A Comparison of the Performance of Two Kinds of Waterborne Coatings on Bamboo and Bamboo Scrimber
Source abstract
Abstract
For this paper, two kinds of waterborne coatings, polyurethane acrylate (PUA) and epoxy resin, were synthesized and then coated onto neat bamboo and bamboo scrimber (BS), respectively. The coating performance of the samples was investigated. The results showed that, for the two kinds of coatings, there was a chemical reaction occurring between both coatings and the substrates. The permeability with respect to bamboo was higher than that of BS, while that of the epoxy resin coating was better than PUA. However, the PUA film was smoother than epoxy resin. The epoxy resin coating on bamboo had the best adhesion, which was at a 1 level. The abrasion values of the four samples varied in the same substrate. A higher hardness of the coating film was obtained when coated with PUA. In general, the coating performance of bamboo scrimber was poorer than that of bamboo, either coated with PUA or epoxy resin. The epoxy resin had a better coating performance than PUA.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Institute of Wood Industry, Chinese Academy of Forestry, Haidian, Beijing 100091, China
Research Institute of Forestry New Technology, Chinese Academy of Forestry, Haidian, Beijing 100091, China
Department of Chemical Engineering, University of New Brunswick, Fredericton NB E3B 5A3, Canada
Funding
Yanglun Yu · Ling Long
References (34)
Show source-provided references
1. Present situation and outlook of bamboo resource utilization in China
2. A novel process to improve yield and mechanical performance of bamboo fiber reinforced composite via mechanical treatments10.1016/j.compositesb.2013.08.007 ↗
3. A low-technology approach toward fabrication of laminated bamboo lumber10.1016/j.conbuildmat.2011.10.046 ↗
4. 2D model of strength parameters for bamboo scrimber10.15376/biores.9.4.7073-7085 ↗
5. Effects of heat treatment on the properties of bamboo scrimber10.1007/s10086-016-1574-3 ↗
6. Engineered bamboo for structural applications10.1016/j.conbuildmat.2015.01.077 ↗
7. Surface chemical composition analysis of heat-treated bamboo10.1016/j.apsusc.2016.03.015 ↗
8. Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber10.1016/j.conbuildmat.2017.09.185 ↗
9. Flexural performance of bamboo scrimber beams strengthened with fiber-reinforced polymer10.1016/j.conbuildmat.2017.03.054 ↗
10. Bending properties evaluation of newly designed reinforced bamboo scrimber composite beams10.1016/j.conbuildmat.2017.03.052 ↗
11. Improvement of the water repellency, dimensional stability, and biological resistance of bamboo-based fiber reinforced composites10.1002/pc.24677 ↗
12. Fiber texture and mechanical graded structure of bamboo10.1016/S1359-8368(96)00020-0 ↗
13. Physical and mechanical properties of laminated bamboo board
14. Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties10.1016/j.conbuildmat.2016.10.069 ↗
15. Study of the system wood-coating material. I. wood-liquid coating material
16. New approaches in wood coating stabilization10.1007/s11998-007-9049-5 ↗
17. Surface modification of nano-alumina and its application in preparing polyacrylate water-based wood coating10.1515/polyeng-2013-0116 ↗
18. Study of the system wood-coating material. Part 2. Wood-solid coating material
19. Queant, C., Blanchet, P., Landry, V., and Schorr, D. (2018). Effect of adding UV absorbers embedded in carbonate calcium templates covered with light responsive polymer into a clear wood coating. Coatings, 8.10.3390/coatings8080265 ↗
20. Frigione, M., and Lettieri, M. (2018). Novel attribute of organic–inorganic hybrid coatings for protection and preservation of materials (stone and wood) belonging to cultural heritage. Coatings, 8.10.3390/coatings8090319 ↗
21. Development of green waterborne UV-curable vegetable oil-based urethane acrylate pigment prints adhesive: Preparation and application10.1016/j.jclepro.2018.01.193 ↗
22. (2000). ISO 15528:2000 Paints, Varnishes and Raw Materials for Paints and Varnishes-Sampling, ISO.
23. Xu, J., Wu, H., and Liu, R. (2018). Preparation and properties of light-resistant UV ink modified with nano-TiO2 on wood substrate. Surf. Eng.10.1080/02670844.2018.1541298 ↗
24. (2013). ISO 2409-2013 Paints and Varnishes-Cross-Cut Test, ISO.
25. (2016). ISO 7784-2-2016 Paints and Varnishes—Determination of Resistance to Abrasion—Part 2: Method With Abrasive Rubber Wheels and Rotating Test Specimen, ISO.
26. (2012). ISO 15184-2012 Paints and Varnishes—Determination of Film Hardness by Pencil Test, ISO.
27. Surface chemistry and moisture sorption properties of wood coated with multifunctional alkoxysilanes by sol-gel process10.1002/app.12142 ↗
28. Microstructural characterization of bamboo10.1023/B:JMSC.0000012943.27090.8f ↗
29. Effects of high temperature heat treatment on FTIR and XRD characteristics of bamboo bundles
30. Plasma surface modification and bonding enhancement for bamboo composites10.1016/j.compositesb.2017.11.025 ↗
31. Quantitative characterization of chemical degradation of heat-treated wood surfaces during artificial weathering using XPS10.1002/sia.5104 ↗
32. Effect of silane coupling agents on the properties of pine fibers/polypropylene composites10.1002/app.25104 ↗
33. Nanoscale structural and mechanical characterization of the cell wall of bamboo fibers10.1016/j.msec.2008.11.007 ↗
34. Nanoscale characterization of wood photodegradation using atomic force microscopy10.1007/s00107-008-0305-x ↗