradations10.1016/j.jclepro.2019.01.103 ↗
18. Influence of gradations on performance of emulsified asphalt cold recycled mixture produced using vertical vibration compaction method10.1080/14680629.2019.1659174 ↗
19. Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures10.1016/j.matdes.2016.01.094 ↗
20. A procedure for characterizing the curing process of cold recycled bitumen emulsion mixtures10.1016/j.conbuildmat.2018.04.091 ↗
21. Research on development mechanism of early-stage strength for cold recycled asphalt mixture using emulsion asphalt10.1016/j.conbuildmat.2015.09.019 ↗
22. Effect of compaction energy on physical and mechanical performance of bitumen emulsion mortar10.1617/s11527-014-0488-z ↗
23. Strength improvement additives for cement bitumen emulsion mixture10.1016/j.conbuildmat.2018.11.280 ↗
24. Effects of Rejuvenating Agents on Superpave Mixtures Containing Reclaimed Asphalt Pavement10.1061/(ASCE)0899-1561(2007)19:5(376) ↗
25. Performance assessment of aged binder rejuvenated with Polanga oil
26. Cold recycling of reclaimed asphalt pavement towards improved engineering per-formance10.1016/j.jclepro.2017.10.132 ↗
27. Ministry of Transport of the People’s Republic of China (2011). Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering.
28. Ministry of Transport of the People’s Republic of China (2017). Specifications for Design of Highway Asphalt Pavement.
29. Ouyang, J., Zhao, J., and Tan, Y. (2018). Modeling Mechanical Properties of Cement Asphalt Emulsion Mortar with Different As-phalt to Cement Ratios and Temperatures. J. Mater. Civ. Eng, 30.10.1061/(ASCE)MT.1943-5533.0002480 ↗